RT230PD

Power Transistor Product Features • 50 ~ 4000 MHz • 18dB Gain@900MHz • 34.5dBm P1dB@900MHz • 47dBm Output IP3 • GaAs HFET RT230PD Application • CDMA,W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier • ISM • MMDS • Wi-Fi, Wi-Max Package : SP-12 Description The RT230PD is designed for base stations and cell extenders and operating frequency range is from 50MHz to 4GHz. RT230PD is GaAs HFET in SP-12 type package which has superior performance against the heat at high temperature for its high reliability. It also has high efficiency, high gain and has a strong advantage using it as drive device at high frequency. RT230PD is 100% RF&DC tested. Absolute Maximum Ratings Parameter Drain to Source Voltage Gate to Source Voltage Range Power Dissipation Storage Temperature Channel Temperature Symbol Vds Vgs Pt Tstg Tch Rating +12 0 to -5.0 7.5 -65 to +175 +175 Unit V V W ℃ ℃ Electrical Characteristics Parameter Saturated Drain Current Transconductance Pinch-off Voltage Breakdown Voltage Gate-Source Breakdown Voltage Gate-Drain Output Power @ 1dB G.C.P Power Gain @ 1dB G.C.P Power added efficiency Thermal Resistance Symbol Idss gm Vp Bvgs Bvgd P1dB G1dB ηadd Rth Min -1 -18 -18 34 Typ 1100 790 -1.8 Max Unit mA mS -3 -25 -25 V V V dBm dB % 34.5 14.5 50 18 20 ℃/W * Test Conditions : Vd=9V, Id=450mA, Ta=+25℃, Frequency=2.3GHz ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor Electrical Specifications Parameter Frequency Range Gain Input Return Loss Output IP3 1dB Compression Point Channel Power Noise Figure DC Current Supply Voltage RT230PD UNIT MHz dB dB dBm dBm dBm dB mA VDC 900 18 -15 +47 +34.5 27.5 2.5 450 +9 Typical 1900 16.5 -20 +47 +34.5 25.5 2.5 450 +9 3.0 450 +9 2600 14.5 -20 +47 +34 *Test Conditions : (Vd = +9V, Id = 450mA, Ta=+25℃ ) *OIP3 is measured with two tones, at an output power of 20dBm/tone separated by 1MHz ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(824 ~ 896MHz) Performance Charts (Vd = +9V, Id = 450mA, Ta = 25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power@-45dBc ACPR MHz dB dB dBm dBm dB dBm 824 18.5 -15 860 18.3 -20 34.5 47 2.5 27.5 896 18 -16 Application Circuit C3 + C2 C1 R1 L2 C4 C5 C6 C7 + - RF IN Z1 L1 C8 L3 Z2 R2 C9 Z3 RT230PD Z4 C10 Z5 C11 RF OUT Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8,C10 C9 C11 R1 R2 Value 100pF 1000pF 0.1uF 4.7uF 30pF 5pF 4pF 51 Ω 8.2 Ω Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 1608 Text L1 L2 L3 Z1 Z2 Z3 Z4 Z5 WⅹL Value 18nH 18nH 3.9nH Size(mm) 1608 2520 1608 1.4 ⅹ2.0 1.4 ⅹ1.5 1.4 ⅹ2.0 1.4ⅹ6.0 1.4ⅹ3.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(890 ~ 960MHz) Performance Charts (Vd = +9V, Id = 450mA, Ta = 25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power@-45dBc ACPR MHz dB dB dBm dBm dB dBm 890 18.2 -14 925 18 -18 34.5 47 2.5 27.5 960 17.8 -16 Application Circuit ( 890 ~ 960MHz ) C3 + C2 C1 R1 L2 C4 C5 C6 C7 + - RF IN Z1 L1 C8 L3 Z2 R2 C9 Z3 RT230PD Z4 C10 Z5 C11 RF OUT Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8,C10 C9 C11 R1 R2 Value 100pF 1000pF 0.1uF 4.7uF 30pF 5pF 4pF 51 Ω 8.2 Ω Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 1608 Text L1 L2 L3 Z1 Z2 Z3 Z4 Z5 WⅹL Value 18nH 18nH 3.3nH Size(mm) 1608 2520 1608 1.4 ⅹ2.0 1.4 ⅹ1.5 1.4 ⅹ2.0 1.4ⅹ6.0 1.4ⅹ3.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(1700 ~ 1800MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power@ -45dBc ACPR MHz dB dB dBm dBm dB dBm 1700 16.8 -13 1750 17.3 -17 34.5 47 2.5 27.5 1800 16.5 -11 Application Circuit ( 1700 ~ 1800MHz ) C3 + C2 C1 L1 L2 C4 C5 C6 C7 + - RF IN Z1 C8 R1 RT230PD Z3 C11 Z4 C10 RF OUT Z2 C9 Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 Value 100pF 1000pF 0.1uF 4.7uF 10pF 3.6pF 1.5pF 5pF Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 Text R1 L1 L2 Z1 Z2 Z3 Z4 WⅹL Value 51 Ω 18nH 18nH Size(mm) 1608 1608 2520 1.4 ⅹ7.0 1.4 ⅹ2.0 1.4 ⅹ2.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(1800 ~ 1900MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power@ -45dBc ACPR MHz dB dB dBm dBm dB dBm 1700 16.9 -10 1750 17 -22 34.5 47 2.5 27.5 1800 16.6 -13 Application Circuit ( 1800 ~ 1900MHz ) C3 + C2 C1 L1 L2 C4 C5 C6 C7 + - RF IN Z1 C8 R1 RT230PD Z3 C11 Z4 C10 RF OUT Z2 C9 Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 Value 100pF 1000pF 0.1uF 4.7uF 10pF 3.0pF 1.5pF 5pF Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 Text R1 L1 L2 Z1 Z2 Z3 Z4 WⅹL Value 51 Ω 18nH 18nH Size(mm) 1608 1608 2520 1.4 ⅹ7.0 1.4 ⅹ2.0 1.4 ⅹ2.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(1900 ~ 2000MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power@ -45dBc ACLR MHz dB dB dBm dBm dB dBm 1900 16.5 -15 1950 16.7 -24 34.5 47 2.5 25 2000 15.9 -12 Application Circuit ( 1900 ~ 2000MHz ) C3 + C2 C1 L1 L2 C4 C5 C6 C7 + - RF IN Z1 C8 R1 RT230PD Z3 C11 Z4 C10 RF OUT Z2 C9 Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 Value 100pF 1000pF 0.1uF 4.7uF 10pF 2.7pF 1.5pF 5pF Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 Text R1 L1 L2 Z1 Z2 Z3 Z4 WⅹL Value 51 Ω 18nH 18nH Size(mm) 1608 1608 2520 1.4 ⅹ7.0 1.4 ⅹ2.0 1.4 ⅹ2.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(2100 ~ 2200MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure Channel Power @ -45dBc ACLR MHz dB dB dBm dBm dB dBm 2100 16.5 -13 2150 16.3 -15 34.5 47 2.5 25 2200 16.2 -14 Application Circuit ( 2100 ~ 2200MHz ) C3 + C2 C1 L1 L2 C4 C5 C6 C7 + - RF IN Z1 C8 R1 RT230PD Z3 C11 Z4 C10 RF OUT Z2 C9 Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 Value 100pF 1000pF 0.1uF 4.7uF 10pF 2.4pF 1.5pF 5pF Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 Text R1 L1 L2 Z1 Z2 Z3 Z4 WⅹL Value 51 Ω 18nH 18nH Size(mm) 1608 1608 2520 1.4 ⅹ7.0 1.4 ⅹ2.0 1.4 ⅹ2.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(2300 ~ 2400MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure MHz dB dB dBm dBm dB 2300 15.2 -10 2350 15.5 -20 34.5 47 2.8 2400 15 -10 Application Circuit ( 2300 ~ 2400MHz ) C3 + C2 C1 R1 L2 C4 C5 C6 C7 + - RF IN Z1 L1 C8 Z2 L3 Z3 C9 RT230PD Z4 C11 Z5 C10 RF OUT Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 R1 Value 100pF 1000pF 0.1uF 4.7uF 10pF 2.2pF 1.5pF 5pF 51 Ω Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 1608 Text L1 L2 L3 Z1 Z2 Z3 Z4 Z5 WⅹL Value 18nH 18nH 2.7nH Size(mm) 1608 2520 1608 1.4 ⅹ1.0 1.4 ⅹ4.0 1.4 ⅹ1.0 1.4ⅹ1.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(2500 ~ 2700MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure MHz dB dB dBm dBm dB 2500 14.7 -7 2600 14.7 -25 34 47 3.0 2700 14.2 -7 Application Circuit ( 2500 ~ 2700MHz ) C3 + C2 C1 R1 L2 C4 C5 C6 C7 + - RF IN Z1 L1 C8 Z2 L3 Z3 C9 RT230PD Z4 C11 Z5 C10 RF OUT Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 R1 Value 100pF 1000pF 0.1uF 4.7uF 10pF 1.8pF 1.5pF 5pF 51 Ω Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 1608 Text L1 L2 L3 Z1 Z2 Z3 Z4 Z5 WⅹL Value 18nH 18nH 2.7nH Size(mm) 1608 2520 1608 1.4 ⅹ1.0 1.4 ⅹ4.0 1.4 ⅹ1.0 1.4ⅹ1.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Application Circuit for RT230PD(3400 ~ 3600MHz) Performance Charts (Vd=9V, Id=450mA, Ta=25℃) Typical Specifications Frequency Range Gain Input Return Loss Output P1dB Output IP3 Noise Figure MHz dB dB dBm dBm dB 3400 11.9 -7 3500 12 -10 33 46 3.5 3600 11.9 -7 Application Circuit ( 3400 ~ 3600MHz ) C3 + C2 C1 R1 L2 C4 C5 C6 C7 + - RF IN Z1 L1 C8 Z2 L3 Z3 C9 RT230PD Z4 C11 Z5 C10 RF OUT Bill of Material Text C4 C1,C5 C2,C6 C3,C7 C8 C9 C10 C11 R1 Value 100pF 1000pF 0.1uF 4.7uF 5pF 1.0pF 0.5pF 4pF 51 Ω Size(mm) 1608 1608 1608 3216 1608 1608 1608 1608 1608 Text L1 L2 L3 Z1 Z2 Z3 Z4 Z5 WⅹL Value 18nH 18nH 1.5nH Size(mm) 1608 2520 1608 1.4 ⅹ1.0 1.4 ⅹ4.0 1.4 ⅹ1.0 1.4ⅹ1.0 1.4ⅹ7.0 Circuit Board Material : FR4(εr=4.7), 0.8mm ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor RT230PD Biasing Circuits for GaAs HFET Power Amplifiers This circuit below normally operates GaAs Power Amplifier and it is one of the circuits for stable operation and satisfactory performance. It is structured by the parts for constant current operation. Main functions of this circuit : Negative Voltage Generator Power Sequencing mode(Negative before positive) Constant operating current Constant operating current circuit is structured by low cost components. It will operate of constant current regardless of any temperature changes. R3 should carefully be taken by power dissipation. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2 Power Transistor PN Q1 Q2 Q3 R1 R2 R3 R4 R5 R6 R7 C1,C2 RT230PD Maker IRF Rohm Linear Tech Rohm Rohm Rohm Rohm Rohm Rohm Rohm Murata Taiyo Yuden Taiyo Yuden Value N/A N/A N/A 10kΩ 24Ω 0.5Ω 1.5KΩ 1KΩ 430Ω 10kΩ 0.1uF Description P-channel MOSFET, IRLML5203 Dual PNP, UMT1N DC-DC Converter With Sequency mode, LTC1261 0603, 1/16W 0603, 1/16W 1206, 1 W 0603, 1/16W 0603, 1/16W 0603, 1/16W 0603, 1/16W 0603 1206 0805 Quantity 1 1 1 1 1 1 1 1 1 1 1 3 1 C3,C4,C5 4.7uF L1 1uH Package Dimensions (Type:SP-12) Function Input Output , Bias Ground Pin No. 7, 8, 9 1, 2, 3 4, 5, 6, 10, 11, 12 Backside Copper RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 5.2