R2005240P12

R2005240P12 R2005240P12 GaAs Reverse Hybrid 5MHz to 200MHz Package: SOT-115J The R2005240P12 is a hybrid reverse amplifier. The part employs a GaAs die. It has extremely low distortion and superior return loss performance. The part also provides optimal reliability with low noise and is well suited for 5MHz to 200MHz CATV amplifiers for reverse channel systems. Features ■ Excellent Linearity ■ Superior Return Loss Performance ■ Extremely Low Distortion ■ Optimal Reliability ■ Low Noise ■ Unconditionally Stable Under All Terminations ■ 24.2dB Typ. Gain at 200MHz ■ 360mA Max. at 12VDC Applications ■ 5MHz to 200MHz CATV Amplifier For Reverse Channel Systems Ordering Information R2005240P12 Box with 50 pieces Absolute Maximum Ratings Parameter RF Input Voltage (single tone) DC Supply Over-Voltage (5 minutes) Rating Unit 70 dBmV 15 V Storage Temperature -40 to +100 °C Operating Mounting Base Temperature -30 to +100 °C Caution! ESD sensitive device. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2011/65/EU. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implie RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com. ® DS140205 ® RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 3 R2005240P12 Nominal Operating Parameters Specification Parameter Unit Min Typ Condition Max V+ = 12V; TMB = 30°C; ZS = ZL = 75Ω General Performance 23.5 24.2 24.5 dB f = 5MHz 23.5 24.2 25.0 dB f = 200MHz -0.5 0.0 0.5 dB ±0.5 dB Power Gain [1] Slope Flatness of Frequency Response f = 5MHz to 200MHz Input Return Loss 20.0 dB Output Return Loss 20.0 dB 3.8 5.0 dB f = 10MHz 1.8 2.3 dB f = 200MHz 355.0 360.0 mA Noise Figure Total Current Consumption (DC) 350.0 V+ = 12V; TMB = 30°C; ZS = ZL = 75Ω Distortion Data 5MHz to 200MHz CTB -70 dBc XMOD -65 dB CSO -70 dBc d2 -75 dBc VO 65 dBmV 26 ch flat; V0 = 50dBmV[2] [3] DIM = -60dB[4] 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 26 channels, NTSC frequency raster: T7 - T13 (7.0MHz to 43.0MHz), 2 – 6 (55.25MHz – 83.25MHz), A – 11 (121.25MHz – 199.25MHz), +50dBmV flat output level. 3. f1 = 83.25MHz; V1 = 50dBmV; f2 = 109.25MHz; V2 = 50dBmV; fTEST = f1 + f2 = 192.5MHz. 4. f1 = 187.25MHz; V1 = V0; f2 = 194.25MHz; V2 = V1 - 6dB; f3 = 196.25MHz; V3 = V1 - 6dB; fTEST = f1 + f2 - f3 = 185.25MHz according to DIN45004B. Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the carrier being tested. RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com. DS140205 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 3 R2005240P12 Package Drawing (Dimensions in millimeters) I U 123 5 7 89 C E J S P R M K O T Q øG N D 0 B 5 10mm scale H L F A Notes: European Projection Pinning: Pin Name 1 Input 2-3 GND 4 5 +VB 6 Nominal Min Max A 44,6 ± 0,2 44,4 44,8 B 13,6 ± 0,2 13,4 44,4 13,8 C 20,4 ± 0,5 19,9 20,9 D 8 ± 0,15 7,85 8,15 E 12,6 ± 0,15 12,45 12,75 F 38,1 ± 0,2 37,9 38,3 G 4 +0,2 / -0,05 3,95 4,2 H 4 ± 0,2 3,8 4,2 I 25,4 ± 0,2 25,2 25,6 J UNC 6-32 - - K 4,2 ± 0,2 4,0 4,4 L 27,2 ± 0,2 27,0 27,4 M 11,6 ± 0,5 11,1 12,1 N 5,8 ± 0,4 5,4 6,2 O 0,25 ± 0,02 0,23 0,27 P 0,45 ± 0,03 0,42 0,48 Q 2,54 ± 0,3 2,24 2,84 R 2,54 ± 0,5 2,04 3,04 S 2,54 ± 0,25 2,29 2,79 7-8 GND T 5,08 ± 0,25 4,83 5,33 9 Output U 5,08 ± 0,25 4,83 5,33 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com. DS140205 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 3