L-14733

Core Core Core Loss Loss Loss Although higher in core loss than MPP material, Sendust has approxi@300kHz mately 50% more energy storage capacity. Sendust has approximately 2/3 @50kHz @100kHz 5657 16000 83138 the flux density of High Flux material, but has a much lower core loss. 3 Sendust is an ideal tradeoff between storage capacity, core loss and cost. Core Loss in mW/cm @4000 Gauss L (2) typ. (µH) 39.5 23.4 12.6 68.0 40.4 23.1 199.1 119.5 69.7 40.4 31.0 585.2 352.8 210.7 123.2 93.6 609.7 377.8 232.1 179.5 133.6 395.1 236.6 188.4 145.7 108.4 741.3 567.6 448.4 343.3 264.4 598.0 468.4 365.3 284.4 221.9 604.0 462.5 371.4 280.8 219.1 IDC (3) 20% Amps 2.20 2.85 3.89 2.07 2.68 3.55 2.28 2.95 3.86 5.06 5.79 2.38 3.06 3.96 5.18 5.94 2.76 3.51 4.47 5.09 5.90 3.40 4.40 4.93 5.60 6.50 4.75 5.43 6.10 6.98 7.95 4.66 5.26 5.96 6.75 7.65 5.17 5.91 6.60 7.59 8.59 IDC (4) 50% Amps 4.94 6.42 8.76 4.66 6.04 7.98 5.13 6.63 8.68 11.39 13.02 5.35 6.89 8.92 11.66 13.38 6.21 7.89 10.06 11.45 13.27 7.66 9.89 11.09 12.61 14.62 10.68 12.21 13.74 15.70 17.89 10.48 11.84 13.41 15.20 17.20 11.64 13.30 14.84 17.07 19.32 Lead Size AWG 28 26 24 28 26 24 26 24 22 20 19 26 24 22 20 19 24 22 20 19 18 22 20 19 18 17 20 19 18 17 16 19 18 17 16 15 18 17 16 15 14 I (5) max. Amps 1.38 1.97 2.81 1.38 1.97 2.81 1.97 2.81 4.00 5.70 6.81 1.97 2.81 4.00 5.70 6.81 2.81 4.00 5.70 6.81 8.11 4.00 5.70 6.81 8.11 9.70 5.70 6.81 8.11 9.70 11.60 6.81 8.11 9.70 11.60 13.80 8.11 9.70 11.60 13.80 16.60 DCR nom. (mΩ) 183 89 41 255 124 59 351 170 82 39 27 598 290 142 68 47 469 232 114 80 55 277 134 95 66 45 207 144 102 70 49 196 137 96 67 47 172 119 85 58 41 Size Code 1 1 1 2 2 2 3 3 3 3 3 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6 7 7 7 7 7 8 8 8 8 8 9 9 9 9 9 POWER INDUCTORS SENDUST MATERIAL ( Al & Si & Fe ) Part Number L-14700 L-14701 L-14702 L-14703 L-14704 L-14705 L-14706 L-14707 L-14708 L-14709 L-14710 L-14711 L-14712 L-14713 L-14714 L-14715 L-14716 L-14717 L-14718 L-14719 L-14720 L-14721 L-14722 L-14723 L-14724 L-14725 L-14726 L-14727 L-14728 L-14729 L-14730 L-14731 L-14732 L-14733 L-14734 L-14735 L-14736 L-14737 L-14738 L-14739 L-14740 (1) Core Loss Data is provided for comparison with other listed inductor materials and is for reference only. (K) Well Suited for Switch Mode Power Supplies and Regulator Applications. For Bare Coil Dimensions Refer to Drawing and Dimensions from Page 6 Single Layer Wound Leads are Pre-Tinned Custom Versions Available Vertical Base Mounting Available Shrink Tubing Optional Varnish Finish Optional Semi-Encapsulated Versions or Clip Mount Package Style Available for some models Clip Mount Package (1) (K) (K) (K) (K) (K) (K) (K) A 0.130" D C B F 1) Selected Parts available in Clip Mount Style. Example: L-14702K 2) Typical Inductance with no DC. Tolerance of +10%. See Specific data sheets for test conditions. 3) Current which will produce a 20% reduction in L 4) Current which will produce a 50% reduction in L 5) Maximum DC current. This value is for a 40 C temperature rise due to copper loss, with AC flux density kept to 10 Gauss or less. (This typically represents a current ripple of less than 1%) O Clip Mount Package Size Chart (1) Size Code 1 2 3 4 A Typical Dimensions in Inches B C D 0.340 0.450 0.600 0.700 0.580 0.650 0.948 1.250 0.290 0.325 0.475 0.625 F 0.220 0.300 0.450 0.500 0.600 0.650 0.950 1.250 Specifications are subject to change without notice SML-SD - 10/02 Rhombus Industries Inc. Transformers & Magnetic Products 7 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 z FAX: (714) 896-0971