MU3541

Active Up Mixer Product Features • Integrated Monolithic GaAs MESFET • Active Mixer Packages Module • Surface Mount Hybrid Type & Reel Packing • No matching circuit needed • Lower Manufacturing Cost • Higher Productivity and Reliability • Very Low Noise Figure & Low Distortion • Pb Free / RoHS Standard MU3541 Application • Repeater • Base Station • RF Sub-Systems Package Type: HY-1 Description The IC operates from a positive +5V rail consuming 125 mA of current while only requiring a 1±2 dBm The MCM is implemented with reliable and mature GaAs MESFET technology. LO drive. Specifications (IF70MHz) (Typ.) IF Frequency (MHz) 50 ~ 200 LO Frequency (MHz) 3330~3430 RF Frequency (MHz) 3400-3600 Conversion Gain (dB) 3 (dBm) 20 OIP3 Out P1dB (dBm) 5 (Operating Temperature: -30°C~+70°C) LO to RF Leakage (dBm) -15 IF to RF Leakage (dBm) -65 Vdd /Idd 5V /125mA Functional Diagram 3 IF INPUT ` Functional Pin Layout 9 RF OUTPUT Pin No. 1 or 5 3 7 9 Function Vdd+5V IF In LO In RF Out Ground 7 LO INPUT 2,4,6,8,10 Package Dimensions (Type: HY-1) Top ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com Side Recommended Pattern ▪ All specifications may change without notice. ▪ Version 6.05 Active Up Mixer Typical Performance at 25℃ MU3541 Test Condition: 25℃, IF = 70MHz@-10dBm, LO = 3330~3530MHz@2dBm, RF = 3400~3600MHz ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 6.05 Active Up Mixer MU3541 RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 6.05