STL-1-350-3-19S

MATERIAL: NYLON MATERIAL: NYLON 6/6 6/6 UL-94 V-0, RMSUL-94 V-2, RMS-01 19 COLOUR:NATURAL COLOUR:NATURAL 1 2 3 4 C B A "A" STL-J#-250-4M-01 STL-J#-250-4M-19 4[0.157] STL-#-250-3-01 STL-#-250-3-19 4.8[0.189] STL-J#-250-6M-01 STL-J#-250-6M-19 6[0.236] STL-J#-250-8M-01 STL-J#-250-8M-19 8[0.315] STL-J#-250-10M-01 STL-J#-250-10M-19 10[0.394] STL-J#-250-12M-01 STL-J#-250-12M-01 12[0.472] STL-#-250-8-01 STL-#-250-8-19 12.7[0.500] STL-#-250-12-01 STL-#-250-12-19 19.1[0.752] STL-#-250-16-01 STL-#-250-16-19 25.4[1] 31.8[1.252] STL-#-250-20-01 STL-#-250-20-19 STL-J#-350-4M-01 STL-J#-350-4M-19 4[0.157] STL-#-350-3-01 STL-#-350-3-19 4.8[0.189] STL-J#-350-6M-01 STL-J#-350-6M-19 6[0.236] STL-J#-350-8M-01 STL-J#-350-8M-19 8[0.315] STL-J#-350-10M-01 STL-J#-350-10M-19 10[0.394] STL-J#-350-12M-01 STL-J#-350-12M-19 12[0.472] STL-#-350-8-01 STL-#-350-8-19 12.7[0.500] STL-#-350-12-01 STL-#-350-12-19 19.1[0.752] STL-#-350-16-01 STL-#-350-16-19 25.4[1] STL-#-350-20-01 STL-#-350-20-19 31.8[1.252] STL-J#-450-4M-01 STL-J#-450-4M-19 4[0.157] STL-#-450-3-01 STL-#-450-3-19 4.8[0.189] STL-J#-450-6M-01 STL-J#-450-6M-19 6[0.236] STL-J#-450-8M-01 STL-J#-450-8M-19 8[0.315] STL-J#-450-10M-01 STL-J#-450-10M-19 10[0.394] STL-J#-450-12M-01 STL-J#-450-12M-19 12[0.472] STL-#-450-8-01 STL-#-450-8-19 12.7[0.500] STL-#-450-12-01 STL-#-450-12-19 19.1[0.752] STL-#-450-16-01 STL-#-450-16-19 25.4[1] STL-#-450-20-01 STL-#-450-20-19 31.8[1.252] STL-J#-600-4M-01 STL-J#-600-4M-19 4[0.157] STL-#-600-3-01 STL-#-600-3-19 4.8[0.189] STL-J#-600-6M-01 STL-J#-600-6M-19 6[0.236] STL-J#-600-8M-01 STL-J#-600-8M-19 8[0.315] STL-J#-600-10M-01 STL-J#-600-10M-19 10[0.394] STL-J#-600-12M-01 STL-J#-600-12M-19 12[0.472] STL-#-600-8-01 STL-#-600-8-19 12.7[0.500] STL-#-600-12-01 STL-#-600-12-19 19.1[0.752] STL-#-600-16-01 STL-#-600-16-19 25.4[1] STL-#-600-20-01 STL-#-600-20-19 31.8[1.252] STL-J#-750-4M-01 STL-J#-750-4M-19 4[0.157] STL-#-750-3-01 STL-#-750-3-19 4.8[0.189] STL-J#-750-6M-01 STL-J#-750-6M-19 6[0.236] STL-J#-750-8M-01 STL-J#-750-8M-19 8[0.315] STL-J#-750-10M-01 STL-J#-750-10M-19 10[0.394] STL-J#-750-12M-01 STL-J#-750-12M-19 12[0.472] STL-#-750-8-01 STL-#-750-8-19 12.7[0.500] STL-#-750-12-01 STL-#-750-12-19 19.1[0.752] STL-#-750-16-01 STL-#-750-16-19 25.4[1] STL-#-750-20-01 STL-#-750-20-19 31.8[1.252] "B" REF. STANDARD FIX (DELETE THE # IN THE PART NUMBER) BUNDLE 0.21 5.6 19.1[0.752] D 5.1-7.65[0.2010.301] 0.11 2.8 REF FIX 2 BUNDLE DIA. FIX 3 "A" TO SNAP-LOCK INTO INDICATED DIA. HOLES AND PANEL THICKNESS TO PRESS-FIT IN A 7.9[0.31] 0.08[0.003] DIA. HOLE, IN A 6.4[0.25] MINIMUM THICK PANEL FIX 5 FIX 6 0.12 3.1 0.07 1.7 0.1 0.15 2.70 +0.10 0.1 0.008 R0.20 4 POSN. 0.26 6.6 REF TO SNAP-LOCK IN A 6.5[0.256] 0.0875[0.0034] DIA. HOLE, IN A 0.8 TO 1.6[0.03 TO 0.06] THICK PANEL 0.58 15.9 REF 17.8-20.3[0.7010.799] 0.020 R0.50 8 POSN. 0.11 2.8 REF 0.04 1 0.59 15 REF TO SUIT PANEL DETAIL FOR STLJ9 FIX, IN A 0.8 TO 1.6[0.03 TO 0.06] THICK PANEL NOTE: ALTERNATE DIMENSIONS FOR REFERENCE ONLY ALL DIMENSIONS IN mm[Inches] GENERAL TOLERANCES 0.25 UNLESS OTHERWISE STATED WWW.RICHCO-INC.COM 1 DECIMAL PLACE 2 DECIMAL PLACES ANGULAR 1 COLOUR: DESCRIPTION: PART No: STAND-OFF TWIST LOCK See Table DRN D THIRD ANGLE MATERIAL: See table SF C 3 INFORMATION CONTAINED IN THIS DOCUMENT IS CONFIDENTIAL TO RICHCO INTERNATIONAL Co. Ltd. AND MAY NOT BE DISCLOSED OR REPRODUCED IN WHOLE OR PART WITHOUT THEIR WRITTEN CONSENT. See table DRG No: 011-014 REPLACE # WITH FIX STYLE REQUIRED. EXAMPLE: "STL-J1-250-4M-01" B 0.22 4 +0.10 0.07 1.80 +0.10 0.1 RICHCO, INC. 0.62 15.8 TO SUIT PANEL DETAIL FOR STLJ7 FIX, IN A 0.78 TO 2[0.031 TO 0.08] THICK PANEL 0.094 Ø 2.40 TO SNAP-LOCK IN A 6[0.236] 0.08[0.003]DIA. HOLE, IN A 0.78 TO 2[0.03 TO 0.079] THICK PANEL 0.21 5.4 REF 36.8[1.449] 0.29 7.30 0.20 0.34 7.20 +0.20 FIX-9 FIX 7 2 PANEL DETAIL FOR STL-J9 FIX PANEL DETAIL FOR STL-J7 FIX 0.26 6.6 REF 32.5[1.280] 12.7-15.2[0.5000.598] SF "B" 0.44 11.1 0.75 19 REF DRN 31/03/11 CO2011127 0.34 8.7 REF 0.20 5.1 DATE TO SNAP-LOCK IN A 4[0.157] 0.08[0.003] DIA. HOLE, IN A 0.8 TO 2[0.03 TO 0.079] THICK PANEL OTHER COLOURS AVAILABLE BY SPECIAL ORDER A 01 0.52 14.3 REF 0.11 2.9 TO SNAP-LOCK IN A 5.5[0.217] SQUARE HOLE, IN A 0.8 TO 2[0.03 TO 0.079] THICK PANEL 10.2-12.7[0.4020.500] MODIFICATION. 1 0.56 14.5 REF 27.7[1.091] REV. 0.12 2.8 REF 0.22 5.60 0.56 14.3 REF TO SNAP-LOCK IN A 4.75[0.19] 0.08[0.003] DIA. HOLE, IN A 0.8 TO 2 [0.03 TO 0.079]THICK PANEL 23.1[0.909] 7.6 -10.2[0.2990.402] FIX 1 F E NPR No: RR10-0002 DATE 14/02/11 E CHKD TC DATE 14/02/11 SHEET SIZE SCALE NTS 4 A4 SHEET No. 1 OF 1 FORM No. 0143/00