LTG-43021

PART NUMBER LTG-199017 LTG-1 LTG-39897 LTG-34715 LTG-34716 LTG-43021 LTG-2 LTG-3 STYLE COLOR PANEL HOLE SIZE 1 BLACK 12.5±0.25 [.49±.01] 12.7±0.2 [.500±.008] 16±0.25 [.63±.01] 19±0.25 [.75±.01] 23±0.25 [.91±.01] 29±0.25 [1.14±.01] 38±0.25 [1.50±.01] 48±0.25 [1.89±.01] 2 GREY PANEL THICKNESS CABLE SIZE DIMENSION "D" REF. 0.5-2 [.02-.08] 3-5 [.12-.20] 20 [.79] 1-4 [.04-.16] 5-7 [.20-.28] 7-10 [.28-.39] 10-14 [.39-.55] 14-20 [.55-.79] 20-24 [.79-.94] 25-32 [.98-1.26] 21 [.83] 24 [.94] 28 [1.10] 33.8 [1.33] 46 [1.81] 57.5 [2.26] "L" A C DIMENSION "L" DIMENSION "H" REF. REF. 17.5 [.69] 7.1 [.28] 12.8 [.50] 6.8 [.27] 18.5 [.73] 6.2 [.24] 19 [.75] 6 [.24] 22.2 [.87] 6.1 [.24] 24.4 [.96] 6.1 [.24] 29 [1.14] 6.5 [.26] 32 [1.26] 8 [.31] "L" "H" "H" "D" "D" SECTION A-A A C STYLE 1 STYLE 2 SECTION C-C CUT CENTER CUT CENTER AS SHOWN AND INSERT CABLE THROUGH GROMMET PRESS GROMMET INTO PANEL NOTES: 1. MATERIAL: EPDM RUBBER, 50 SHORE A (RMS-153). 2. PARTS CONFORM TO IP67 STANDARD. 3. ALTERNATE UNITS FOR REFERENCE ONLY. TITLE: 4. GREY PARTS AVAILABLE IN COLOR BLACK BY SPECIAL ORDER. TO ORDER ADD "BK" CREATED USING FILE #: LTG DWN: R.D.G. SOLIDWORKS TO END OF PART NO. PULL BACK CABLE TO FORM SEAL DWG IN mm [IN] FINAL LIQUID TIGHT GROMMETS K REV. SEE CO 200431 FOR CHANGES SEE ENGINEERING FOR REVISIONS A-J DESCRIPTION SK 09/08/09 ------ENGR. DATE TOLERANCES UNLESS NOTED .XX=±.010 .XXX=±.005 FRAC.=±1/64 ANG.=±1° SHEET: 1 OF 1 RE: SHEET SIZE: A RICHCO, INC. DT: 06/30/03 APP: RDG CHKD: SJ RICHCO, INC. ENG@RICHCO-INC.COM (773) 539-4060 PART # SEE TABLE PRINT TYPE CA