SL4-6-50

SL4 Series Single-In-Line Passive Single Output 50 Ω Impedance Delays SL4 Schematic Diagram Electrical Specifications at 25OC 1, 2, 3 Delay (ns) Rise Time 10% - 90% max. (ns) DCR max. (Ohms) 7-Pin SIP Style Single 55 Ohm P/N 1.0 ± 0.2 1.5 ± 0.3 2.0 ± 0.5 2.5 ± 0.6 3.0 ± 0.6 3.5 ± 0.7 4.0 ± 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.6 1.7 1.8 1.9 2.0 2.2 2.4 2.8 3.0 3.0 3.3 4.0 5.0 9.0 10.5 12.5 15.0 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.8 0.8 0.9 0.9 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.6 1.7 1.7 1.7 1.8 1.8 1.8 SL 4 - 1 - 50 SL 4 - 1P5 - 50 SL 4 - 2 - 50 SL 4 - 2P5 - 50 SL 4 - 3 - 50 SL 4 - 3P5 - 50 SL 4 - 4 - 50 SL 4 - 4P5 - 50 SL 4 - 5 - 50 SL 4 - 6 - 50 SL 4 - 7 - 50 SL 4 - 7P5 - 50 SL 4 - 8 - 50 SL 4 - 9 - 50 SL 4 - 10 - 50 SL 4 - 11 - 50 SL 4 - 12 - 50 SL 4 - 13 - 50 SL 4 - 14 - 50 SL 4 - 15 - 50 SL 4 - 16 - 50 SL 4 - 20 - 50 SL 4 - 25 - 50 SL 4 - 30 - 50 SL 4 - 35 - 50 SL 4 - 40 - 50 SL 4 - 50 - 50 1 COM 2 IN 6 7 4.5 ± 0.8 5.0 ± 1.0 6.0 ± 1.0 7.0 ± 1.0 7.5 ± 1.0 8.0 ± 1.0 9.0 ± 1.0 10 ± 1.0 11 ± 1.0 12 ± 1.0 13 ± 1.0 14 ± 1.0 15 ± 1.0 16 ± 1.0 20 ± 1.0 25 ± 1.3 30 ± 1.5 35 ± 1.8 40 ± 2.0 50 ± 2.5 100% COM OPERATING SPECIFICATIONS Pulse Overshoot (Pos) .......................................... 5% to 10%, typical Pulse Distortion (S) ........................................................... 3% typical Attenuation ............................................................. 0.5 dB maximum Working Voltage ................................................... 25 VDC maximum Dielectric Strength ................................................ 100VDC minimum Insulation Resistance ..................... 1,000 Megohms min. @ 100VDC Temperature Coefficient ....................................... 70 ppm/OC, typical Band Width (fC) ............................................................ .35/tr approx. Operating Temperature Range ................................... -55O to +125OC Storage Temperature Range ................................... -65O to +150OC TEST CONDITIONS (Measurements made at 25OC) Input Rise Time ............................................................... 2.0 ns max. Input Pulse Period .................................................................. 500 ns Input Pulse Width .................................................................. 1000 ns ENVIRONMENTAL All units are designed to meet the applicable portions of MIL-D-23859, MIL-D-83531 and are capable of meeting the environmental requirements of MIL-STD-202 for moisture resistance, vibration shock, humidity and life. 1. Delays measured at 50% Level on the Leading Edge 2. Impedance, Z0 , 50 Ohms + 10 % 3. Output terminated to ground through RL = Z0 .800 (20.32) MAX. .275 (6.99) MAX. .030 (0.76) TYP. .020 (0.51) TYP. .400 (10.16) .100 (2.54) TYP. .120 (3.05) MIN. .200 (5.08) MAX. Physical Dimensions inches (mm) .010 (0.25) TYP. . RHOMBUS P/N: CUST P/N: DATE: 01/09/98 50 Ohm SL4 Series NAME: SHEET: 1 OF 1 R hombus Industries Inc. Transformers & Magnetic Products www.rhombus-ind.com 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971