L-14725

POWER INDUCTORS Sendust Material (AL & Si Fe) Well Suited for Switch Mode Power Supplies and Regulator Applications. Varnish Finish Optional by adding a "V" suffix to the part number . Loss @50kHz 5657 Core Loss @100kHz 16000 Core Loss @300kHz 83138 Core Core Loss in mW/cm3 @4000Gauss Core Loss Data is provided for comparison with other listed inductor materials and is for reference only. Electrical Specifications at 25OC Part Number L (1) (µH) Typ. 108.4 IDC (2) 20% Amps 6.50 IDC(3) 50% Amps 14.62 I (4) max. Amps 9.70 DCR Max (mΩ) 45 Lead Size AWG 17 L-14725 1) Typical Inductance with no DC. Tolerance of +10% 2) Current which will produce a 20% reduction in L. 3) Current which will produce a 50% reduction in L. 4) Maximum DC current. This value is for a 40oC temperature rise due to copper loss. with AC flux density kept to 10 gauss or less. (This typically represents a current ripple of less than 1%). .510 (12.95) Typ.. Physical Dimensions inches (mm) Schematic Diagram 1.520 (36.60) Typ. *0.375 (9.53) .520 (13.20) Typ. *+0.125/-0.025 Lead diameter : 0.0483 RHOMBUS P/N: L-14725 CUST P/N: DATE: 2/14/00 NAME: SHEET: 1 OF 1 Rhombus Industries Inc. Transformers & Magnetic Products 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com