F-3504G

12 or 16 kHz Tax Pulse Filter Electrical Specifications at 25O C P/N F-3501 Section (Pins) Inductance +5% (mH) D.C. Resistance Max. (Ω) Attenuates 12 or 16 kHz signals to telco equipment by more than 25 dB. Use two F-3501 inductors, one in a parallel LC configuration followed by one in a series configuration, to provide more than 40 dB attenuation of tax pulse signals. D.C. Current Max. (mA) Dielectric Min. (VAC) Attenuates 12kHz or 16 kHz L1 (1-2) L2 (1-6) L3 (1-5) L4 (1-4) 1.44 2.58 4.52 7.96 2.30 3.25 6.35 10.7 90 70 90 70 1250 1250 1250 1250 16 kHz, Parallel L1 with C=68 nF 12 kHz, Parallel L2 with C=68 nF 16 kHz, Series L3 with C=22 nF 12 kHz, Series L4 with C=22 nF 1. Tested at 10KHz and 100 mVRMS 1 L1 2 6 5 4 Schematic Diagram for P/N F-3501 L2 L3 L4 } Optional use as Dual P/N F-3501 Thru-hole Package .465 (11.81) MAX. .375 (9.53) MAX. .370 (9.40) MAX. P/N F-3501G Surface Mount Package .375 (9.53) MAX. .394 (10.00) MAX. .375 (9.53) MAX. .025 (0.64) .34 (8.6) .098 (2.50) .028 (0.70) .505 (12.83) .490 (12.45) .110 (2.79) MIN. .098 (2.49) .080 (2.03) .024 (0.61) 4 .039 (0.99) .525 (13.34) 6 5 Bottom View 1 2 3 Surface Mount version Available on Tape & Reel 6 5 4 1 Suggested Pad Layout .100 (2.54) TYP. .050 (1.27) TYP. 2 3 .075 (1.905) TYP. Specifications subject to change without notice. For other values & Custom Designs, contact factory. TAXFILT2 - 10/98 Rhombus Industries Inc. 20 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971 12 or 16 kHz Tax Pulse Filter Electrical Specifications at 25O C P/N F-3504 Section (Pins) Inductance +5% (mH) D.C. Resistance Max. (Ω) Attenuates 12 or 16 kHz signals to telco equipment by more than 25 dB. Use two F-3504 inductors, one in a parallel LC configuration followed by one in a series configuration, to provide more than 40 dB attenuation of tax pulse signals. D.C. Current Max. (mA) Dielectric Min. (VAC) Attenuates 12kHz or 16 kHz L1 (1-3) L2 (1-10) L3 (1-8) L4 (1-6) 1.44 2.58 4.52 7.96 2.30 3.25 6.35 10.7 90 70 90 70 1250 1250 1250 1250 16 kHz, Parallel L1 with C=68 nF 12 kHz, Parallel L2 with C=68 nF 16 kHz, Series L3 with C=22 nF 12 kHz, Series L4 with C=22 nF 1. Tested at 10KHz and 100 mVRMS .590 (15.19) .590 (15.19) .307 (7.80) .120 (3.05) MIN. .540 (13.75) } Schematic Diagram P/N F-3504 L2 L3 L4 Optional use as Dual .147 (3.75) TYP. Bottom View 1 2 3 4 1 L1 3 10 8 6 Pin Diameter is 0.024 (0.6) P/N F-3504 EFD-15 Thru-hole Package 8 7 6 5 .876 (22.25) 1 2 10 3 6 4 5 EFD-15 SMD Suggested Pad Layout 10 9 8 7 .098 (2.5) TYP. .045 (1.14) TYP. Physical Dimensions in Inches (mm) 10 .088 (2.24) TYP. 6 1 5 P/N F-3504G EFD-15 Surface Mount Package 1 6 P/N F-3504GCP EFD-15 Surface Mount with Pick-&-Place Cap 5 .685 (17.4) MAX. .335 (8.50) MAX. .016 (0.4) .700 (17.8) MAX. .620 (15.75) MAX. .330 (8.38) MAX. .016 (0.4) .620 (15.75) MAX. .709 (18.0) .028 (0.7) .098 (2.5) .850 (21.6) .028 (0.7) .098 (2.5) .709 (18.0) .850 (21.6) TAXFILT2 - 10/98 Specifications subject to change without notice. For other values & Custom Designs, contact factory. Rhombus Industries Inc. 21 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971