WSLT-01-2-01

D essentracomponents.com B Condition of Sale can be found on our website: essentra.com. Essentra Components does not warrant that the files will be error free and may create new versions ("Upgrades") at any time, which may correct such errors. Essentra Components has no obligation to notify you of such upgrades. Any upgraded file will be published to the website, when it becomes available. F G A C 2013 Essentra Components. All rights reserved. Registered in England, Company No. 547495. Registered Office: Avebury House, 201-249 Avebury Boulevard, Milton Keynes, MK9 1AU You are not permitted to load any of the files on to a network server for the purposes of distribution to one or more other computer(s) on that network or to effect such distribution. Essentra Components shall not be liable for any loss or damage whatsoever or however caused, arising directly or indirectly from the use of the files. 5.0 [0.197] E UNLESS OTHERWISE STATED ALL DIMENSIONS IN mm DO NOT SCALE LINEAR TOLERANCE THIRD ANGLE PROJECTION SIZE (0.0) (0.00) (0) 0-10mm 0.10 0.15 0.5 10-30mm 0.15 0.20 0.5 30-50mm 0.20 0.5 0.30 50-100mm 0.25 0.8 0.50 ANGULAR TOLERANCE 0.5 DEGREES 100-200mm 0.40 1.5 0.80 UNSPECIFIED RADII 0.25mm 200-300mm 0.80 DRAFT ANGLE 0.5 DEGREES 2.0 1.20 300-500mm 1.00 DIMENSIONS IN BRACKETS [ ] ARE 3.0 2.00 +500mm 1.50 IN INCHES FOR REFERENCE ONLY 5.0 3.00 ORG.SCALE Part Number Material WSLT-01-2-01 NYLON6/6 A B C D E F 8.8 10.7 14.6 16.8 14.3 5.6 [0.346''] [0.421''] [0.575''] [0.66''] [0.563''] [0.22''] G FIT HOLE Part ID 2.8 4.8 1147440 [0.11''] [0.187''] MATERIAL ITEM No. TITLE UNCONTROLLED NTS CREATE DATE. 05/Jul/2016 SEE CHART - NATURAL WSLT-01-2-01 WIRE SADDLE TOP LOCKING DWG.No. ISSUE No. P110116-1 1