T-16211

New! T1 / CEPT / ISDN-PRI SMD 40 Pin Quad Modules 4 Transformers Per Part Electrical Specifications Part Number T-16200 T-16201 T-16202 T-16203 T-16204 T-16205 T-16206 T-16207 T-16208 T-16209 T-16210 T-16211 T-16212 T-16213 T-16214 T-16215 T-16216 T-16217 at 25o C Turns Ratio + 5% 1, 2 For T1/CEPT/PRI Telecom Applications Designed to meet CCITT and FCC Requirements 1500 VRMS Minimum Isolation OCL Min. ( mH ) 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 CW/W max. ( pF ) 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 LL max. ( µH ) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.4 / 0.5 0.6 0.6 0.6 0.6 0.6 0.6 DCR Pri. max. (Ω) 0.7 0.8 0.8 0.8 0.8 0.7 0.8 0.7 0.8 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.7 / 1.0 DCR Sec. max. (Ω) 0.9 1.8 0.8 / 1.8 0.8 / 1.8 0.8 1.4 1.8 / 0.8 0.9 1.8 / 0.8 0.9 1.0 1.0 0.8 / 1.8 0.8 / 1.8 1.8 1.8 1.8 1.0 / 0.7 Schem. Style "3" "3" "2" "1" "3" "8" "2" "6" "7" "3" "1" "1" "5" "1" "4" "5" "3" "3" 1:1.36CT & 1:2CT 1:2CT & 1:2CT 1:1:1.26 & 1:2CT 1:1.15 & 1:2CT 1:1CT & 1:1CT 1CT:2CT & 1CT:2CT 1:2CT & 1:1CT 1CT:2CT & 1:1 1:2CT & 1:1.36 1:1.14CT & 1:2CT 1:1.36 & 1:2CT 1:1.36 & 1:1.36CT 1:1.15 & 1:1.15 1:1.14 & 1:1.14CT 1:2 & 1:2CT 1:2 & 1:2 1CT:1.41 & 1CT:1.41 1:2CT & 1CT:2 P/N T-16200 T-16201 T-16202 T-16203 T-16204 T-16205 T-16206 T-16207 T-16208 T-16209 T-16210 T-16211 T-16212 T-16213 T-16214 T-16215 T-16216 T-16217 Primary Pins 28-30, 38-40 / 6-8, 16-18 6-8, 16-18 / 28-30, 38-40 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 6-8, 16-18 / 28-30, 38-40 6-8, 16-18 / 28-30, 38-40 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 28-30, 38-40 / 6-8, 16-18 28-30, 38-40 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 1-3, 16-18 / 28-30, 33-35 1-3, 11-13 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 6-8, 16-18 / 1-3, 11-13 OCL Tested at 100kHz 50mV Flammability: Materials used in the production of these units meet requirements of UL94-VO and IEC 695-2-2 needle flame test. Dual Port design Parts shipped in anti-static tubes. Custom Designs Available Other Configurations and Packages Available See Our Web Page Under Data Communications/T1 Tape & Reel Available Specifications subject to change without notice. For other values & Custom Designs, contact factory. T1-DP40 Rhombus Industries Inc. www.rhombus-ind.com 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971 40-Pin 50 mil SMD Package Physical Dimensions in inches (mm) 1.120 (28.45) M AX. .485 (12.32) M AX. .230 (5.84) M AX. .016 (0.41) TYP. .050 (1.27) TYP. .010 (0.25) TYP. .045 (1.14) TYP. .010 (0.25) TYP. .640 (16.26) .620 (15.75) Schematic Style "1" 40 38 35 33 30 28 25 23 Schematic Style "2" 40 39 38 35 33 30 29 28 25 23 1 3 6 7 8 11 13 16 17 18 1 3 6 7 8 11 13 16 17 18 Schematic Style "3" 40 38 35 34 33 30 28 25 24 23 40 38 Schematic Style "4" 35 33 30 28 25 23 1 2 3 6 8 11 12 13 16 18 1 3 6 7 8 11 12 13 16 18 Schematic Style "5" 40 38 35 33 30 28 25 23 40 37 38 Schematic Style "6" 35 34 33 30 29 28 25 24 23 1 3 6 8 11 13 16 18 1 2 3 6 7 8 11 12 13 16 17 18 Schematic Style "7" 40 38 35 33 30 28 25 23 40 39 38 Schematic Style "8" 35 33 30 29 28 25 23 1 2 3 6 8 11 12 13 16 18 1 23 6 8 11 12 13 16 18 Specifications subject to change without notice. For other values & Custom Designs, contact factory. T1-DP40 Rhombus Industries Inc. www.rhombus-ind.com 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971