R1154N055B

R1154x SERIES 150mA Voltage Regulator (Wide Input Voltage Range) NO.EA-100-061107 OUTLINE The R1154x series are CMOS-based voltage regulator (VR) ICs. The R1154xxxxxx has features of high output voltage accuracy and ultra-low supply current. A peak current limit circuit, a short current limit circuit, and a thermal shutdown circuit are built in the R1154x series. The regulator output voltage is fixed in the R1154xxxxB, while adjustable type is the R1154x001C. Output voltage accuracy is ±2.0%. Since the packages for these ICs are the SOT-89-5 and SOT-23-5, high density mounting of the ICs on boards is possible. FEATURES • • • • • • • • • • Supply Current ............................................................. Typ. 5.0µA Standby Current ........................................................... Typ. 0.1µA Output Voltage Accuracy.............................................. ±2.0% Wide Output Voltage Range ........................................ 2.5V to 12.0V(xxxB) adjustable in the range of 2.5V to VIN or 24.0V (001C) Input Voltage ................................................................ Max. 24.0V Output Current ............................................................. Min. 140mA (VIN=VOUT+2.0V, 2.5V Output type) Min. 150mA (VIN=VOUT+2.0V, 3.0V Output type) Package ....................................................................... SOT-89-5, SOT-23-5 Built-in Peak Current Limit Circuit Short Current Limit Circuit Thermal Shutdown Circuit APPLICATIONS • • • • Power source for home appliances such as refrigerators, rice cookers, Electronic water warmers, etc. Power source for car audio equipment, car navigation system, and ETC system. Power source for notebook PCs, digital TVs, cordless phones, and LAN system. Power source for copiers, printers, facsimiles, and scanners. 1 R1154x BLOCK DIAGRAMS R1154xxxxB Fixed Output Voltage Thermal Protection VIN + Vref Short Peak Current Protection Protection CE GND CE Vref Short Peak Current Protection Protection GND VOUT VIN + R1154xxxxC Adjustable Output Type Thermal Protection VOUT ADJ SELECTION GUIDE The output voltage can be selected at the user’s request. The selection can be made with designating the part number as follows; R1154xxxxx-xx-x ↑ ↑ ↑↑ ↑ a b cd e Code a ←Part Number Contents Designation of package type; H: SOT-89-5 N: SOT-23-5 Designation of output voltage: Adjustable: 001 (Reference voltage=2.5V) Fixed: Stepwise Setting in the range from 2.5V to 12.0V Designation of Output Type; B: Fixed Output Type C: Adjustable Output Type Designation of Taping Type;T1, T2 (SOT-89-5), TR (SOT-23-5) (Refer to Taping Specifications) Designation of composition of plating: −F: Lead free plating (SOT-23-5,SOT-89-5) b c d e 2 R1154x PIN CONFIGURATION SOT-89-5 5 4 5 SOT-23-5 4 (mark side) 1 2 3 1 2 3 PIN DESCRIPTION • SOT-89-5 Pin No 1 2 3 4 5 Symbol VOUT GND CE NC/ADJ VDD Ground Pin Chip Enable Pin B version: No Connection C version: Reference Voltage of Adjustable Output Pin Input Pin Description Voltage Regulator Output Pin • SOT-23-5 Pin No 1 2 3 4 5 Symbol VOUT GND VDD NC/ADJ CE Ground Pin Input Pin B version: No Connection C version: Reference Voltage of Adjustable Output Pin Chip Enable Pin Description Voltage Regulator Output Pin 3 R1154x ABSOLUTE MAXIMUM RATINGS Symbol VIN VCE VOUT VADJ IOUT PD Topt Tstg Input Voltage Input Voltage (CE Input Pin) Output Voltage Output Voltage (ADJ Pin) Output Current Power Dissipation (SOT-23-5) * Power Dissipation (SOT-89-5) * Operating Temperature Storage Temperature Note1 Note1 Item Rating 26.0 -0.3 to VIN+0.3 -0.3 to VIN+0.3 -0.3 to VIN+0.3 250 420 900 -40 to +105 -55 to +125 Unit V V V V mA mV °C °C *Note1) For Power Dissipation please refer to PACKAGE INFORMATION to be described. ELECTRICAL CHARACTERISTICS • R1154xxxxB Topt=25°C Symbol VIN VOUT IOUT ISS Istandby ∆VOUT/ ∆IOUT ∆VOUT/ ∆VIN VDIF ∆VOUT/ ∆Topt Ilim VCEH VCEL TSD TSR Item Input Voltage Output Voltage Output Current Supply Current Standby Current Load regulation Line regulation Dropout Voltage Output Voltage Temperature Coefficient Short Current Limit CE “H” Input Voltage CE “L” Input Voltage Thermal Shutdown Temperature Thermal Shutdown Released Temperature Conditions VIN=VOUT+2.0V VIN−VOUT=2.0V VIN=VCE VIN-VOUT=2.0V VIN=24V, VCE=0V VIN−VOUT=2.0V 1mA < IOUT < 40mA = = IOUT=20mA VOUT+1V < VIN = IOUT=20mA VIN−VOUT=2.0V IOUT=20mA −40°C < Topt < 105°C = = VOUT=0V < = Min. ×0.98 Typ. Max. 24 ×1.02 Unit V V Refer to the Output Current Table 5 0.1 10 1.0 µA µA Refer to the Load Regulation Table 24V 0.05 0.20 %/V Refer to the Dropout Voltage Table ±100 45 2.1 0.0 VIN 0.3 150 125 ppm/°C mA V V °C °C Junction Temperature Junction Temperature 4 R1154x • R1154xxxxC Topt=25°C Symbol VIN VOUT IOUT ISS Istandby ∆VOUT/∆IOUT ∆VOUT/∆VIN VDIF ∆VOUT/ ∆Topt Ilim VCEH VCEL TSD TSR Item Input Voltage Output Voltage Output Current Supply Current Standby Current Load regulation Line regulation Dropout Voltage Output Voltage Temperature Coefficient Short Current Limit CE “H” Input Voltage CE “L” Input Voltage Thermal Shutdown Temperature Thermal Shutdown Released Temperature Conditions VIN=VOUT+2.0V,VOUT=VADJ IOUT=20mA VIN=VOUT+2.0V,VOUT=VADJ VIN=VOUT+2.0V,VOUT=VADJ VCE=VIN VIN=24V, VOUT=VADJ VCE=0V VIN=VOUT+2.0V,VOUT=VADJ 1mA < IOUT < 40mA = = VOUT+1V < VIN < 24V = = VOUT=VADJ,IOUT=20mA VOUT=VADJ,IOUT=20mA VIN=VOUT+2.0V,VOUT=VADJ IOUT=20mA -40°C < Topt < 105°C = = VOUT=VADJ=0V Min. Typ. Max. 24 Unit V V mA 2.45 140 2.50 2.55 5 0.1 20 0.05 0.20 ±100 45 2.1 0.0 10 1.0 50 0.20 0.40 µA µA mV %/V V ppm/°C mA VIN 0.3 150 125 V V °C °C Junction Temperature Junction Temperature 5 R1154x • Output Current (Topt=25°C) Output Voltage VOUT (V) 2.5 3.0 < = < = Output Current (mA) Min. 140 150 VOUT VOUT < = < = 2.9 12.0 • Load Regulation (Topt=25°C) Output Voltage VOUT (V) 2.5 3.1 5.1 < = < = < = Load Regulation (mV) Typ. 20 30 40 Max. 50 75 115 VOUT VOUT VOUT < = < = < = 3.0 5.0 12.0 • Dropout Voltage (Topt=25°C) Output Voltage VOUT (V) 2.5 7.1 10.1 < = < = < = Dropout Voltage (V) Typ. 0.20 0.25 0.30 Max. 0.40 0.50 0.55 VOUT VOUT VOUT < = < = < = 7.0 10.0 12.0 TYPICAL APPLICATIONS IN IN OUT VIN CIN CE GND VOUT OUT CIN COUT CE VIN VOUT GND ADJ COUT Fixed Output Voltage Type Adjustable Type 6 R1154x TEST CIRCUITS IN VDD CIN IOUT R1154xxxxB SERIES CE VOUT GND OUT IN ISS VDD CIN COUT R1154xxxxB SERIES CE VOUT GND OUT COUT R1154xxxxB Standard Test Circuit IN VDD P .G. IOUT R1154xxxxB SERIES CE VOUT GND OUT R1154xxxxB Supply Current Test Circuit IN VDD CIN R1154xxxxB SERIES CE VOUT GND COUT I1 I2 OUT COUT R1154xxxxB Input Transient Response Test Circuit IN VDD CIN R1154x001C SERIES CE ADJ GND VOUT R1 COUT R2 IOUT OUT R1154xxxxB Load Regulation Test Circuit IN ISS VDD CIN R1154x001C SERIES CE ADJ GND VOUT R1 COUT R2 OUT R1154x001C Standard Test Circuit IN VDD P .G. R1154x001C SERIES CE ADJ GND VOUT R1 COUT R2 IOUT OUT CIN IN R1154x001C Supply Current Test Circuit VDD R1154x001C SERIES CE ADJ GND VOUT R1 R2 COUT I1 OUT I2 R1154x001C Input Transient Response Test Circuit R1154x001C Load Transient Response Test Circuit 7 R1154x TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current R1154x025B Topt=25˚C 3 3 R1154x025B VIN=4.5V Output Voltage VOUT(V) 2.5 2 VIN=3.5V 1.5 1 0.5 0 0 100 200 300 4.5V 4.0V 5.5V Output Voltage VOUT(V) 2.5 2 1.5 105˚C 1 0.5 0 0 100 200 -40˚C 25˚C 300 Output Current IOUT(mA) Output Current IOUT(mA) R1154x030B Topt=25˚C 3.5 3.5 R1154x030B VIN=5.0V Output Voltage VOUT(V) 2.5 2 1.5 1 0.5 0 0 VIN=4.0V 4.5V Output Voltage VOUT(V) 3 5.0V 6.0V 3 2.5 2 1.5 1 0.5 0 0 100 200 105˚C -40˚C 25˚C 100 200 300 300 Output Current IOUT(mA) Output Current IOUT(mA) R1154x050B Topt=25˚C 6 6 R1154x050B VIN=7.0V Output Voltage VOUT(V) 5 4 VIN=6.0V 3 2 1 0 0 100 200 Output Voltage VOUT(V) 6.5V 7.0V 5 4 3 2 1 0 -40˚C 25˚C 105˚C 8.0V 300 0 100 200 300 Output Current IOUT(mA) Output Current IOUT(mA) 8 R1154x R1154x090B Topt=25˚C 10 9 8 7 6 5 4 3 2 1 0 0 12V 11V 10.5V 10 9 8 7 6 5 4 3 2 1 0 0 50 100 R1154x090B VIN=11.0V Output Voltage VOUT(V) Output Voltage VOUT(V) VIN=10.0V 25˚C 105˚C -40˚C 100 200 300 150 200 250 300 Output Current IOUT(mA) Output Current IOUT(mA) 2) Input Voltage vs. Output Voltage (Topt=25°C) R1154x025B 3.5 4 R1154x030B Output Voltage VOUT(V) Output Voltage VOUT(V) 3 IOUT=1mA 3.5 IOUT=1mA 3 IOUT=20mA 2.5 IOUT=40mA 2 0 5 10 15 20 25 2.5 2 IOUT=20mA IOUT=40mA 1.5 0 5 10 15 20 25 Input Voltage VIN(V) Input Voltage VIN(V) R1154x050B 6 10 R1154x090B Output Voltage VOUT(V) Output Voltage VOUT(V) 5.5 IOUT=20mA IOUT=1mA 5 9.5 IOUT=20mA IOUT=1mA 9 4.5 IOUT=40mA 4 0 5 10 15 20 25 8.5 IOUT=40mA 8 0 5 10 15 20 25 Input Voltage VIN(V) Input Voltage VIN(V) 9 R1154x 3) Dropout Voltage vs. Output Current R1154x025B 2.5 2.5 R1154x030B Dropout Voltage VDIF(V) Dropout Voltage VDIF(V) 2 Topt=105˚C 1.5 25˚C 1 -40˚C 0.5 0 0 20 40 60 80 100 120 140 160 2 1.5 25˚C 1 0.5 0 0 20 40 60 Topt=105˚C -40˚C 80 100 120 140 160 Output Current IOUT(mA) Output Current IOUT(mA) R1154x050B 2.5 2.5 R1154x090B Dropout Voltage VDIF(V) Dropout Voltage VDIF(V) 2 1.5 1 0.5 0 0 20 40 60 80 100 120 140 160 25˚C 2 1.5 25˚C 1 0.5 0 0 20 40 60 80 100 120 140 160 -40˚C Topt=105˚C Topt=105˚C -40˚C Output Current IOUT(mA) Output Current IOUT(mA) 4) Output Voltage vs. Temperature R1154x025B VIN=4.5V, IOUT=20mA 2.60 3.10 R1154x030B VIN=5.0V, IOUT=20mA Output Voltage VOUT(V) 2.55 Output Voltage VOUT(V) 0 50 100 3.05 2.50 3.00 2.45 2.95 2.40 -50 2.90 -50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) 10 R1154x R1154x050B VIN=7.0V, IOUT=20mA 5.2 9.4 R1154x090B VIN=11.0V, IOUT=20mA Output Voltage VOUT(V) 5.1 Output Voltage VOUT(V) 0 50 100 9.2 5.0 9.0 4.9 8.8 4.8 -50 8.6 -50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) 5) Supply Current vs. Input Voltage (Topt=25°C) R1154x025B 12 12 R1154x030B Supply Current ISS(µA) 10 8 6 4 2 0 Supply Current ISS(µA) 10 8 6 4 2 0 0 5 10 15 20 25 0 5 10 15 20 25 Input Voltage VIN(V) Input Voltage VIN(V) R1154x050B 12 12 R1154x090B Supply Current ISS(µA) 10 8 6 4 2 0 Supply Current ISS(µA) 10 8 6 4 2 0 0 5 10 15 20 25 0 5 10 15 20 25 Input Voltage VIN(V) Input Voltage VIN(V) 11 R1154x 6) Supply Current vs. Temperature R1154x025B VIN=4.5V 12 12 R1154x030B VIN=5.0V Supply Current ISS(µA) 8 6 4 2 0 -50 Supply Current ISS(µA) 0 50 100 10 10 8 6 4 2 0 -50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) R1154x050B VIN=7.0V 12 12 R1154x090B VIN=11.0V Supply Current ISS(µA) 8 6 4 2 0 -50 Supply Current ISS(µA) 0 50 100 10 10 8 6 4 2 0 -50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) 7) Input Transient Response (IOUT=20mA, COUT=0.1µF, Topt=25°C) R1154x025B 10 15 Output Voltage VOUT(V) Input Voltage 6 4 Output Voltage 2 0 -2 0 2 4 6 8 10 12 14 -5 -10 5 0 Time T(ms) 12 Input Voltage VIN(V) 8 10 R1154x R1154x030B 10 15 Output Voltage VOUT(V) Input Voltage 6 4 2 0 -2 0 2 4 6 8 10 12 14 5 0 -5 -10 Output Voltage Time T(ms) R1154x050B 20 18 15 Output Voltage VOUT(V) 14 12 10 8 6 4 2 0 -2 -1 0 1 2 3 4 5 6 -10 -5 Output Voltage 0 5 Time T(ms) R1154x090B 24 22 20 Output Voltage VOUT(V) 18 16 14 12 10 8 6 4 -2 -1 0 1 Input Voltage 10 5 0 -5 2 3 4 5 6 Output Voltage Time T(ms) Input Voltage VIN(V) 20 15 Input Voltage VIN(V) 16 Input Voltage 10 Input Voltage VIN(V) 8 10 13 R1154x 8) Load Transient Response (COUT=0.1µF, Topt=25°C) R1154x025B VIN=4.5V 7 30 20 Output Current 5 1mA 4 3 2 1 -0.5 Output Voltage 0 -10 -20 -30 0 0.5 1 1.5 2 2.5 3 10 20mA 6 Time T(ms) R1154x030B VIN=5.0V 8 30 20 10 1mA 5 4 3 2 -0.5 Output Voltage 0 -10 -20 -30 0 0.5 1 1.5 2 2.5 3 20mA Output Current 7 6 Time T(ms) R1154x050B VIN=7.0V 9 30 20 10 1mA 6 5 Output Voltage 4 3 -0.5 -20 -30 0 0.5 1 1.5 2 2.5 3 0 -10 20mA 8 7 Output Current Time T(ms) 14 Output Current IOUT(mA) Output Voltage VOUT(V) Output Current IOUT(mA) Output Voltage VOUT(V) Output Current IOUT(mA) Output Voltage VOUT(V) R1154x R1154x090B VIN=11.0V 13 30 20 10 1mA 10 9 Output Voltage 8 7 -0.5 -20 -30 0 0.5 1 1.5 2 2.5 3 0 -10 20mA 12 11 Output Current Time T(ms) 9) Thermal Shutdown Characteristics R1154x050B 8 VIN=10V, IOUT=1mA Output Voltage VOUT(V) 7 6 5 4 3 2 1 0 0 20 40 60 80 100 120 140 Junction Temperature Tjct(°C) 160 180 Output Current IOUT(mA) Output Voltage VOUT(V) 15 R1154x TECHNICAL NOTES Phase Compensation Phase Compensation of the R1154x Series has been made internally for stable operation even though the load current would vary. Therefore, without the capacitors, CIN and COUT, the output voltage is regulated, however, for more stable operation, use capacitors as CIN and COUT. Especially, if the input line is long and impedance is high, CIN is necessary, moreover, if you use COUT, transient response will be improved. Recommended value is in the range from 0.1µF to 2.2µF. Wiring should be made as short as possible. Connect the capacitor, CIN between VDD pin and GND pin and COUT between VOUT and GND as close as possible. VDD R1154xxxxB SERIES CE VOUT GND IOUT VIN COUT CIN VDD R1154x001C SERIES CE ADJ GND VOUT R1 COUT R2 IOUT VIN CIN R1154xxxxB Typical Application R1154xxxxC Typical Application Thermal Shutdown Thermal shutdown function is included in the R1154x Series, if the junction temperature is equal or more than +150°C(Typ.), the operation of regulator would stop. After that, when the junction temperature is equal or less than +125°C(Typ.), the operation of regulator would restart. Unless the cause of rising temperature would remove, the regulator repeats on and off, and output waveform would be like consecutive pulses. Chip Enable Circuit Do not make voltage level of chip enable pin keep floating level, or in between VIH and VIL. Unless otherwise, Output voltage would be unstable or indefinite, or unexpected current would flow internally. * Technical Notes on Output Voltage Setting of C type Figure 1. Adjustable Regulator (C type) VOUT R1 ADJ IIC RIC GND R2 I2 2.5V VOUT I1 16 R1154x The Output Voltage of Regulator in R1154xxxxC may be adjustable for any output voltage between its 2.5V reference and its VDD setting level. An external pair of resistors is required, as shown in Figure 1. The complete equation for the output voltage is described step by step as follows; I1=IIC+I2..................................................................................................................................... (1) I2=2.5/R2 .................................................................................................................................. (2) Thus, I1=IIC+2.5/R2 ............................................................................................................................. (3) Therefore, VOUT=2.5+R1×I1 ........................................................................................................................ (4) Put Equation (3) into Equation (4),then VOUT=2.5+R1(IIC+2.5/R2) =2.5(1+R1/R2)+R1×IIC ....................................................................................................... (5) In 2nd term, or R1×IIC will produce an error in VOUT. In Equation (5), IIC=2.5/RIC .................................................................................................................................. (6) R1×IIC=R1×2.5/RIC =2.5×R1/RIC .................................................................................................................... (7) For better accuracy, choosing R1 (