TQM7M9053

TQM7M9053 RFMD + TriQuint = Qorvo Quad-Band GSM-EDGE & Tri-Band W / CDMA / HSPA+ / LTE Applications      Functional Block Diagram GSM / EDGE / WEDGE WCDMA B1 / 8 or B1 / 5 WCDMA B1 / 5 / 8 (w/ External Switch) HSDPA / HSUPA / HSPA+ LTE / EVDO Rev A / B B1&B5 CPL OUT RF IN UMTS HB RF IN GSM HB RF OUT UMTS HB B1 PA RF OUT UMTS LB B8 PA Product Features             DCS/PCS PA Quad-Band Linear GSM / EDGE UMTS B1 and B5 / 8 Input Power Controlled – GMSK and 8PSK GSM LB Has 2 Modes – HP, LP GSM HB Has 2 Modes – HP, LP W/CDMA Has 2 Modes – HP, MP HBT / PHEMT / CuFlip® PA Technology Integrated Coupler Built-In Voltage Regulator 50 Ω Input and Output Impedance Lead-free 260 °C / RoHS / Halogen-free 24 Pin 5 x 7.5 x 0.89 mm Package RF OUT GSM HB RF IN GSM LB GSM850/900 PA RF IN UMTS LB RF OUT GSM LB CPL IN General Description The TQM7M9053 is a fully matched multimode multiband Power Amplifier Module that supports Quadband GSM/EDGE Linear, W/CDMA & LTE Band 1, and low band WCDMA/LTE (externally tuned for either Band 5 or Band 8). The GSM PA output power is controlled by the input power coming from the transceiver in both GMSK and 8PSK modes. The 2-Gain state WCDMA PA operates in HPM and MPM to maximize talk time over the entire range of operating conditions. It also includes a coupler and builtin regulator, ideal for today’s extremely small data enabled phones. The TQM7M9053 is designed on TriQuint’s GaAs HBT technology with CuFlip® assembly offering state of the art reliability, temperature stability and ruggedness. Its RF performance meets the stringent linearity requirements for multi-mode operation. Ordering Information Part No. Description TQM7M9053 QB EDGE+ Tri-Band WCDMA MM P Standard T/R size = 2500 pieces on a 7” reel Datasheet: Rev. E 04-23-15 © 2015 TriQuint Semiconductor, Inc - 1 of 15 - Disclaimer: Subject to change without notice www.triquint.com / www.qorvo.com