SBB-3089Z

SBB-3089Z 50MHz to 6000MHz InGaP HBT Active Bias Gain Block Preliminary SBB-3089Z 50MHz to 6000MHz InGaP HBT ACTIVE BIAS GAIN BLOCK RoHS Compliant and Pb-Free Product Package: SOT-89 Product Description RFMD’s SBB-3089Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature and process Beta variations. The SBB-3089Z product is designed for high linearity 5V gain block applications that require excellent gain flatness, small size, and minimal external components. It is internally matched to 50 Ω. Gain and Return Loss VS = 5V, IS = 42mA Features Single Fixed 5V Supply Patented Self Bias Circuit and Thermal Design Gain=16.4dBm at 1950MHz P1dB =15.2dBm at 1950MHz OIP3 =29.5dBm at 1950MHz Robust 1000V ESD, Class 1C HBM MSL 1 Moisture Rating Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT dB 30.0 20.0 S21 10.0 Bias Tee Data, ZS = ZL = 50 0.0 , TL = 25°C Applications PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite Wideband Instrumentation 4.0 5.0 6.0 SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MEMS -10.0 S11 -20.0 S22 -30.0 0.0 1.0 2.0 3.0 Frequency (GHz) Parameter Small Signal Gain Min. Specification Typ. 16.6 16.4 16.3 15.6 15.2 15.4 30.0 29.5 29.5 21.0 25.5 3.9 4.2 42.0 Max. Unit dB dB dB dBm dBm dBm dBm dBm dBm dB dB dB V mA mA °C/W Condition 850MHz 1950MHz 2400MHz 850MHz 1950MHz 2400MHz 850MHz 1950MHz 2400MHz 1950MHz 1950MHz 1950MHz RDC =20 Ω, VS =5.0V RDC =20 Ω, VS =5.0V Per user preference via RDC Junction to lead Output Power at 1dB Compression Output Third Order Intercept Point Input Return Loss Output Return Loss Noise Figure Device Operating Voltage 4.3 Device Operating Current Operational Current Range 30 46 Thermal Resistance 80 Test Conditions: VD =4.2V ID =42mA TL =25°C OIP3 Tone Spacing=1MHz RDC =20 Ω Bias Tee Data ZS =ZL =50 Ω POUT per tone=-5dBm RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. EDS-105803 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 6 SBB-3089Z Absolute Maximum Ratings Parameter Max Device Current (lD) Max Device Voltage (VD) Max RF Input Power* (See Note) Max Junction Temperature (TJ) Operating Temperature Range (TL) Max Storage Temperature ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level Preliminary Rating 100 6 +20 +150 -40 to +85 +150 Class 1C MSL 1 Unit mA V dBm °C °C °C Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. *Note: Load condition ZL =50 Ω Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD