RTP26020-10

GaN-SiC Pallet Amplifier Product Features • Doherty amplifier design • GaN on SiC HEMT • Small and light weight • 50 Ohm Input/Output impedance matched • Highly reliable and rugged design • High efficiency • 16W typical PAVG RTP26020-10 Application • WiMAX DPD amplifier • General purpose RF amplifier Description The RTP26020-10 is designed for RF system application frequencies from 2496MHz to 2690MHz. This Pallet Amplifier uses GaN on SiC HEMT technology which performs high breakdown voltage, high linearity, high efficiency. The RTP26020-10 is DPD application amplifier. Electrical Specifications @ VDD=+30VDC, T=25°C, 50Ω System PARAMETER Frequency Range Output Power Output Power @ Psat G.C.P Small Signal Gain Small Signal Gain Flatness Gain Variation ACLR @ WiMAX 10MHz 2FA Input VSWR Operating Voltage Efficiency @ Pout 10Watt Symbol BW PAVG Psat SSG ΔG ΔGt ACLR S11 VDC E Min 2496 20 - Typ 16 100 25 ± 1.0 ± 3.0 -25dBr Max 2690 20 ±2 Unit MHz Watt Watt dB dB dB dBr 28 1.5:1 30 30 2.0:1 - Volt % ※ Test Signal Condition : WCDMA 4FA Environmental Characteristics PARAMETER Operating Temperature Storage Temperature Symbol Tc Ts Min -20 -30 Typ - Max +50 +60 Unit °C °C Mechanical Specifications PARAMETER Dimensions ( L x W x H ) Cooling Value 105 x 60 x 18.5 External Heat sink + airflow Units mm Limits Max ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 0.1 GaN-SiC Pallet Amplifier RF Interface Connectors Pin # 1 2 RF IN RF OUT Description RTP26020-10 Specifications RF Input signal from TRx B’d RF Output signal to TDD switch Outline Drawing RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ rfsales@rfhic.com ▪ All specifications may change without notice. ▪ Version 0.1