HNSM3-12-5.5-1

C B A D REV. H L 01 02 03 04 05 06 07 08 09 10 11 MD1 MD2 1 P1 P2 MODIFICATION. NEW DRAWING ECN 04-219 ECN 05-061 ECN 06-253 ECN 07-089 CO-2010422 CO-2010547 CO-2010940 CO-2010979 CO-2011201 CO-2011253 DATE DRN 22/10/04 09/12/04 11/05/05 24/11/06 25/05/07 03/10/08 18/02/09 10/06/10 31/08/10 27/09/11 12/04/12 NJB NJB OW OW SF OW SF SF SF SF SF 1) ALL LENGTHS ARE AVAILABLE IN 1mm INCREMENTS. 2) PARTS AVAILABLE IN NYLON 6 GF25% V-0 (RMS-205), COLOUR NATURAL (MAY APPEAR BROWN) BY SPECIAL ORDER. TO ORDER ADD "V" TO THE END OF THE PART NUMBER. EXAMPLE: "HNSM2-20-5-1V" FIG 1 2 ALTERNATE UNITS FOR REFERENCE ONLY FIG 2 INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT 3 PART NO. D1=D2 H HNSM2-L-5-1 HNSM2.5-L-5-1 HNSM3-L-5.5-1 HNSM3-L-6-1 HNSM3-L-7-1 HNSM3-L-8-1 HNSM4-L-8-1 HNSM4-L-10-1 HNSM5-L-10-1 HNSM6-L-10-1 M2 M2.5 5[.197] M3 5.5[.22] 6[.24] 7[.276] 8[.32] M4 M5 M6 10[.394] P1=P2 L 5-10[.197-.394] 4-10[.158-.394] 5-10[.197-.394] 5-15[.197-.591] 5-15[.197-.591] 6-15[.237-.591] 5-20[.197-.788] 10-20[.394-.788] 5-20[.197-.788] 10-20[.984-.788] THROUGH FIG 11-45[.433-1.77] 11-55[.433-2.2] 16-65[.630-2.56] 21-68[.827-2.678] 21-60[.827-2.363] 21-65[.827-2.56] 21-60[.827-2.363] 10[.394] MAX WWW.RICHCO-INC.COM MATERIAL: 2 TITLE: 1 2 B C IMPERIAL GENERAL TOLERANCES 0.010 ARE FOR REFERENCE UNLESS OTHERWISE STATED 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 COLOUR: NYLON 6 25% GF (RMS-173) HEXAGONAL THREADED SPACER, NYLON 04-130 D BLACK (SEE NOTE 2) PART No: HTSN-MD-L-H-1 NPR REF: DRG No: DRN 3 METRIC GENERAL TOLERANCES 0.25 ARE PRIMARY UNLESS OTHERWISE STATED 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 RICHCO, INC. 2 2 1 NJB A 1 NOTES: 2 4 F E SIZE A4 N/A DATE 22/10/04 E CHKD RC DATE 23/10/04 SCALE SHEET No NTS 1 OF 1 F FORM No 0145/02 4