CGR-0118ZTR7

CGR-0118Z Dual CATV 5MHz to 65MHz CATV Amp IC CGR-0118Z DUAL CATV 5MHz to 65MHz CATV AMP IC Package: SOIC 8 Product Description RFMD’s CGR-0118Z is a high performance 75 Ω push-pull InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias netwrok provides stable current over temperature and process variations. Designed to run over a wide range of supply voltage, from 5V to 12V, the CGR-0118Z does not require a bias resistor as compared to typical Darlington amplifiers. The CGR-0118Z is designed for 75 Ω return path applications where linear performance is needed over the frequency range 5MHz to 65MHz. Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT InP HBT RF MEMS LDMOS 4 5 3 6 2 7 Features Flat Gain Response: 25.4 ± 0.3dB Excellent OIP3: 37.5dBm Superior Return Loss: >20dB Extremely Low CSO/CTB: -80/-67dBc Low Noise Figure: 3.0dB Single Supply: 5V to 12V Low DC Current: 130mA Amplifier Configuration 1 8 Applications CATV Return Path Amplifier CATV Line Amplifier Optical RX/TX Parameter Electrical Characteristics Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point Supply Voltage Operating Current Min. Specification Typ. 25.4 ±0.3 20 20 3 -60 -63 -80 73.5 37.5 12 130 Max. Unit dB dB dB dB dBc dBc dBc dBc dBmV dBm V mA Condition VCC =12V, TA =25°C, 75 Ω System 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 14 CGR-0118Z Absolute Maximum Ratings Parameter DC Supply (VCC) RF Input Voltage (Single Tone) (VIN) Operating Case Temperature Range (TC) Storage Temperature Range (TSTG) RF Input (RFIN) Rating 14 65 -40 to +100 -40 to +150 +24 Unit VDC dBmV °C °C dBmV Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Parameter Electrical Characteristics Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point Supply Voltage Operating Current 5V Specification Table Gain Gain Slope Input Return Loss Output Return Loss Noise Figure Composite Triple Beat Cross Modulation Composite Second Order 1dB Gain Compression Point Output 3rd Order Intercept Point Supply Voltage Operating Current Min. Specification Typ. 25.4 ±0.3 20 20 3 -67 -63 -80 73.5 37.5 8 130 25.4 ±0.3 20 20 2.7 -60 -63 -80 74 40 5 262 Max. Unit dB dB dB dB dBc dBc dBc dBc dBmV dBm V mA Condition VCC =8V, TA =25°C, 75 Ω System 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) VCC =5V, TA =25°C, 75 Ω System dB dB dB dB dBc dBc dBc dBc dBmV dBm V mA 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz 5MHz to 65MHz T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel T7-T13 50dBmV/Channel 65MHz 5MHz, 65MHz (5dBm/tone at output, 1MHz spacing) 2 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z Typical Performance Curves (TA =25°C) Output Return Loss VDD=8V 0 -5 -10 -15 -20 Input Return Loss VDD=12V 0 -5 -10 -15 -20 dB -25 -30 -35 -40 -45 -50 0 10 20 30 40 50 60 70 dB -25 -30 -35 -40 -45 -50 0 10 20 30 40 50 60 70 Frequency Frequency Output Return Loss VDD=12V 0 -5 -10 -15 5.0 4.5 4.0 3.5 3.0 Noise Figure VDD=12V dB -20 -25 -30 -35 -40 0 10 20 30 40 50 60 70 dB 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 80 Frequency Frequency CSO VDD=12V 100 90 80 70 60 100 90 80 70 60 CTB VDD=12V dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 Frequency Frequency Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 14 CGR-0118Z Typical Performance Curves (TA=25°C) XMOD VDD=12V 100 90 80 70 60 -15 0 -5 -10 Input Return Loss VDD=8V dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 dB -20 -25 -30 -35 -40 0 10 20 30 40 50 60 70 Frequency Frequency Gain VDD=8V 30 0 -5 25 -10 -15 -20 Output Return Loss VDD=8V 20 dB 15 dB -25 -30 10 -35 -40 -45 5 0 0 10 20 30 40 50 60 70 -50 0 10 20 30 40 50 60 70 Frequency Frequency Noise Figure VDD=8V 5.0 4.5 4.0 3.5 3.0 100 90 80 70 60 CSO VDD=8V dB 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 80 dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 Frequency Frequency 4 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z Typical Performance Curves (TA=25°C) CTB VDD=8V 100 90 80 70 60 100 90 80 70 60 XMOD VDD=8V dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 dBc 50 40 30 20 10 0 0 10 20 30 40 50 60 Frequency Frequency Gain VDD=5V 30 0 -5 25 -10 -15 -20 Input Return Loss VDD=5V 20 dB 15 dB -25 -30 10 -35 -40 -45 5 0 0 10 20 30 40 50 60 70 -50 0 10 20 30 40 50 60 70 Frequency Frequency Output Return Loss VDD=5V 0 -5 -10 -15 -20 5.0 4.5 4.0 3.5 3.0 Noise Figure VDD=5V dB -25 -30 -35 -40 -45 -50 0 10 20 30 40 50 60 70 dB 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 60 70 Frequency Frequency Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 14 CGR-0118Z Typical Performance Curves (TA=25°C) CSO VDD=5V 100 90 80 70 60 100 90 80 70 60 CTB VDD=5V dB 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 dB 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Frequency Frequency XMOD VDD=5V 100 90 80 70 60 dB 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Frequency 6 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z Pin 1 2 3 4 5 6,7 8 EPAD Function RFFB RFIN RFIN RFFB RFOUT BYPASS RFOUT GND Description Feedback pin. External DC-blocking capacitor is required. RF input pin. External DC-blocking capacitor is required. Same as pin 2. Same as pin 1. RF output and bias pin (open collector). AC ground/Bypass. Same as pin 5. Exposed area on the bottom side of the package must be soldered to the ground plane of hte board for optimum thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended land pattern. Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 14 CGR-0118Z Pin Assignment C+ OUT+ IN+ BYPASS IN- BYPASS C- OUT- Outline Dimensions D3 X SYMBOL E3 8 SOIC MIN 0.054 0.001 0.014 0.189 0.150 MAX 0.068 0.004 0.019 0.196 0.157 PIN NO.1 ID MARK Gauge Plane Seating Plane 0.010 A A1 B D E e T B TOP VIEW L DETAIL "A" "A" 0.015±0.004 x45° C T H 0.229 0.244 0.050 BSC e C 0.0075 0.0098 L X 0.020 0° 7° 0.040 8° BSC 0.0215 REF A A1 H T T 0.130 Ref. NOTE : 1. TOP PACKAGE SURFACE TO BE MATTE FINISH VDI 24~27. 2. BOTTOM PACKAGE SURFACE TO BE MATTE FINISH VDI 8~11. 0.095 Ref. BOTTOM VIEW EXPOSED PADDLE 3. DIMENSION ARE EXCLUSIVE MOLD FLASH AND GATE BURR. 4. FOOT LENGTH MEASURING IS BASED ON THE GAUGE PLANE METHOD. 8 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z 12V Application Schematic JP2 VDD JP1 GND C7 1 uF C8 0.1 uF C6 10 uF J1 IN L1 10 uH C1 3.3 pF T1 XFM-0201-1WH C2 1 uF C4 1 uF R2 100 Ω 1 2 3 4 8 7 6 5 C12 1 uF T2 XFM-0201-1WH C14 2 pF J2 OUT U1 CGR-0118Z C3 1 uF C5 1 uF R1 100 Ω L2 10 uH C11 10 uF C9 0.1 uF C10 2 pF C3 1 uF 8V Application Schematic JP2 VDD C10 10 uF C9 1 uF C8 0.1 uF JP1 GND C2 0.1 uF R1 2.7 kΩ C1 3.3 pF T1 XFM-0201-1WH C3 1 uF C4 1 uF C7 1 uF R3 100 Ω 1 CGR-0118Z 2 3 4 8 7 6 5 C14 1 uF L3 10 uH C11 0.1 uF C12 2 pF C13 10 uF J1 IN L1 10 uH C15 1 uF T2 XFM-0201-WH C16 2 pF J2 OUT C6 1 uF R2 2.7 kΩ C5 0.1 uF R4 100 Ω Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 14 CGR-0118Z 5V Application Schematic JP2 VDD C10 10 uF C9 1 uF C8 0.1 uF JP1 GND C2 0.1 uF R1 10 kΩ C1 3.3 pF T1 XFM-0201-1WH C3 1 uF C4 1 uF C7 1 uF R3 100 Ω 1 CGR-0118Z 2 3 4 8 7 6 5 L2 10 uH J1 IN L1 10 uH C15 1 uF T2 XFM-0201-WH C16 2 pF J2 OUT C6 1 uF R2 10 kΩ C5 0.1 uF R4 100 Ω C14 1 uF JP3 VDD 10 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z 12V Evaluation Board Layout Value 2pF 3.3pF 0.1uF 1uF 10uF 100 Ohms 10uH (1008 PS-103 KLB) RFMD™ XFM-0201-1WH Qty. 2 1 2 7 2 2 2 2 Location C10, C14 C1 C8, C9 C2, C3, C4, C5, C7, C12, C13 C6, C11 R1, R2 L1, L2 T1, T2 Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 11 of 14 CGR-0118Z 8V Evaluation Board Layout Value 2pF 3.3pF 0.1uF 1uF 10uF 2.7 k Ohms 100 Ohms 10uH (1008 PS-103 KLB) RFMD™ XFM-0201-1WH Qty. 2 1 4 7 2 2 2 2 2 Location C12, C16 C1 C2, C5, C8, C11 C3, C4, C6, C7, C9, C14, C15 C10, C13 R1, R2 R3, R4 L1, L2 T1, T2 12 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922 CGR-0118Z 5V Evaluation Board Layout Value Qty. Location 2pF 1 C16 3.3pF 1 C1 0.1uF 3 C2, C5, C8 1uF 7 C3, C4, C6, C7, C9, C14, C15 10uF 1 C10 10 k Ohms 2 R1, R2 100 Ohms 2 R3, R4 10uH (1008 PS-103 KLB) 2 L1, L2 RFMD™ XFM-0201-1WH 2 T1, T2 Prelim DS090922 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 13 of 14 CGR-0118Z Ordering Information Part Number CGR-0118ZSB CGR-0118ZSQ CGR-0118ZSR CGR-0118ZTR7 CGR-0118ZTR13 CGR-0118ZPCBA-410 CGR-0118ZPCBA-411 CGR-0118ZPCBA-412 Description 5pcs Sample Bag 25pcs Sample Bag Lead Free, RoHS Compliant Lead Free, RoHS Compliant Lead Free, RoHS Compliant 5MHz to 65MHz 12V Evaluation Board 5MHz to 65MHz 8V Evaluation Board 5MHz to 65MHz 5V Evaluation Board Reel Size (in) N/A N/A 7 7 13 N/A N/A N/A Devices/Reel N/A N/A 100 750 2500 N/A N/A N/A 14 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS090922