K3X13AX

Temperature Sensors Sensor to Computer Interface Modules The DGH analogue sensor to computer interface modules are ideal interfaces for some of Rhopoint’s temperature sensors. They are complete hardware solutions for data acquistion systems based on PCs. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning functions. The modules operate on a single power supply input from 10V to 30V. They provide a 15bit measurement A/D connector and discrete digital I/O bits for controlling solid state relays or sensing contact closures. The number of digital inputs and outputs varies depending on module type. The module performs A/D conversion and linearization of sensor input data. The module transmits data values in ASCII format to any host computer with a standard RS-232 port. Modules are delivered with a comprehensive user manual and setup software, and can be daisy chained. T Type Thermocouple Input Module D1331 Prices: 1-9pcs £277.00 Order Code K3X13HQ 10+ £264.00 Order Code K3X13LT E Type Thermocouple Input Module D1341 Prices: 1-9pcs £277.00 10+ £264.00 Thermocouple Input Modules D1300 Series The D1300 thermocouple modules convert and linearize thermocouple signals to engineering units scaled in degrees C or F. Values are communicated to host computers using a RS-232 link. • Overall accuracy (error from all sources) from 0 to +40°C ambient: +/-1deg C max Thermistor Input Modules D1451 Series The D1451 thermistor input module converts thermistor signals to digital information linearizes the data and outputs it in engineering units scaled in either C or F. • • • • • • • • • Resolution: 1 degree (C or F) Common mode rejection: 100db at 50/60 Hz User selectable degrees C or F scaling Lead resistance effect: