RFG-120-T

C B A D REV. "A" "D" "B" 1 MODIFICATION. 01 02 03 04 "E" "D" "A" F E DRAWING RELEASE CO 2010840 CO2011190 CO2011224 DATE DRN 29/09/09 14/10/09 31/08/11 04/01/12 OW TC SF SF 1 "B" "C" FIG 2: FINGER GUARD "E" 2 FINGER GAURD FELT FILTER FIG 1: FILTER COVER FIG 2: FILTER COVER MESH FILTER FILTER SET "F" "F" "C" FIG 1: FINGER GUARD SIZES ITEMS 40 X 40 60 X 60 80 X 80 92 X 92 120 X 120 FINGER GUARD, FILTER COVER, MESH FILTER AND FELT FILTER RCP-040-T RCP-060-T RCP-080-T RCP-092-T RCP-120-T MESH FILTER RMF-040-T RMF-060-T RMF-060-T RMF-092-T RMF-120-T FINGER GUARD ONLY RFG-040-T RFG-060-T RFG-080-T RFG-092-T RFG-120-T FELT FILTER RFF-040-T RFF-060-T RFF-080-T RFF-092-T RFF-120-T 3 4 PART No. FIG FINGER GAURD PART No. DIM "A" +/- 0.5 [.02] DIM "B" +/- 0.3 [.01] DIM "C" +/- 0.3 [.01] RCP-040-T 2 RFG-040-T 43 [1.69] 32.2 [1.27] 4.3 [0.17] RFG-060-T 60.5 [2.38] 50.1 [1.97] RFG-080-T 80.6 [3.17] 71.8 [2.83] RFG-092-T 92.3 [3.63] 82.4 [3.24] RFG-120-T 120.6 [4.75] 105.5 [4.15] RCP-080-T RCP-092-T RCP-120-T 1 INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT. ALL DIMENSIONS IN mm GENERAL TOLERANCES 0.25 UNLESS OTHERWISE STATED ANGULAR 1 RICHCO, INC. HOLE DIM FILTER COVER FIG PART NO. "D" Min RFC-040-T 2 4.1 [0.16] RFC-080-T RFC-092-T 6.2 [0.24] RFC-120-T DIM "F" +/- 0.3 [.01] 46.5 [1.83] 8.4 [0.33] B THIRD ANGLE 1 84.8 [3.34] 96.9 [3.81] C COLOUR: MATERIAL: SEE NOTES BLACK PART No: DESCRIPTION: FAN FILTER ASSEMBLY 64.9 [2.56] RFC-060-T 6.0 [0.24] DIM "E" +/- 0.5 [.02] 12.5 [0.49] 126.3 [4.97] DRG No: DRN D SEE TABLE NPR No: EU09-0054 09-107 L.P A 3 FILTER COVERS NOT SUPPLIED SEPERATELY PART No. FOR REFERENCE ONLY FINGER GUARD RCP-060-T FILTER COVER NOTES: FINGER GUARD MATERIAL: NYLON 6/6 25% GLASS FILLED UL94 V-0 (RMS-027) FILTER COVER MATERIAL: NYLON 6/6 25% GLASS FILLED UL94 V-0 (RMS-027) FELT FILTER MATERIAL: 100% POLYESTER FIBRE (RMS-028) MESH FILTER MATERIAL: STAINLESS STEEL AISI 304 (RMS-029) ALTERNATE UNITS FOR REFERENCE ONLY FIG 1 MESH DIAGONAL CONFIGURATION SHOWN FOR ILLUSTRATION PURPOSE ONLY AND VARIES DEPENDING ON ACTUAL SIZE SUPPLIED WWW.RICHCO-INC.COM FILTER SETS 2 DATE CHKD TC 2/9/09 E DATE 14.10.09 SHEET SIZE A4 SCALE SHEET No. NTS 1 OF 1 FORM No. 0143/00 4