BPE-RJ45-01

A B C D E F PART No. "A" "B" 12.8 [.50] 25.8 [1.02] 14.7 [.58] "C" "D" "E" "L1" 13 [.512] "L2" PANEL THICKNESS FIG REV. 01 02 03 MODIFICATION. C0-2010730 C0-2010780 C0-2010881 DATE 15/07/09 25/08/09 05/02/10 DRN OW OW OW 1 21.5 +0.6 -0 BPE-SC-1-01 [.85 +.024 -0] 1 BPE-SC-2-01 BPE-SC-3-01 BPE-RJ45-01 16 [.63] 34.7 [1.37] 17.7 [.70] 12 [.47] 9.3 [.37] 1.5 [.059] 9.5 [.374] 1.4 - 3.5 [.550 - .138] FIG 1: 26 [1.024] 19.3-20 [.760-.787] 14.9-15 [.587-.591] 13.5 [.532] 7.9 [.311] 0.75[.030], 1.2[.050], 1.6[.060], 2.7 [.110], 3.5 [.140] 0.75[.030], 1.2[.050], 1.6[.060], 2.7 [.110], 3.75 [.148] 1.4 - 3.5 [.055 - .138] 2 1 22 [.87] 19.1 [.75] BPE-LC-D-01 BPE-ST-1-01 2 15 [.59] Ø12 [.47] 13.2 [.52] Ø9.2 [.36] 15 [.59] Ø12 [.47] 13.2 [.52] 7.7 [.30] 2 [.078] 13.5 [.532] 1.5 [.059] Ø9.4 [.370] "A" "C" "E" +0.020 "L1" 0.000 +0.50 "L1" 0 +0.020 "L2" 0.000 +0.50 "L2" 0 RECOMMENDED MOUNTING HOLE 2 FIG 2: FIG 1: 9 [.35] "B" 3 "D" NOTES: 1) ALTERNATE UNITS FOR REFERENCE ONLY 2) PARTS AVAILABLE IN GREY AND WHITE BY SPECIAL ORDER ADD GY AND WH TO END OF PART NUMBER 3) PARTS AVAILABLE IN NYLON 6/6 FR UL94 V-0 BY SPECIAL ORDER, REPLACE -01 WITH -19 AT END OF PART NUMBER INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT. 3 "A" "C" ["L2" "L2" "E" .003] 0.08 RICHCO, INC. MATERIAL: WWW.RICHCO-INC.COM FIG 2: 9 [.35] .003] 0.08 ALL DIMENSIONS IN mm GENERAL TOLERANCES 0.25 UNLESS OTHERWISE STATED 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 COLOUR: THIRD ANGLE NYLON 6/6 UL94 V-2 (RMS-01) BLANKING PLUGS BLACK 4 4 "B" "D" DESCRIPTION: DRG No: PART No: ["L1" "L1" RECOMMENDED MOUNTING HOLE SEE TABLE N/A SHEET SIZE DATE SCALE NPR No: 09-071 DRN DATE A4 SHEET No. OW A B C D CHKD 15/07/09 E TC 15/07/09 NTS 1 OF 1 FORM No. 0143/00