0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
RF2174PCBA

RF2174PCBA

  • 厂商:

    RFMD(威讯)

  • 封装:

  • 描述:

    RF2174PCBA - 3V DCS POWER AMPLIFIER - RF Micro Devices

  • 数据手册
  • 价格&库存
RF2174PCBA 数据手册
Preliminary RF2174 3V DCS POWER AMPLIFIER 2 Typical Applications • 3V DCS1800 (PCN) Cellular Handsets • 3V DCS1900 (PCS) Cellular Handsets • 3V Dual-Band/Triple-Band Handsets • Commercial and Consumer Systems • Portable Battery-Powered Equipment • GPRS Compatible 2 POWER AMPLIFIERS Product Description The RF2174 is a high power, high efficiency power amplifier module offering high performance in GSM or GPRS applications. The device is manufactured on an advanced GaAs HBT process, and has been designed for use as the final RF amplifier in DCS1800/1900 hand-held digital cellular equipment and other applications in the 1700MHz to 2000MHz band. On-board power control provides over 65dB of control range with an analog voltage input, and provides power down with a logic "low" for standby operation. The device is self-contained with 50 Ω input and the output can be easily matched to obtain optimum power and efficiency characteristics. The RF2174 can be used together with the RF2173 for dual-band operation. The device is packaged in an ultra-small plastic package, minimizing the required board space. Optimum Technology Matching® Applied Si BJT Si Bi-CMOS 2 3.75 0.75 0.50 0.45 0.28 0.80 TYP 1 1 3.75 + 1.60 4.00 12° 1.50 SQ INDEX AREA 3 3.20 4.00 1.00 0.90 0.75 0.65 NOTES: 1 Shaded Pin is Lead 1. 2 Dimension applies to plated terminal and is measured between 0.10 mm and 0.25 mm from terminal tip. 0.05 0.00 The terminal #1 identifier and terminal numbering convention 3 shall conform to JESD 95-1 SPP-012. Details of terminal #1 identifier are optional, but must be located within the zone indicated. The identifier may be either a mold or marked feature. 4 5 Pins 1 and 9 are fused. Package Warpage: 0.05 max. ü Package Style: LCC, 16-Pin, 4x4 GaAs HBT SiGe HBT GaAs MESFET Si CMOS Features • Single 2.7V to 4.8V Supply Voltage • +33dBm Output Power at 3.5V • 27dB Gain with Analog Gain Control • 51% Efficiency VCC2 VCC2 VCC2 14 GND 1 AT_EN RF IN GND1 2 3 4 5 VCC1 16 15 13 12 11 10 RF OUT 2F0 • 1700MHz to 1950MHz Operation RF OUT RF OUT • Supports DCS1800 and PCS1900 6 APC1 7 APC2 8 VCC 9 GND Ordering Information RF2174 RF2174 PCBA 3V DCS Power Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www.rfmd.com Rev A6 010720 2-231 RF2174 Absolute Maximum Ratings Parameter Supply Voltage Power Control Voltage (VAPC) Enable Voltage (VAT_EN) DC Supply Current Input RF Power Duty Cycle at Max Power Output Load VSWR Operating Case Temperature Storage Temperature Preliminary Rating -0.5 to +6.0 -0.5 to +3.0 -0.5 to +3.0 1500 +13 50 10:1 -40 to +85 -55 to +150 Unit VDC V V mA dBm % °C °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s). 2 POWER AMPLIFIERS Parameter Specification Min. Typ. Max. Unit Condition Temp=25 °C, VCC =3.5V, VAPC1,2 =2.6V, VAT_EN =2.6V, PIN =+6dBm, Freq=1710MHz to 1910MHz, 25% Duty Cycle, pulse width=1154 µs See application schematic for tuning details. A different tuning is required. Temp=25 °C, VCC =3.5V, VAPC1,2 =2.6V Temp=+25 °C, VCC =3.2V, VAPC1,2 =2.6V Temp=+85 °C, VCC =3.2V, VAPC1,2 =2.6V Temp=25 °C, VCC =2.7V, VAPC1,2 =2.6V Temp=+85 °C, VCC =2.7V, VAPC1,2 =2.6V At POUT,MAX, VCC =3.5V At POUT,MAX, VCC =3.0V POUT =+20dBm POUT =+10dBm Overall Operating Frequency Range Usable Frequency Range Maximum Output Power 1710 to 1785 1850 to 1910 1700 to 2000 +33 +32.8 +31.5 +31 +30 51 51 15 10 +7 MHz MHz MHz dBm dBm dBm dBm dBm % % % % dBm dBm +32 +31.5 Total Efficiency +29.5 45 Recommended Input Power Range Output Noise Power +5 +9 -79 Forward Isolation Second Harmonic Third Harmonic All Other Non-Harmonic Spurious Input Impedance Input VSWR Output Load VSWR Output Load Impedance 10:1 -37 -40 -60 -65 -30 -35 -45 -50 -36 dBm dBm dBc dBc dBm Ω RBW=100kHz, 1805MHz to 1880MHz and 1930MHz to 1990MHz, POUT,MIN
RF2174PCBA 价格&库存

很抱歉,暂时无法提供与“RF2174PCBA”相匹配的价格&库存,您可以联系我们找货

免费人工找货