RF3025SPDT, High Isolation, Single Control, Absorptive Switch
RF3025
SPDT, HIGH ISOLATION, SINGLE CONTROL, ABSORPTIVE SWITCH
Package: QFN, 16-Pin, 3 mm x 3 mm
Product Description
The RF3025 is a high isolation single-pole double-throw (SPDT) absorptive switch designed for general purpose switching applications requirinng moderate insertion loss and power handling capability. It features singlebit control with operation as low as 3 V. This GaAs pHEMT switch is housed in a compact 3 mm, 16-pin, leadless QFN package.
Features
Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT InP HBT RF MEMS LDMOS
10 MHz to 6 GHz Operation 0.5 dB Insertion Loss at 1 GHz 1.1 dB Insertion Loss at 6 GHz Terminated Off State 58 dB Isolation at 1 GHz 39 dBm Isolation at 6 GHz 3 V Minimum Voltage 50 dBm IP3 at 5 V Cellular Handset Applications Antenna Tuning Applications IEEE802.11b/g WLAN Applications Cellular Infrastructure Applications
Applications
Parameter
Insertion Loss
Min.
Specification Typ.
0.45 0.5 0.55 0.8 1.1 18 13 14 16 17 12 58 52 48 42 39 30 50
Max.
0.8
Unit
dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm
Condition
Freq = 10 MHz to 1.0 GHz Freq = 1.0 GHz to 2.0 GHz Freq = 2.0 GHz to 3.0 GHz Freq = 3.0 GHz to 5.0 GHz Freq = 5.0 GHz to 6.0 GHz Freq = 10 MHz to 1.0 GHz, Freq = 1.0 GHz to 3.0 GHz Freq = 3.0 GHz to 6.0 GHz Freq = 0.5 GHz to 0.8 GHz Freq = 0.8 GHz to 1.0 GHz Freq = 1.0 GHz to 3.0 GHz Freq = 3.0 GHz to 6.0 GHz Freq = 0.5 GHz to 1.0 GHz Freq = 1.0 GHz to 2.0 GHz Freq = 2.0 GHz to 3.0 GHz Freq = 3.0 GHz to 5.0 GHz Freq = 5.0 GHz to 6.0 GHz Freq = 1.8 GHz Freq = 0.5 GHz to 2.5 GHz, 1 MHz spacing, 10 dBm/tone
Return Loss Return Loss into Off Port
Isolation 50
P0.1dB IP3
200 300 uA IDD, Supply Current 20 uA IC, Control Current TON, TOFF 35 nS TRISE, TFALL 120 Test Conditions: VDD = 5 V, 25°C, 50 , with application circuit with 100 pF DC blocking capacitors
50% of VCTRL to 10/90% of RF 10/90% RF
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
DS091125
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
1 of 6
RF3025
Absolute Maximum Ratings
Parameter
Supply Voltage VDD Control Voltage (VC) RF Input Power (on state) RF Input Power (terminated port) Operating Temp Range (TL) Storage Temp Moisture Sensitivity Level
Rating
5.5 5.5 32 24 -40 to +85 -55 to +150 MSL2
Unit
V V dBm dBm °C °C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EU Directive 2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice.
Truth Table
VC
0 1 Logic ‘0’: 0 V < VC < 1.0 V Logic ‘1’: 2 V < VC < 5 V
RFC-RF1
OFF ON
RFC-RF2
ON OFF
Evaluation Board Layout
All Capacitors are 100 pF
2 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS091125
RF3025
Evaluation Board Schematic
DS091125
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
3 of 6
RF3025
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Function GND GND RFC GND VDD GND GND RF1 GND GND GND GND RF2 GND GND VC Paddle Description
Ground. Ground. RF Common. External DC Block required. Ground. Supply Voltage. Ground. Ground. RF Port 1. External DC Block required. Ground. Ground. Ground. Ground. RF Port 2. External DC Block required. Ground. Ground. Control Voltage. Ground.
Package Drawing
Dimensions in millimeters Refer to drawing posted at www.rfmd.com for tolerances.
4 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS091125
RF3025
Typical Performance at 25°C, VDD = 5 V
DS091125
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
5 of 6
RF3025
Ordering Information
Ordering Code
RF3025 RF3025SR RF3025TR7 RF3025PCK-410
Description
Sample bag with 25 pieces 7” Reel with 100 pieces 7” Reel with 2500 pieces 500 MHz to 4000 MHz PCBA with 5-piece sample bag
6 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS091125
