AP230SO8

MMIC Product Features • 50 ~ 2000 MHz • GaAs MMIC • 38dBm Output IP3 • 17dB Gain • 21dBm P1dB • Single +5V Supply AP230SO8 Application • CDMA,W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier • 50Ω Telecommunication Systems Description Package : SOIC-8 AP230SO8 is a high linearity amplifier designed with GaAs MMIC. AP230SO8 is designed for applications such as GSM, CDMA, W-CDMA driver devices which require high IP3. AP230SO8 is in 8 pin, SOIC-8 package. ELECTRICAL CHARACTERISTICS Absolute Minimum and Maximum Ratings PARAMETER Device Voltage RF Input Power Storage Temperature UNIT VDC dBm MIN MAX +6 +10 -40 +125 ℃ Operating Ranges PARAMETER Operating Frequency Device Voltage Operational Temperature UNIT MHz VDC MIN 50 +5 -40 TYP MAX 2000 +5.3 +85 ℃ Electrical Specifications (Ta=+25℃, VDD=+5V, Fc=880 MHz ) PARAMETER Gain Input Return Loss Output Return Loss Output IP3 1dB Compression Point Noise Figure DC Current Supply Voltage Thermal Resistance(Rth) UNIT dB dB dB dBm dBm dB mA VDC +36 MIN 16 TYP 17.4 -23 -20 +38 +21 3.3 250 +5 57.5 270 MAX ℃/W OIP3 is measured with two tones, at an output power of 5dBm/tone separated by 1MHz ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC Application Circuit (900MHz) AP230SO8 S-Parameter vs. Frequency 20 M a g n i tu d e ( d B ) 10 O IP 3(d B m ) 45 40 35 30 25 800 OIP3 vs. Frequency 0 -10 -20 -30 -40 800 840 880 920 960 1000 840 880 920 960 1000 F r e q u e n c y (M H z ) F r e q u e n c y (M H z ) Noise Figure vs. Frequency 8 P1dB vs. Frequency 25 N o i s e F i g u r e(d B ) P 1d B ( d B m ) 6 20 4 15 10 2 0 800 840 880 920 960 1000 5 800 840 880 920 960 1000 F r e q u e n c y (M H z ) F r e q u e n c y (M H z ) ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC Application Circuit (1800MHz) AP230SO8 S-Parameter vs. Frequency 20 10 M ag n i tu d e (d B ) 35 0 -10 -20 -30 -40 1700 20 1700 O I P 3(d B m ) 30 25 40 OIP3 vs. Frequency 1740 1780 1820 1860 1900 1740 1780 1820 1860 1900 F r e q u e n c y (M H z ) F r q u e n c y (M Hz ) Noise Figure vs. Frequency 8 N o i s e F i g ur e(d B ) 6 4 2 0 1700 25 20 15 10 5 1700 P1dB vs. Frequency 1740 1780 1820 1860 1900 P 1d B ( d B m ) 1740 1780 1820 1860 1900 F r e q u e n c y (M Hz ) F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC Pin Description AP230SO8 Pin No 1 2 3 4 AMP2 8 7 6 5 Function RF IN(2) RF OUT(1) RF IN(1) RF OUT(2) GND GND 1 5 4 8 2, 3, 6, 7 Exposed slug AMP1 Package Dimensions (Type: SOIC-8) Recommended Pattern RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3