RF5626

RF56265.0V, 4.9 GHz to 5.85GHz Power Amplifier RF5626 Proposed 5.0V, 4.9 GHz TO 5.85GHz POWER AMPLIFIER Package: Laminate Package, 10-pin, 4mm x 4mm x 0.975mm Input Match 10 1 RFIN Features VCC VCC 6 5 Interstage Match 7 PDET Interstage Match 8 Bias PDOWN 4  VCC 3  Vreg 9  GND Single Voltage: 5.0V 24.5dBm Linear Output Power 50 Input and Output High Gain - 32dB typical 2  VCC Interstage Match RFOUT Applications   WLAN 11a/n Output Match Commercial and Consumer Systems Functional Block Diagram Product Description The RF5626 is a fully integrated MMIC which is in a 4mm x 4mm laminate package. This fully integrated MMIC is intently specified to address the general market for high power, high band (4.9GHz to 5.85GHz) 802.11a/n WLAN systems. The RF5626 is a WLAN MMIC PA with integrated detector and integrated input/ouput match to 50 Ordering Information RF5626 RF5626PCKA-410 Power Amplifier Fully Assembled Evaluation Board Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT  SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MEMS LDMOS RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Prelim DS110311 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 8 RF5626 Proposed Absolute Maximum Ratings Parameter Rating Unit Supply Voltage (RF Applied) -0.5 to +5.25 V Supply Voltage (No RF Applied) -0.5 to +6.0 V DC Supply Current TBD mA Input RF Power with 50 Output Load TBD dBm Input RF Power with Non-50 Output Load TBD dBm Operating Ambient Temperature -30 to +85 °C Storage Temperature -40 to +150 °C Specification Min. Typ. Max. Parameter Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Unit Condition T=25 °C, VCC =5.0V, VREG =3.0V, PDOWN =3.0V, using a standard IEEE802.11a waveform at 54Mbps, 64 QAM, unless otherwise noted. Typical Conditions Frequency Output Power 4900 5150 MHz 5150 5850 MHz 24.5 dBm De-rated performance VCC =5.0V, VREG =ON EVM 3 % At rated POUT, VCC =5V Gain 32 dB At rated POUT, 11a modulation Gain Variation 2.5 dB Power Supply VCC 5 V Quiescent Current 500 mA Operation Current 600 mA At VCC =5V, 11a modulation Leakage 100 A At VCC =5V, VREG =0.2V VREG 3.0 V Input Return Loss 15 dB Second Harmonic (FC=5.3GHz to 5.85GHz 2 of 8 -43 dBm At VCC =5V At rated POUT, measured in 1MHz RSB 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Prelim DS110311 Proposed Pin 1 2 3 4 Function RFIN GND VREG PDOWN 5 6 7 8 9 10 Pkg Base PDET RFOUT VCC VCC VCC VCC GND Prelim DS110311 RF5626 Description RF input port - DC blocked and 50internally matched. Ground connection. Bias control pin - requires a regulated supply to maintain nominal bias current. Power down pin - apply