AP409

MMIC Product Features • 50 ~ 3500MHz • InGaP HBT MMIC • 33.5dBm Output IP3 • 15.5dB Gain • 18.8dBm P1 dB • On Chip Active bias • Pb Free / RoHS Standard AP409 Application • CDMA, W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package Type: SOT-89 Description AP409 is a gain block amplifier designed with InGaP HBT MMIC in a low cost SOT-89 package. This MMIC amplifier is designed for use as driver devices for infrastructure equipment in the 50~3500MHz Wireless technologies such as Cellular, GSM, PCS CDMA, W-CDMA. Specifications PARAMETER Gain (S21) Input Return Loss (S11) Output Return Loss (S22) Output 3rd Order Intercept Point (OIP3) Output 1dB compression Point (P1dB) Noise Figure DC Operating Current Supply Voltage Thermal Resistance (Rth) Test Condition ① 900MHz, Vdc=5V at 25℃ ② OIP3 is measured with two tones, at an output power of +5dBm/tone separated by 1MHz. Units dB dB dB dBm dBm dB mA Vdc ℃/W Min 14 Typ 15.5 -18 -20 Max 15.3 -22 -19 +30 +18 5.1 85 65 +4.8 150 Typ 15.2 -22 -19 +27 +16.5 5.1 52 +4.5 +30 +33.5 +18.8 5 55 70 +5 Absolute Maximum Ratings PARAMETER Operating Case Temperature (℃) Storage Temperature (℃) Supply Voltage Junction Temperature (℃) Rating -40 ~ +85 -50 ~ +150 +6 +220 Remark ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=5V, Id=70mA, Tc=25℃) OIP3 vs. Frequency 40 35 OIP3(dBm) 30 25 20 15 10 100 500 -40℃ 25℃ 85℃ 900 1900 2140 2400 2700 3000 Frequency(MHz) Gain vs. Frequency 17 16 Magnitude(dB) 15 14 13 12 11 10 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) -40℃ 25℃ 80℃ Input Return Loss vs. Frequency -5 -10 -15 -20 -25 -30 -35 -40 -45 0 Frequency(MHz) -40℃ 25℃ 85℃ -5 -10 -15 -20 -25 -30 -35 -40 -45 Output Return Loss vs. Frequency Magnitude(dB) Magnitude(dB) -40℃ 25℃ 85℃ 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) 500 1000 1500 2000 2500 3000 3500 Noise Figure vs. Frequency 6.5 22 20 P1dB(dBm) 18 16 14 12 10 100 500 P1dB vs. Frequency Noise Figure(dB) 6 5.5 5 4.5 4 3.5 100 500 900 1900 2140 2400 2700 900 1900 2140 2400 2700 3500 Frequency (MHz) Frequency(M Hz ) ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC Block Diagram AP409 Application Circuit +5V 0 L1 C1 Z=50 Z=50 C3 C4 C5 C2 RF Input L=3mm L=5mm RF Output Recommended Component Values 70MHz L1 C1,C2,C3 C4 C5 560nH 0.1uF 1000pF 4.7uF/16V 500MHz-3000MHz 100nH 1000pF 0.1uF 4.7uF/16V Recommended Bias Resistor Values Vsupply 6V 7V 8V 9V Rbias(5V) 14 28 42 57 Rbias(4.8V) 18 33 49 64 Rbias(4.5V) 28 48 67 86 ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=5V, Id=70mA, Tc=25℃) Frequency Gain S11 S22 OIP3 P1dB Noise Figure MHz dB dB dB dBm dBm dB 100 15.6 -11 -10 32.5 18 4.75 500 15.6 -17 -38 33.5 18.9 5 900 15.5 -18 -20 33.5 18.8 5 1900 14.8 -35 -13 32.5 18.3 5.2 2140 14.5 -33 -13 32 18.4 5.3 2400 14.4 -29 -13 31.5 18.4 5.3 2700 14.1 -26 -14 31.5 18.3 5.3 18 3500 13.5 -15 -18 Gain vs. Frequency 17 40 35 OIP3 vs. Frequency Magnitude(dB) 16 15 14 13 12 11 0 500 1000 1500 2000 2500 3000 3500 OIP3(dBm) 30 25 20 15 10 100 500 900 1900 2140 2400 2700 3000 Frequency(MHz) Frequency(MHz) Input Return Loss vs. Frequency 0 Output Return Loss vs. Frequency 0 Magnitude(dB) Magnitude(dB) -10 -20 -30 -40 -50 -60 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) -10 -20 -30 -40 -50 -60 0 500 1000 1500 2000 2500 3000 3500 Frequency(MHz) 70MHz Performance Typical Specifications 24 16 Magnitude(dB) 8 0 -8 -16 -24 -32 50 80 110 140 Frequency(MHz) 170 200 Frequency Gain(S21) Return Loss(S11) Return Loss(S22) OIP3 Noise Figure P1dB 50~200MHz 16dB -15dB -23dB 32.5dBm 4.7dB 19dBm S11 S21 S22 ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=4.8V, Id=65mA, Tc=25℃) Frequency Gain S11 S22 OIP3 P1dB Noise Figure MHz dB dB dB dBm dBm dB 500 15.5 -19 -31 30.5 18.1 5.1 880 15.3 -22 -19 30 18 5.1 960 15.3 -23 -17 30 18 5.1 1860 14.6 -27 -13 30 17.5 5.2 2140 14.3 -26 -14 29 17.1 5.2 2700 12.6 -26 -15 28.5 16.5 5.3 3500 12.2 -17 -10 28 16 5.3 S-Parameter vs. Frequency 20 10 M ag ni tud e(d B ) 0 -10 -20 -30 -40 500 OIP3 vs. Frequency 40 30 20 10 0 500 Noise Figure vs. Frequency OI P3(d B m) P1dB vs. Frequency 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M Hz ) 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M Hz ) Noise Figure vs. Frequency 8 N o i s e F i g ur e(d B ) 7 25 20 P1dB vs. Frequency 6 5 4 500 P1d B (d B m) 15 10 5 500 1000 1500 2000 2500 3000 3500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (MHz ) F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC AP409 Performance Charts (Vd=4.5V, Id=52mA, Tc=25℃) Frequency Gain S11 S22 OIP3 P1dB Noise Figure MHz dB dB dB dBm dBm dB 500 15.5 -19 -30 27.5 16.7 5.1 880 15.2 -22 -19 27 16.5 5.1 960 15.2 -23 -17 27 16.4 5.1 1860 14.5 -27 -13 26 15.6 5.2 2140 14.1 -26 -14 25 15.2 5.25 2700 12.4 -26 -15 24 14.9 5.27 3500 12 -17 -10 24 14.1 5.3 S-Parameter vs. Frequency 20 10 M ag ni tud e(d B ) 0 -10 -20 -30 -40 500 0 500 OI P3(d B m) 30 40 OIP3 vs. Frequency 20 10 1000 1500 2000 2500 3000 3500 F r e q u e n c y (MHz ) 1000 1500 2000 2500 3000 3500 F r e q u e n c y (M Hz ) Noise Figure vs. Frequency 8 N o i s e F i g ur e(d B ) 25 P1dB vs. Frequency 6 P1d B (d B m) 1000 1500 2000 2500 3000 3500 7 20 15 5 10 4 500 5 500 1000 1500 2000 2500 3000 3500 F r e q u e n c y (MHz ) F r e q u e n c y (M Hz ) ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3 MMIC AP409 Package Dimensions (Type: SOT-89) Pin No 1 2 3 4 Function Input Ground Output/Bias Ground ! ESD sensitive Observe precautions for handling, testing and packaging. Recommended Pattern Recommended Mounting Configuration RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.3