PD23C2

2Way Power Divider Product Features • Passive Integration on Silicon • Low Insertion Loss • High Isolation • Solder Pad • Good Balance • Low Cost • Pb Free / RoHS Compliant PD23C2 Application • Repeater • Base Station • RF Sub-Systems Package : SOIC-8 Description The 2 way power divider is low loss, high isolation, good matching, and phase / amplitude. The PD23C2 is a monolithic two-way in phase hybrid junction tuned for the 2200~2400MHz band. Specifications at 25℃ PARAMETER Frequency Range Insertion Loss Input Return Loss Output Return Loss Isolation Phase difference Amplitude difference Remarks Units MHz dB dB dB dB Deg. dB MHz Min 2200 Typ Max 2400 0.3 20 20 20 22 27 27 1 0.1 2300 0.5 3 0.3 Block Diagram & Pin Out Absolute Maximum Ratings Output_1 Input Output_2 Parameter Input Power Operating Temperature Storage Temperature Value 2W -40 ~ +85℃ -65 ~ + 150℃ ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.5 2Way Power Divider PD23C2 Typical Performance Data at 25℃ (SOIC-8 Package) Insertion Loss vs. Frequency -3.0 Input Return Loss vs. Frequency 0 Input Return Loss(dB) -5 -10 -15 -20 -25 -3.2 Insertion(dB) -3.4 -3.6 -3.8 -4.0 2.10 2.15 2.20 2.25 Freq(GHz) 2.30 2.35 2.40 2.10 2.15 2.20 2.25 Freq(GHz) 2.30 2.35 2.40 Output Return Loss vs. Frequency 0 Output Return Loss(dB) -5 -10 Isolation(dB) -15 -20 -25 -30 -35 -40 -45 2.10 2.15 2.20 2.25 Freq(GHz) 2.30 2.35 2.40 0 -5 -10 -15 -20 -25 -30 -35 -40 2.10 2.15 Isolation vs. Frequency 2.20 2.25 Freq(GHz) 2.30 2.35 2.40 Package Dimensions (Type: SOIC-8) Recommended Pattern RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.5