CHR-HT2512

SRT Resistor Technology High Temperature Chip Resistors Type: CHR-HT, CHS-HT, CHM-HT Sizes: 0603, 0805, 1206, 1210, 2010, 2512, 4020 The SRT chip resistor series CHR, CHS und CHM with the extensipn –HT are available for the working temperature range up to 300°C. Features: • • • • • • High temperature applications up to 300°C Chip resistors in thick film technology PtAg-terminals Suitable for conductive epoxy applications and soldering Suitable for high vacuum applicatons – no organics Non-magnetic Draft NEW Dimensions / Technical data: Dimensions and data are conform with the data of the basic series CHR, CHS and CHM (shown in the particular data sheets). Speciality: • • • • • TCR is valid for the temperature range +25°C …+125°C The final measuring of the resistors takes place at room temperature (independent of TCR) Please pay attention to the interconnection technology at high temperature applications. Temperature range: Climatic category acc. to EN 60068-1 -55°C ... +300°C 55/300/56 Packaging: Bulk in plastic bags – minimum quantity 100 pieces per value Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value Reel diameter 180 mm or 330 mm Ordering Data: Type – HT – value – tolerance – TCR – packaging Example: CHR-HT 0805 100K ±10% TCR250 Tape 180 mm Not trimmed parts are indicated by the extension “NA” in the order code: Type – HT – value – tolerance – NA – TCR - packaging Example: CHS-HT 4020 10G ±10% NA TCR250 Tape 180 mm If no requirements for TCR and taping are given, the highest value in table will be supplied and packaging is bulk. Issue 06-2008 www.rhopointcomponents.com sales@rhopointcomponents.com