1342664

CUTOUT DETAILS MAX PANEL THICKNESS 2.8mm 0.738 18.75 0.492 12.5 SCALE 2:1 0.315 8 0.24 6 Condition of Sale can be found on our website: essentra.com. Essentra Components does not warrant that the files will be error free and may create new versions ("Upgrades") at any time, which may correct such errors. Essentra Components has no obligation to notify you of such upgrades. Any upgraded file will be published to the website, when it becomes available. You are not permitted to load any of the files on to a network server for the purposes of distribution to one or more other computer(s) on that network or to effect such distribution. Essentra Components shall not be liable for any loss or damage whatsoever or however caused, arising directly or indirectly from the use of the files. 0.787 20 0.39 10 © 2013 Essentra Components. All rights reserved. Registered in England, Company No. 547495. Registered Office: Avebury House, 201-249 Avebury Boulevard, Milton Keynes, MK9 1AU UNLESS OTHERWISE STATED ALL DIMENSIONS IN mm LINEAR TOLERANCE SCALE 1 : 1 0.89 22.5 0.11 2.9 NOTES: 1) TEMPERATURE RESISTANCE: 180 C 2) PART IS DIMENSIONED IN INSTALLATION STATE SIZE 0-10mm 10-30mm 30-50mm 50-100mm 100-200mm 200-300mm 300-500mm +500mm ORG. SCALE: MATERIAL: Part ID: TITLE: APPROVED - UNCONTROLLED (0) (0.0) ±0.5 ±0.15 ±0.5 ±0.20 ±0.5 ±0.30 ±0.8 ±0.50 ±1.5 ±0.80 ±2.0 ±1.20 ±3.0 ±2.00 ±5.0 ±3.00 (0.00) ±0.10 ±0.15 ±0.20 ±0.25 ±0.40 ±0.80 ±1.00 ±1.50 DO NOT SCALE THIRD ANGLE PROJECTION ANGULAR TOLERANCE ±0.5 DEGREES UNSPECIFIED RADII 0.25mm DRAFT ANGLE 0.5 DEGREES DIMENSIONS IN BRACKETS [ ] ARE IN INCHES FOR REFERENCE ONLY CREATE DATE:- 2:1 08/01/2018 SILICONE RUBBER 1342664 Project: P110580-1 CABLE GROMMET SHEET DWG. No. 1342664 1 of 1 ISSUE 1