L-21207

Surface Mount Inductor Toroid Mount meets UL94VO Schematic Diagram 1 : 1 +1% Designed for IR and Vapor Phase Reflow The Inductor is a dual winding and can be used as a dual inductor, single inductor, or a transformer. Single inductors can be wired in series for high inductance values or wired in parallel for less inductance but twice the current capacity. As a 1:1 transformer, it can provide a minimum of 500 volts isolation with good frequency response. For series operation Connect 2 & 4 For parallel operation Connect 1 & 4 and 2 & 3 Electrical Specifications at 25o C --------------- Series Ratings ------------------L DCR I L E-T + 20% Max. Max. with DC Product ( µH ) ( mΩ ) ADC ( µH ) ( V-µs ) ---- ------------ Parallel Ratings ----------------L DCR I L E-T + 20% Max. Max. with DC Product ( µH ) ( mΩ ) ADC ( µH ) ( V-µs ) 62.8 181 1.56 56.2 39.46 15.7 45.3 3.12 14.1 19.73 Physical Dimensions in inches (mm) 0.500 (12.70) Max. Suggested Pad Layout 0.330 (8.38) .060 (1.52) 0.500 (12.70) Max. 2 3 1 4 0.175 (4.45) 0.410 (10.41) 0.215 (5.46) MAX 0.330 (8.38) 0.410 (10.41) RHOMBUS P/N: L-21207 CUST P/N: DATE: 10/30/00 NAME: SHEET: 1 OF 1 Rhombus Industries Inc. Transformers & Magnetic Products 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971 www.rhombus-ind.com