®
RT9807
Micro-Power Voltage Detector with Manual Reset
General Description
Features
The RT9807 is a micro-power voltage detector with
deglitched manual reset input which supervises the power
supply voltage level for microprocessors (μP) or digital
systems. It provides internally fixed threshold levels
ranging from 1.2V to 3.3V with 0.1V per step, which covers
most digital applications. It features low supply current of
3μA.
Monitor System Voltages from 0.9V to 5.5V
Capacitor-Adjustable Reset Timeout Period
Manual Reset Input
Low Quiescent Current
High Accuracy ±1.5%
Low Functional Supply Voltage 0.9V
N-Channel Open-Drain Output
Small SOT-23-5 Package
RoHS Compliant and Halogen Free
The RT9807 performs supervisory function by sending out
a reset signal whenever the VDD voltage falls below a
preset threshold level. The timeout period of this reset
signal can be adjusted via an external capacitor. Once
VDD recovers above the threshold level, the reset signal
will be released after a certain delay time. To manually
pull reset signal low, just pull the manual reset input (MR)
below the specified logic-low level.
The RT9807 is available in an SOT-23-5 package.
Ordering Information
Applications
Computers
Controllers
Intelligent Instruments
Critical uP and uC Power Monitoring
Portable/Battery-Powered Equipment
Pin Configurations
(TOP VIEW)
RT9807Package Type
B : SOT-23-5
VDD
CT
5
4
Lead Plating System
G : Green (Halogen Free and Pb Free)
Output Voltage
12 : 1.2V
13 : 1.3V
:
32 : 3.2V
33 : 3.3V
2
RST GND MR
SOT-23-5
Typical Application Circuit
R
470k
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
Suitable for use in SnPb or Pb-free soldering processes.
ments of IPC/JEDEC J-STD-020.
Marking Information
3
VDD
RT9807
5
1
VDD
RST
CIN
1uF
3
MR
GND
2
CT 4
Reset
CCT
10nF
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
DS9807-04 January 2019
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
1
RT9807
Functional Pin Description
Pin No.
Pin Name
Pin Function
1
RST
Reset Output Pin. (Open drain)
2
GND
Ground Pin.
3
MR
Manual Reset Pin.
4
CT
Connect an external capacitor for setting reset timeout period.
5
VDD
Supply Voltage Input Pin.
Function Block Diagram
N-MOSFET
-
VDD
+
Comparator
VREF
Timeout
Setting
GND
Manual
Reset
MR
Absolute Maximum Ratings
CT
(Note 1)
Supply Input Voltage, VDD ----------------------------------------------------------------------------------------------Reset Output Voltage, RST --------------------------------------------------------------------------------------------Other Pins ------------------------------------------------------------------------------------------------------------------Power Dissipation, PD @ TA = 25°C
SOT-23-5 -------------------------------------------------------------------------------------------------------------------Package Thermal Resistance (Note 2)
SOT-23-5, θJA --------------------------------------------------------------------------------------------------------------Junction Temperature Range -------------------------------------------------------------------------------------------Lead Temperature (Soldering, 10 sec.) ------------------------------------------------------------------------------Storage Temperature Range -------------------------------------------------------------------------------------------ESD Susceptibility (Note 3)
HBM (Human Body Mode) ---------------------------------------------------------------------------------------------MM (Machine Mode) ------------------------------------------------------------------------------------------------------
Recommended Operating Conditions
RST
−0.3V to 6V
−0.3V to 6V
−0.3V to 6V
0.4W
250°C/W
150°C
260°C
−65°C to 150°C
2kV
200V
(Note 4)
Junction Temperature Range -------------------------------------------------------------------------------------------- −40°C to 125°C
Ambient Temperature Range -------------------------------------------------------------------------------------------- −40°C to 85°C
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
www.richtek.com
2
is a registered trademark of Richtek Technology Corporation.
DS9807-04 January 2019
RT9807
Electrical Characteristics
(TA = 0 to 70°C, unless otherwise specified)
Parameter
Symbol
Operating VDD Range
VDD
Supply Current
IDD
Reset Threshold
VTH
Threshold Voltage Accuracy
VTH
Threshold Voltage Hysteresis
VHYS
Test Conditions
Min
Typ
Max
0.9
--
5.5
Temp = 0 to 70°C
1
--
5.5
VTH = 3V, VDD = 4.5V
--
3
5
A
1.2
--
3.3
V
1.5
--
1.5
2
--
2
--
50 x VTH
--
mV
--
100
--
ppm/C
Temp = 25°C
Temp = 25°C
Temp = 0 to 70°C
Reset Threshold Tempco
Unit
V
%
VDD Drop to Reset Delay
tRP
Drop = VTH – 250mV
--
100
--
s
RST Output Voltage Low
(Note 5)
VOL
VDD < VTH(min.), ISINK = 3.5mA
--
--
0.4
V
VIH
0.7VDD
--
--
VIL
--
--
0.25VDD
MR Glitch Rejection
--
80
--
ns
MR to Reset Propagation Delay tMR
--
4
--
s
MR Pull-up Resistance
RMR
--
20
--
k
Reset Timeout Period
tRP
2
5
7
0.15
0.275
0.4
CT Source Current
IRAMP
--
240
--
nA
CT Source Threshold Voltage
VTH-RAMP
--
0.65
--
V
--
33
--
mV
Logic-High
MR Input
Threshold voltage Logic-Low
CCT = 1500pF
CCT = 0pF
CT Threshold Hysteresis
V
ms
Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. θJA is measured in natural convection at TA = 25°C on a low effective thermal conductivity test board of JEDEC 51-3
thermal measurement standard.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Note 5. The voltage VOL can be calculated by VOL = VDD - Ir x R. Where R is the pull-up resistor and Ir is the current flowing through
the pull-up resistor. For typical application R = 100kΩ, VOL is less than 0.2V.
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
DS9807-04 January 2019
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
3
RT9807
Typical Operating Characteristics
Supply Current vs. Input Voltage
CT Threshold Voltage vs. Temperature
6
Supply Current (μA)
5
TA = 125°C
TA = 85°C
TA = 25°C
4
3
TA = −40°C
2
1
CT Threshold Voltage (V)
0.67
0.66
Rising
0.65
0.64
0.63
Falling
0.62
0.61
CT Open
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
R = 470kΩ
0.6
5.5
-50
-25
0
150
100
10
1
VDD = 5V, R = 470kΩ
0.1
1
10
100
VDD Drop Reset Delay Time (μs)
Reset Delay Time (ms)
1000
0.01
75
100
125
VDD = 5V, CT Open, R = 470kΩ
130
110
90
70
50
-50
1000
-25
0
Cpacitance (nF)
25
50
75
100
125
Temperature (°C)
Power On Reset Delay Time vs. Temperature
Detector Threshold vs. Temperature
1.7
350
1.65
Rising
1.6
Falling
1.55
1.5
1.45
VDD = 5V, CT Open, R = 470kΩ
1.4
-50
-25
0
25
50
75
100
Temperature (°C)
Copyright © 2019 Richtek Technology Corporation. All rights reserved.
www.richtek.com
4
125
Power On Reset Delay Time (μs)
Detector Threshold (V)
50
VDD Drop Reset Delay Time vs. Temperature
Reset Delay Time vs Capacitance
10000
0.1
0.001
25
Temperature (°C)
Input Voltage (V)
300
250
200
150
VDD = 5V, CT Open, R = 470kΩ
100
-50
-25
0
25
50
75
100
125
Temperature (°C)
is a registered trademark of Richtek Technology Corporation.
DS9807-04 January 2019
RT9807
Application Information
VCC
The RT9807 provides adjustable reset delay time to fit
the need of a variety of μP applications. The reset delay
time of the RT9807 can be adjusted by connecting a
capacitor between the CT pin and GND. The CT capacitor
must fit the need of low-leakage (
很抱歉,暂时无法提供与“RT9807-30GB”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 3000+1.511373000+0.18309
- 6000+1.395516000+0.16905
- 9000+1.337029000+0.16197
- 15000+1.2717815000+0.15406
- 21000+1.2334421000+0.14942
- 30000+1.1963930000+0.14493
- 75000+1.1160075000+0.13519
- 国内价格 香港价格
- 1+6.309141+0.76428
- 10+3.8991310+0.47233
- 25+3.2544125+0.39423
- 100+2.51601100+0.30479
- 250+2.15318250+0.26083
- 500+1.93047500+0.23386
- 1000+1.744671000+0.21135