RF2367PCBA-41X

RF2367 0 RoHS Compliant & Pb-Free Product Typical Applications • TDMA/CDMA/FM PCS Tx Amplifier • Low Noise Transmit Driver Amplifier • 2.4GHz WLAN Systems Product Description The RF2367 is a low noise CDMA/TDMA/GSM PA driver amplifier with a very high dynamic range designed for transmit digital PCS applications with frequency ranges between 1700MHz and 2000MHz. The device functions as an outstanding PA driver amplifier in the transmit chain of digital subscriber units where low transmit noise power is a concern. The IC includes a power down feature that can be used to completely turn off the device. The RF2367 is featured in a standard SOT23-6 plastic package. 1.80 1.40 0.50 0.35 0.10 MAX. PCS CDMA/TDMA/GSM1800 3V PA DRIVER AMPLIFIER • GSM1800 Driver Amplifier • General Purpose Amplification • Commercial and Consumer Systems TEXT* 1.90 3.10 2.70 3.00 2.60 Shaded lead is pin 1. Dimensions in mm. 0.90 0.70 1.30 1.00 9° 1° 0.25 0.10 0.37 MIN. *When Pin 1 is in upper left, text reads downward (as shown). Optimum Technology Matching® Applied Si BJT Si Bi-CMOS InGaP/HBT GaAs HBT SiGe HBT GaN HEMT GaAs MESFET Si CMOS SiGe Bi-CMOS Package Style: SOT23-6 Features • Low Noise and High Intercept Point • Adjustable Bias Current • Power Down Control • Single 2.5V to 6.0V Power Supply • 150MHz to 2500MHz Operation • Extremely Small SOT23-6 Package GND 1 6 RF OUT GND 2 5 GND RF IN 3 4 PD Ordering Information RF2367 PCS CDMA/TDMA/GSM1800 3V PA Driver Amplifier RF2367PCBA-41X Fully Assembled Evaluation Board RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www.rfmd.com Functional Block Diagram Rev A3 060925 4-385 RF2367 Absolute Maximum Ratings Parameter Supply Voltage Input RF Level Storage Temperature Rating -0.5 to +8.0 +10 -40 to +150 Unit VDC dBm °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. RoHS marking based on EUDirective2002/95/EC (at time of this printing). However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s). Parameter Operating Range Overall Frequency Range Supply Voltage (VCC) Power Down Voltage (VPD) Total Current Consumption Operating Ambient Temperature Input Impedance Output Impedance Specification Min. Typ. Max. 150 to 2500 2.5 2.7 24 -40 50 50 37 6.0 2.9 0.9 45 10 +85 Unit MHz V V V mA μA oC Condition For normal operation For power down operation VCC =3.0V, VPD =2.8V VCC =3.0V, VPD