RF6263

RF6263 3V 900MHZ LINEAR POWER AMPLIFIER MODULE RoHS Compliant & Pb-Free Product Package Style: QFN, 16-Pin, 3x3 VCC2L 14 NC Features Input Internally Matched@50 Ω Output Internally Matched 23% Linear Efficiency @ 19dBm 40% Linear Efficiency @ 28dBm -50dBc ACPR @ 885kHz 18mA Idle Current in LPM NC 1 VREG 2 VMODE 3 RF IN 4 16 15 NC 13 NC Bias 12 RF OUT 11 VCC2 10 VCC2 9 VCC2 5 VCC1 6 NC 7 NC 8 GND Applications 3 V CDMA/AMPS Cellular Handset 3 V CDMA2000/1XRTT Cellular Handset 3 V CDMA2000/1X-EV-DO USCellular Handset Spread-Spectrum System Functional Block Diagram Product Description The RF6263 is a high-power, high-efficiency linear amplifier module specifically designed for 3V handheld systems. The device is manufactured on an advanced third generation GaAs HBT process, and was designed for use as the final RF amplifier in 3V IS-95/CDMA2000-1X/ AMPS handheld digital cellular equipment, spread-spectrum systems, and other applications in the 824MHz to 849MHz band. The RF6263 has a digital control pin which when enabled will allow the amplifier to operate up to 19dBm output power with reduced current consumption. The low power mode current consumption can be reduced by more than 50% that of a standard power amplifier. The RF6263 is assembled in a 16-pin, 3mmx3mm, QFN package. Ordering Information RF6263 RF6263PCBA-41X 3V 900MHz Linear Power Amplifier Module Fully Assembled Evaluation Board Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. Rev A0 DS070622 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 8 RF6263 Absolute Maximum Ratings Parameter Supply Voltage (RF off) Supply Voltage (POUT ≤ 31dBm) Control Voltage (VREG) Input RF Power Mode Voltage (VMODE) Operating Temperature Storage Temperature Moisture Sensitivity Level (IPC/JEDEC J-STD-20) Rating +8.0 +5.2 +3.9 +10 +3.9 -30 to +110 -40 to +150 MSL 2 @ 260°C Unit V V V dBm V °C °C The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RoHS status based on EUDirective2002/95/EC (at time of this document revision). Caution! ESD sensitive device. Parameter High Power Mode - CDMA (VMODE Low) Operating Frequency Range Linear Gain Second Harmonics Third Harmonics Maximum Linear Output Linear Efficiency Maximum ICC ACPR @ 885kHz ACPR @ 1.98MHz Input VSWR Stability in Band Stability out of Band Noise Power Min. Specification Typ. Max. Unit Condition T=25oC Ambient, VCC =3.4V, VREG =2.8V, VMODE =0V, and POUT =28dBm for all parameters (unless otherwise specified). 824 28 -35 -40 28 40 465 -50 -58 2:1 849 -30 -30 MHz dB dBc dBc % mA dBc dBc 6:1 10:1 -133 dBm/Hz No oscillation>-70dBc No damage At 45MHz offset. T=25oC Ambient, VCC =3.4V, VREG =2.8V, VMODE =2.8V, and POUT =19dBm for all parameters (unless otherwise specified). Low Power Mode - CDMA (VMODE High) Operating Frequency Range Linear Gain Maximum Linear Output Linear Efficiency Maximum ICC ACPR @885kHz ACPR @1.98MHz Input VSWR Output VSWR Stability 19 23 100 70 -49 -62 2:1 6:1 10:1 % mA mA dBc dBc 824 18 849 MHz dB POUT =16dBm No oscillation>-70dBc No damage 2 of 8 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Rev A0 DS070622 RF6263 Parameter FM Mode Operating Frequency Range AMPS Maximum Output Power AMPS Efficiency AMPS Gain AMPS Second Harmonics AMPS Third Harmonics 824 30.5 50 28 -35 -40 3.2 3.4 55 18 2.5 500 6 40 0.2 0 2.75 2.7 0 2.0 2.85 2.0 0.5 2.95 3.0 0.5 3.0 -30 -30 4.2 dBc dBc V mA mA mA uA uS uS uA V V V V V High Gain Mode Low Gain Mode VMODE =low and VREG =2.8V VMODE =high and VREG =2.8V VMODE =high 849 MHz dBm % Min. Specification Typ. Max. Unit Condition T=25oC Ambient, VCC =3.4V, VREG =2.8V, VMODE =0V, and POUT =30.5dBm for all parameters (unless otherwise specified). Power Supply Supply Voltage High Gain Idle Current Low Gain Idle Current VREG Current VMODE Current RF Turn On/Off Time DC Turn On/Off Time Total Current (Power Down) VREG Low Voltage VREG High Voltage (Recommended) VREG High Voltage (Operational) VMODE Voltage Rev A0 DS070622 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 8 RF6263 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pkg Base Function NC VREG VMODE RF IN VCC1 NC NC NC VCC2 VCC2 VCC2 RF OUT NC VCC2L NC NC GND Description No connection. Do not connect this pin to any external circuit. Regulated voltage supply for amplifier bias circuit. In power down mode, both VREG and VMODE need to be LOW (