CHS1206

SRT Resistor Technology High-Value Chip Resistors Type: CHS Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020 Features: • • • • • • • High Value Chip Resistors in Thickfilm Low temperature and voltage dependency Untrimmed for higher Working Voltage up to 6000 V Suitable for high vacuum applicatons – no organics Contact areas PtAg for soldering and conductive glueing High temperature application possible (up to 300°C) non-magnetic Dimensions: Size 0402 0603 0805 1206 1210 2512 4020 L 1.04 ±0.05 1.50 +0.15/-0.05 2.00 +0.15/-0.05 3.20 +0.15/-0.05 3.20 +0.15/-0.05 6.30 +0.15/-0.05 10.20 +0.15/-0.05 B 0.50 ±0.05 0.80 +0.15/-0.05 1.25 +0.15/-0.05 1.50 +0.2/-0.05 2.50 +0.2/-0.05 3.50 +0.2/-0.05 5.10 +0.2/-0.05 D 0.30 +0.15/-0.05 C 0.1 +0.1/-0.05 0.2 +0.2/-0.1 0.3 +0.2/-0.1 0.3 +0.2/-0.1 0.8 ±0.2 0.9 ±0.2 0.9 ±0.2 C L D B 0.40 +0.15/-0.05 0.40 +0.15/-0.05 0.40 +0.15/-0.05 0.50 +0.15/-0.05 0.60 +0.15/-0.05 0.60 +0.15/-0.05 L = Length, B = Width, D = Thickness, C = Width of wrap around (in mm) Packaging: Bulk in plastic bags – minimum quantity 100 pieces per value Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value Reel diameter 180 mm or 330 mm Ordering Data: Type – value – tolerance – TCR – packaging Example: CHS 4020 10G ±10% TCR 100 Tape 180 mm Untrimmed parts are indicated by the extension “NA” in the order code: Type – value – tolerance – NA – TCR - packaging Example: CHS 4020 10G ±10% NA TCR 100 Tape 180 mm If no requirements for TCR and taping are given, the standard value (highest value in table) will be supplied and packaging is bulk. Standard measuring voltage is 10V, required different voltages are to specify explicitly. Issue 07-2008 SRT Resistor Technology GmbH Ostlandstr. 31 D-90556 Cadolzburg Germany Fon: Fax: E-mail: Internet: +49 (0)9103 / 7952-0 +49 (0)9103 / 5128 info@srt-restech.de www.srt-restech.de SRT Resistor Technology High-Value Chip Resistors Type: CHS Sizes: 0402, 0603, 0805, 1206, 1210, 2512, 4020 Technical data – depending on size: Size Power rating P70 (mW) (P155 = 0 mW) Max. Working Voltage U_, Ueff (V) trimmed untrimmed (Tol. > 5%) 0402 50 0603 100 0805 125 1206 250 1210 350 2512 1000 1) 4020 1500 1) 30 100 75 220 100 300 200 600 300 900 1000 2000 4000 6000 Ranges/Tolerances/ TCR2)/VCR 10M – 100M 5/10/20% TC50/100