PD36T2

2Way Power Divider Product Features • Passive Integration on Silicon • Low Insertion Loss • High Isolation • Solder Pad • Good Balance • Low Cost PD36T2 Application • Repeater • Base Station • RF Sub-Systems Package : SOT-23-6L Description The 2 way power divider is low loss, high isolation, good matching, and phase / amplitude. The PD36T2 is a monolithic two-way in phase hybrid junction tuned for the 3400~3700MHz band. Specifications at 25℃ PARAMETER Frequency Range Insertion Loss Input Return Loss Output Return Loss Isolation Phase difference Amplitude difference Remarks Units MHz dB dB dB dB Deg. dB MHz Min 3400 Typ Max 3700 0.4 17 20 15 20 23 17 1 0.1 3600 0.6 3 0.3 Block Diagram & Pin Out Output_1 Input Output_2 Absolute Maximum Ratings Parameter Input Power Operating Temperature Storage Temperature Value 1W -40 ~ +85℃ -65 ~ + 150℃ ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 1.2 2Way Power Divider PD36T2 Typical Performance Data at 25℃ (SOT23-6L Package) Insertion Loss vs. Frequency -3.0 Input Return Loss vs. Frequency 0 Input Return Loss(dB) -5 -10 -15 -20 -25 -3.2 Insertion(dB) -3.4 -3.6 -3.8 -4.0 3.40 3.45 3.50 3.55 Freq(GHz) 3.60 3.65 3.70 3.40 3.45 3.50 3.55 Freq(GHz) 3.60 3.65 3.70 Output Return Loss vs. Frequency 0 Output Return Loss(dB) -5 -10 -15 -20 -25 3.40 3.45 3.50 3.55 Freq(GHz) 3.60 3.65 3.70 Isolation(dB) 0 Isolation vs. Frequency -5 -10 -15 -20 3.40 3.45 3.50 3.55 Freq(GHz) 3.60 3.65 3.70 Package Dimensions (Type: SOT23-6L) RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 1.2