FAI4D-15J

FAST / TTL Logic Triple & Quad Delays 14-Pin DIP & SMD Part Number Description 14-Pin Logic Buffered Multi-Line Delays: FAI3D, FAI4D Delay Per Line in nanoseconds (ns) Lead Style: Blank = Auto-Insertable DIP G = “Gull Wing” Surface Mount J = “J” Bend Surface Mount Examples: FAI4D-20 = 20ns Quadruple 74F Buffered, DIP FAI3D-5G = 5ns Triple 74F Buffered, G-SMD FAIXD - X XX X GENERAL: For Operating Specifications and Test Conditions, see Tables I and VI on page 5 of this catalog. Delays specified for the Leading Edge. Minimum Input Pulse Width ...................................... 100% of total delay Operating Temp. Range .................................................... 0OC to +70OC Temperature Coefficient ............................................ 800ppm/OC typical Supply Current, ICC : FAI3D ............................ 45 mA typ., 95 mA max. FAI4D .......................... 65 mA typ., 130 mA max. Electrical Specifications at 25OC FAST Buffered Multi-Line Delay (ns) Triple P/N Quadruple P/N Quad 14-Pin Schematic Vcc 14 13 OUT1 12 11 OUT 2 OUT 3 OUT 4 10 9 8 Vcc 14 Triple 14-Pin Schematic OUT 1 12 OUT 2 10 OUT 3 8 1 IN 1 2 3 IN 2 4 IN 3 5 IN 4 6 7 GND 1 IN 1 3 IN 2 5 IN 3 7 GND 4 ± 1.00 5 ± 1.00 6 ± 1.00 7 ± 1.00 8 ± 1.00 10 ± 1.50 15 ± 2.00 16 ± 2.00 20 ± 2.00 25 ± 2.00 30 ± 2.00 50 ± 2.50 FAI3D-4 FAI3D-5 FAI3D-6 FAI3D-7 FAI3D-8 FAI3D-10 FAI3D-15 FAI3D-16 FAI3D-20 FAI3D-25 FAI3D-30 FAI3D-50 FAI4D-4 FAI4D-5 FAI4D-6 FAI4D-7 FAI4D-8 FAI4D-10 FAI4D-15 FAI4D-16 FAI4D-20 FAI4D-25 FAI4D-30 FAI4D-50 Dimensions in Inches (mm) .785 (19.94) MAX. .285 (7.24) MAX. .250 .020 (6.35) (0.51) MAX. .120 (3.05) MIN. .050 (1.27) TYP. .785 (19.94) MAX. DIP (Default, FAI4D-XX) .008 R (0.20) .010 (0.25) TYP. DIP (Default, FAI3D-XX) .250 .020 (6.35) (0.51) MAX. .120 (3.05) MIN. .300 (7.62) .365 (9.27) MAX. .020 (0.51) TYP. .100 (2.54) TYP. .020 (0.51) TYP. .050 (1.27) TYP. .200 (5.08) TYP. .785 (19.94) MAX. .285 (7.24) MAX. .250 (6.35) MAX. .015 (0.38) TYP. .030 (0.76) TYP. .785 (19.94) MAX. G-SMD (FAI4D-XXG) .008 R (0.20) .010 (0.25) TYP. .430 (10.92) .400 (10.16) G-SMD (FAI3D-XXG) .250 (6.35) MAX. .015 (0.38) TYP. .020 (0.51) TYP. .050 (1.27) TYP. .100 (2.54) TYP. .020 (0.51) TYP. .050 (1.27) TYP. .200 (5.08) TYP. .785 (19.94) MAX. .285 (7.24) MAX. .265 (6.73) MAX. .030 (0.76) TYP. .285 (7.24) .260 (6.60) .330 (8.38) MAX. .020 R (0.51) .785 (19.94) MAX. J-SMD (FAI4D-XXJ) J-SMD (FAI3D-XXJ) .265 (6.73) MAX. .030 (0.76) TYP. .020 (0.51) TYP. .050 (1.27) TYP. .100 (2.54) TYP. .020 (0.51) TYP. .050 (1.27) TYP. .200 (5.08) TYP. Specifications subject to change without notice. For other values & Custom Designs, contact factory. 21 FAI34D 1/98 Rhombus Industries Inc. 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971