ANT
POWER
SYNC
C
RELAY 1
RELAY 2
RELAY 3
RELAY 4
ERASE
TIMER SELECT
SIGNAL TEST
RELAY 3
FUSE
RELAY 2
FUSE
FUSE
FUSE
RELAY 1
RELAY 4
FUSE
Fig 1.1
B
A
LOAD
230V INPUT
SUPPLY
QS-ESPRIT-1
Sync/Pair Button – Press once to auto pair. See
Advanced operation for other pairing options.
Status LEDs– Flash when
signals are sent/received
Erase Button – Press and hold to erase all pairings, see
advanced operation for individual erase
Timer Select Button – Used to select timer mode
Mag sync – Touch a
magnet to the plastic
case in the cross
hatched area to
replicate the sync
button on board
without opening the
case
Signal Test mode – Press to enter signal test mode
Momentary/Latching Jumper Links – It is possible to set the relay switches on
the ELITE receiver to either momentary or latching operation.
Latching (link fitted) - One press for on, one press for off.
Momentary (link removed) - On while button is held only.
To set a relay switch to either momentary/latching choose the associated link cap.
NOTE: If link is changed, power cycle the receiver (turn off/on) otherwise it will
stay in the same mode it was previously set in.
POWER
RELAY 1
RELAY 2
RELAY 3
RELAY 4
SYNC
8
ERASE
7
TIMER
6
TEST
5
4
RELAY 3
FUSE
RELAY 2
FUSE
FUSE
FUSE
RELAY 1
3
RELAY 4
2
FUSE
L
N
1
E
L N E
L N E
L N E
L N E
Relay switch terminals:
Output Fuses must be 4A
(Slow blow fuses recommended)
230Vac power
input
Earth
Neutral
Live
Power input fuse – must be 500mA
(Fast blow fuse recommended)
很抱歉,暂时无法提供与“ESPRIT-4SL4”相匹配的价格&库存,您可以联系我们找货
免费人工找货