FM-103C4-433NB

103 & 107 SERIES RADIO TRANSMITTER ENCODERS • • • • • • • • • Highly Secure Protocol Frequency Options 433, 433NB, 458, 868MHz RF Power (ERP) From 0.25 To 500mW Range 100m To 6Km Led Indication of Transmission Directly Compatible With Keeloq Decoder Power Saving Auto Shut Off Feature Automatically Transmits Battery Low Condition. Range; ⇒ 433MHz Upto 200 Metres ⇒ 433NB Upto 1000 Metres ⇒ 458MHz Upto 6,000 Metres 103 Series Encoders • • • • • • • • Aluminium IP65 Rated Enclosure Dimensions 164 x 82 x 32 4, 8 And 15 Switch Options Custom Membrane Option 103 Series 103 Series 107 Series Encoders Polypropylene IP65 Rated Enclosure Dimensions 250 x 90 x 45 4, 8 And 14 Switch Options Custom Membrane Option The RF Solutions 103 and 107 series radio transmitter encoders may be supplied at one of several frequencies and with several different switch options. Supplied in either a rugged aluminium or Polypropylene IP65 rated enclosures, these encoders are complete and ready to operate. Power supply is by 2 x PP3 batteries. Each encoder may be used with one of RF Solutions decoders. When paired with one of the RF Solutions Decoders, a complete high security “code hopping” remote control system may be achieved. Custom solutions may also be supplied unique to customer specific requirements. Please contact RF Solutions for further information. 107 Series DS103_3 Jan ‘01 ©2001 Reg. No. 227 4001, ENGLAND Page 1 103 & 107 SERIES RADIO TRANSMITTER ENCODERS Operation The Tx encoder transmits the KEELOQ code for as long as any push-button switch is depressed. Operation of the Tx encoder buttons will cause either a momentary or a latching action at the Rx decoder, depending on the configuration of the Rx decoder. Low Battery When the unit measures a low battery voltage level, the transmit LED flashes during transmission, and the data transmitted includes a ‘Low battery’ status flag to the receiver decoder. Power Supply The circuit has been designed to operate from 2 PP3 Batteries. Always use Alkaline for long battery life.. Note: reverse voltage polarity connection will cause damage to the circuit. Antenna An external ¼ wave flexi antenna is supplied with this product. This has been optimised to provide maximum range. License Exemption The transmitter encoders use ECM compliant radio transmitter modules and comply with ETSI330-220. KEELOQ Protocol Configuration All devices are supplied with a RF Solutions manufacturers ID, directly compatible for use with RF Solutions decoders. Each encoder is supplied ready programmed with a unique random serial number. The decoder has the ability to memorise this serial number using a simple learn procedure (please see decoder datasheet). How does KEELOQ technology work? KEELOQ is based on a code hopping algorithm which provides Rock Solid Security. KEELOQ uses a programmable 64-bit encryption key that is unique to each device to generate 32-bit hopping code. The key length and hopping code combination reduces the possibility of unwanted access, due to code grabbing and code scanning, to essentially zero. Such CIA-like levels of security are desirable, but many manufacturers would expect them to be cost-prohibitive. KEELOQ offers the solution for affordable, Rock Solid Security that is the future of technology for the cars, homes and offices we wish to protect. Programming the manufacturers ID / Custom Protocol Configuration Access to the to the HCS360 KEELOQ encoder is through the connector J8. For supply of custom programmed product please see the form ‘KEELOQ configuration template’ this is the information we require in order to supply custom programmed devices. DS103_3 Jan ‘01 ©2001 Reg. No. 227 4001, ENGLAND Page 2 103 & 107 SERIES RADIO TRANSMITTER ENCODERS PCB Mechanical Details TOP VIEW J2 EXTERNAL SWITCH HEADER J8 HCS360 Programming PADS RF 173 / 418 / 433 / 458 / 868 MHz TRANSMITTERS 127mm MATRIX KEYBOARD HEADER J9 +12V GND J1 PP3 BATTERY PP3 BATTERY 76mm Absolute Maximum Ratings Supply Voltage (VCC to GND) Storage Temperature Operating Temperature +5.5 to +25 Volts -25°C to +80°C 0°C to +55°C ELECTRICAL CHARACTERISTICS Supply Voltage Supply Current : 433MHz 458MHz Frequency for Std 433MHz Frequency for 433NB Unit Frequency RF Output Power (ERP) @ 433 MHz RF Output Power (ERP) @ 433NB RF Output Power (ERP) @ 458 MHz MIN 8 11 150 432.90 434.475 - TYPICAL 13 18 180 433.920 434.525 458.850 MAX 24 25 220 434.100 434.575 10 10 500 DIMENSION V MA MA MA MHz MHz MHz mW mW mW License Exemption The radios transmitters used have been designed to meet ETSI300-220, EN50081-1, EN50082-1 EMC directive and are DTI approved under MPT1329 for licence free use. DS103_3 Jan ‘01 ©2001 Reg. No. 227 4001, ENGLAND Page 3 103 & 107 SERIES RADIO TRANSMITTER ENCODERS Ordering Information Standard 433MHz Series Encoders Part Number FM-103C4-433 FM-103C8-433 FM-103C15433 Description FM Encoder 4 Sw FM Encoder 8 Sw FM Encoder 15 Sw Freq (MHz) 433.92 433.92 433.92 Range** (Metres) 200 200 200 Compatible Decoders 001 Series 008 Series U105C4A 433MHz Narrow Band Series Encoders Part Number FM-103C4-433NB FM-103C8-433NB FM-103C15-433NB Description FM Narrow Band Enc 4 Sw FM Narrow Band Enc 8 Sw FM Narrow Band Enc 15 Sw Freq (MHz) 434.525 434.525 434.525 Range** (Metres) 1000 1000 1000 105C4A-433NB series Compatible Decoders 458MHz Series Encoders Part Number FM-103C4-458NB FM-103C8-458NB FM-103C15-458NB Description FM Encoder 4 Sw FM Encoder 8 Sw FM Encoder 15 Sw Freq (MHz) 458.850 458.850 458.850 Range** (Metres) 6000 6000 6000 105C4A-458F series Compatible Decoders ** Range stated is optimum, direct line of sight. In worst conditions this can be reduced by upto 50% Should you require further assistance please contact R. F. Solutions Ltd., Unit 21, Cliffe Industrial Estate, South Street, Lewes, E Sussex, BN8 6JL, England Tel +44 (0)1273 898 000 Fax +44 (0)1273 480 661 Email sales@rfsolutions.co.uk http://www.rfsolutions.co.uk R F Solutions is a member of the Low Power Radio Association. All Trademarks acknowledged and remain the property of the respected owners. Information contained in this document is believed to be accurate, however no representation or warranty is given and R.F. Solutions Ltd. assumes no liability with respect to the accuracy of such information. Use of R.F.Solutions as critical components in life support systems is not authorised except with express written approval from R.F.Solutions Ltd. DS103_3 Jan ‘01 ©2001 Reg. No. 227 4001, ENGLAND Page 4