L-45071

HIGH FREQUENCY COMMON MODE CHOKES Low Cost Encapsulated Package Toroidal Construction Isolation 1500 VRMS Minimum Electrical Specifications(1) at 25OC Thru Surface L (2) Hole Mount Min. P/N P/N ( µH ) NEW! Materials used in the construction of these parts are UL 94 VO and are rated at 130o C or better Surface Mount parts available in Tape & Reel DCR Max. (Ω) LL Max. ( µH ) Cw/w Max. ( pF ) SRF Typ. ( MHz ) L-45001 L-45002 L-45003 L-45004 L-45005 L-45006 L-45007 L-45008 L-45009 L-45010 L-45011 L-45012 L-45051 L-45052 L-45053 L-45054 L-45055 L-45056 L-45057 L-45058 L-45059 L-45060 L-45061 L-45062 10000 7000 5000 2500 1500 1000 750 500 250 100 500 25 1.6 1.4 1.2 1.0 0.9 0.8 0.7 0.6 0.8 0.7 0.6 0.5 40 35 30 25 12 11 10 9 10 8 6 4 11 10 9 8 8 7 6 5 6 5 4 3 0.98 1.25 1.80 2.70 4.10 5.20 6.60 7.70 >13 >13 >13 >13 6-Pin Schematic Unused Pins omitted for thru hole versions. All 6 Pins provided on surface mount versions 1. I MAX is 32 mA for all parts @ 500 cm/A 2. Tested @ 10KHz & 100mV Package Physical Dimensions in Inches (mm) "T6" - Unused Pins Removed "G6-Wide" Specifications are subject to change without notice FILTER - 5/97 Rhombus Industries Inc. Transformers & Magnetic Products 26 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 l FAX: (714) 896-0971 HIGH FREQUENCY COMMON MODE CHOKES Low Cost Encapsulated Package Toroidal Construction Isolation 1500 VRMS Minimum Electrical Specifications(1) at 25OC Thru Surface L (2) Hole Mount Min. P/N P/N ( µH ) NEW! Materials used in the construction of these parts are UL 94 VO and are rated at 130o C or better Surface Mount parts available in Tape & Reel DCR Max. (Ω) LL Max. ( µH ) Cw/w Max. ( pF ) SRF Typ. ( MHz ) 10-Pin Schematic L-45013 L-45014 L-45015 L-45016 L-45017 L-45018 L-45019 L-45020 L-45021 L-45022 L-45023 L-45024 L-45063 L-45064 L-45065 L-45066 L-45067 L-45068 L-45069 L-45070 L-45071 L-45072 L-45073 L-45074 20000 15000 10000 5000 2500 1500 1000 750 500 250 100 50 2.5 2.2 2.0 1.5 1.3 1.0 0.8 0.6 1.0 0.8 0.6 0.4 100 75 65 50 40 35 30 25 35 25 20 10 30 25 20 15 13 11 8 5 12 8 6 4 0.4 0.5 0.7 1.2 2.0 2.7 3.2 3.5 3.8 6.1 9.8 >13 Unused Pins omitted for thru hole versions. All 10 Pins provided on surface mount versions 1. I MAX is 32 mA for all parts @ 500 cm/A 2. Tested @ 10KHz & 100mV 1 2 10 9 8 7 6 10 Pin Surface Mount Package 3 4 5 10-Pin DIP Specifications are subject to change without notice FILTER - 5/97 Rhombus Industries Inc. Transformers & Magnetic Products 27 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 l FAX: (714) 896-0971