R1163x SERIES
3-MODE 150mA LDO REGULATOR with the Reverse Current Protection
NO.EA-118-0605
OUTLINE
The R1163x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy and low supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply current. To prevent the destruction by over current, the current limit circuit is included. The R1163x Series have 3-mode. One is standby mode with CE or standby control pin. Other two modes are realized with ECO pin™. Fast Transient Mode (FT mode) and Low Power Mode (LP mode) are alternative with ECO pin™. Consumption current is reduced at Low Power Mode compared with Fast Transient Mode. The output voltage is maintained between FT mode and LP mode. Further, the reverse current protection circuit is built-in. Therefore, if a higher voltage than VDD pin is forced to the output pin, the reverse current to VDD pin is very small (Max. 0.1µA) , so it is suitable for backup circuit. Since the packages for these ICs are SOT-23-5, thin SON-6, and PLP1616-6 packages, high density mounting of the ICs on boards is possible.
FEATURES
• Ultra-Low Supply Current..................................Typ. 6.0µA (Low Power Mode), Typ. 70µA (Fast Transient Mode) • Standby Mode ...................................................Typ. 0.6µA • Reverse Current................................................Max. 0.1µA • Low Dropout Voltage.........................................Typ. 0.25V (IOUT=150mA Output Voltage=3.0V Type) • High Ripple Rejection .......................................Typ. 70dB (f=1kHz, FT Mode) • Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C • Excellent Line Regulation .................................Typ. 0.02%/V • High Output Voltage Accuracy .......................... ±1.5%(±2.5% at LP Mode) • Small Package ................................................SOT-23-5 (Super Mini-mold), SON-6,PLP1616-6 • Output Voltage ..................................................Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is possible • Built-in fold-back protection circuit ....................Typ. 40mA (Current at short mode) • Performs with Ceramic Capacitors ...................CIN=1.0µF,COUT=Ceramic 0.47µF
APPLICATIONS
• Precision Voltage References. • Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment. • Power source for battery-powered equipment.
1
R1163x
BLOCK DIAGRAM
R1163xxx1B ECO R1163xxx1D ECO
VDD
VOUT
VDD
Vref
VOUT
Vref Current Limit Current Limit Reverse Detector Reverse Detector
CE
GND
CE
GND
R1163xxx1E
ECO
VDD
VOUT
Vref Current Limit
CE
Reverse Detector
GND
2
R1163x
SELECTION GUIDE
The output voltage, the auto-discharge function, the package and the taping type for the ICs can be selected at the user's request. The selection can be available by designating the part number as shown below;
R1163xxx1x-xx
↑↑ ab Code a ↑↑ cd
←Part Number
Contents Designation of Package Type : N: SOT-23-5 (Mini-mold) D: SON-6 K: PLP1616-6 Setting Output Voltage (VOUT) : Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is possible. New options: 2.85V type: R1163x281x5-xx, 1.85V type: R1163x181x5-xx, 2.75V E version type: R1163x271E5-xx. Designation of Chip Enable Option : B: "H" active type and without the auto-discharge function. D: "H" active and with the auto-discharge function. E: "H" active type and without auto-discharge function. ECO logic reverse type (Low Power mode at ECO=”H”) Designation of Taping Type : Refer to Taping Specifications;TR type is the standard direction.
b
c
d
3
R1163x
PIN CONFIGURATIONS
SOT-23-5 Top View
5 4
SON-6 Bottom View
4 5 6
PLP1616-6 Top View
6 5 4
Bottom View
6 5 4
6
5
4
(mark side)
※
1
2
3
1
2
3
3
2
1
1 2 3 1 2 3
PIN DISCRIPTIONS
•
SOT-23-5
Pin No 1 2 3 4 5 Symbol VDD GND CE ECO VOUT Pin Description Input Pin Ground Pin Chip Enable Pin MODE alternative pin Output pin
SON-6
Pin No 1 2 3 4 5 6 Symbol VDD NC VOUT ECO GND CE Pin Description Input Pin No Connection Output pin MODE alternative pin Ground Pin Chip Enable Pin
•
* Tab in the parts have GND level. (They are connected to the reverse side of this IC.) Do not connect to other wires or land patterns.
PLP1616-6
Pin No 1 2 3 4 5 6 Symbol VOUT GND ECO CE NC VDD Pin Description Output pin Ground Pin MODE alternative pin Chip Enable pin No Connection Input Pin
* Tab in the parts have GND level. (They are connected to the reverse side of this IC.) Do not connect to other wires or land patterns.
4
R1163x
ABSOLUTE MAXIMUM RATINGS
Symbol VIN VECO VCE VOUT IOUT PD Topt Tstg Input Voltage Input Voltage (ECO Pin) Input Voltage (CE Pin) Output Voltage Output Current Power Dissipation (SOT-23-5) * Power Dissipation (SON-6) * Power Dissipation (PLP1616-6)* Operating Temperature Range Storage Temperature Range Item Rating 6.5 −0.3 ~ 6.5 −0.3 ~ 6.5 −0.3 ~ 6.5 180 420 500 560 −40 ~ 85 −55 ~ 125 °C °C mW Unit V V V V mA
* ) For Power Dissipation, please refer to PACKAGE INFORMATION to be described.
5
R1163x
ELECTRICAL CHARACTERISTICS
R1163xxx1B/D
Topt=25°C
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VIN=Set VOUT+1V,VECO=VIN ×0.985 ×1.015 1mA < IOUT < 30mA = = VOUT Output Voltage V VIN=Set VOUT + 1V,VECO=GND ×0.975 ×1.025 1mA < IOUT < 30mA = = VIN= Set VOUT+1V, IOUT=30mA 0.0 1.2 % −1.2 Output Voltage Deviation ∆VOUT between FT Mode and LP Mode VOUT > 2.0V = VOUT < 2.0V -24 0 +24 mV = IOUT Output Current 150 mA VIN−VOUT=1.0V VIN=Set VOUT+1V,VECO=VIN 20 40 Load Regulation(FT Mode) 1mA < IOUT < 150mA ∆VOUT/ = = mV ∆IOUT VIN=Set VOUT+1V,VECO=GND 10 45 Load Regulation(LP Mode) 1mA < IOUT < 150mA = = VDIF Dropout Voltage Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE VIN=Set VOUT+1V 70 100 ISS1 Supply Current(FT Mode) µA VECO=VIN, IOUT=0mA VIN=Set VOUT+1V 6.0 10.0 ISS2 Supply Current(LP Mode) µA VECO=GND, IOUT=0mA VIN=Set VOUT+1V, VCE = GND 0.4 1.0 Istandby Supply Current (Standby) µA VECO=GND Set VOUT+0.5V < VIN < 6.0V = = 0.02 0.10 Line Regulation(FT Mode) IOUT=30mA, VECO=VIN ∆VOUT/ %/V ∆VIN Set VOUT + 0.5V < VIN < 6.0V = = 0.05 0.20 Line Regulation(LP Mode) IOUT =30mA, VECO=GND f=1kHz 70 f=10kHz, 60 Ripple 0.2Vp-p,VIN=Set VOUT+1V dB RR Ripple Rejection(FT Mode) IOUT = 30mA, VECO = VIN If VOUT < 1.7V,then = VIN = Set VOUT+1V VIN Input Voltage 2.0 6.0 V ppm ∆VOUT/ Output Voltage IOUT=30mA ±100 Temperature Coefficient /°C ∆T −40°C < Topt < 85°C = = ILIM Short Current Limit 40 mA VOUT=0V IPD RPD VCEH VCEL en RLOW IREV 6
CE Pull-down Constant Current ECO Pull-down Resistance CE, ECO Input Voltage “H” CE, ECO Input Voltage “L” Output Noise ”H” (FT Mode) Output Noise ”L” (LP Mode) Nch Tr. On Resistance for auto-discharge function (Applied only to D version) Reverse Current
0.3 2 1.0 0.0 BW=10Hz to 100kHz BW=10Hz to 100kHz VCE=0V VOUT0>.5V, 0V
< =
0.6 30 6.0 0.4
µA MΩ V V µVrms Ω
5
30 40 60
VIN
< =
6V
0.0
0.1
µA
R1163x
R1163xxx1E
Topt=25°C
Symbol
Item
Conditions
Min. VOUT ×0.985 VOUT ×0.975
Typ.
Max. VOUT ×1.015 VOUT ×1.025
Unit
VIN = Set VOUT+1V VECO =GND 1mA < IOUT < 30mA = = V VOUT Output Voltage VIN = Set VOUT + 1V VECO =VIN 1mA < IOUT < 30mA = = VIN = Set VOUT+1V, IOUT =30mA 0.0 1.2 % −1.2 Output Voltage Deviation ∆VOUT between FT Mode and LP Mode VOUT > 2.0V = VOUT < 2.0V -24 0 +24 mV = IOUT Output Current 150 mA VIN − VOUT = 1.0V VIN =Set VOUT+1V, VECO=GND 20 40 Load Regulation (FT Mode) 1mA < IOUT < 150mA ∆VOUT/ = = mV ∆IOUT VIN = Set VOUT+1V,VECO=VIN 20 45 Load Regulation (LP Mode) 1mA < IOUT < 150mA = = VDIF Dropout Voltage Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE VIN = Set VOUT+1V 70 100 ISS1 Supply Current (FT Mode) µA VECO = GND, IOUT=0mA VIN = Set VOUT+1V 6.0 10.0 ISS2 Supply Current (LP Mode) µA VECO = VIN, IOUT=0mA VIN = Set VOUT+1V, VCE = GND 0.6 1.0 Istandby Supply Current (Standby) µA VECO=GND Set VOUT+0.5V < VIN < 6.0V = = 0.02 0.10 Line Regulation (FT Mode) IOUT = 30mA, VECO = GND ∆VOUT/ %/V ∆VIN Set VOUT + 0.5V < VIN < 6.0V = = 0.05 0.20 Line Regulation (LP Mode) IOUT = 30mA, VECO = VIN f = 1kHz 70 f = 10kHz, 60 Ripple 0.2Vp-p RR Ripple Rejection (FT Mode) dB VIN = Set VOUT + 1V IOUT = 30mA, VECO = GND If VOUT < 1.7V,then = VIN = Set VOUT+1V VIN Input Voltage 2.0 6.0 V ppm ∆VOUT/ Output Voltage IOUT = 30mA ±100 Temperature Coefficient /°C ∆T −40°C < Topt < 85°C = = ILIM Short Current Limit 40 mA VOUT = 0V CE Pull-down IPD 0.3 0.6 µA Constant Current VCEH CE, ECO Input Voltage “H” 1.0 6.0 V VCEL CE, ECO Input Voltage “L” 0.0 0.4 V Output Noise ”H” (FT Mode) BW = 10Hz to 100kHz 30 en µVrms Output Noise ”L” (LP Mode) 40 BW = 10Hz to 100kHz IREV Reverse Current VOUT>0.5V, 0V < VIN < 6V 0.0 0.1 µA = =
7
R1163x
ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE
Topt = 25°C
Output Voltage VOUT (V) 1.5 VOUT < 1.6 1.6 < VOUT < 1.7 = 1.7 < VOUT < 1.8 = 1.8 < VOUT < 2.0 = 2.0 < VOUT < 2.8 = 2.8 < VOUT < 4.0 = =
< =
Dropout Voltage (V) Condition VDIF(ECO=H) Typ. 0.400 0.380 0.350 0.340 0.290 0.250 Max. 0.680 0.550 0.520 0.490 0.425 0.350 VDIF(ECO=L) Typ. 0.420 0.390 0.370 0.350 0.300 0.250 Max. 0.680 0.550 0.520 0.490 0.425 0.350
IOUT = 150mA
TECHNICAL NOTES
When using these ICs, consider the following points: Phase Compensation In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be sure to use a 0.47µF or more ceramic capacitor COUT. (Test these ICs with as same external components as ones to be used on the PCB.) When a tantalum capacitor is used with this IC, if the equivalent series resistor (ESR) of the capacitor is large, output voltage may be unstable. PCB Layout Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result. Connect a capacitor with as much as 1.0µF capacitor between VDD and GND pin as close as possible. Set external components such as an output capacitor, as close as possible to the ICs and make wiring as short as possible.
TYPICAL APPLICATION
VDD OUT
C1
GND
R1163x Series
C2
IOUT
V
ECO
VOUT
CE
∗External Components Ex. : C1: Ceramic Capacitor 1.0µF C2 : Ceramic Capacitor 0.47µF (Murata GRM40B474K)
8
R1163x
TYPICAL CHARACTERISTICS
Unless otherwise provided, capacitors are ceramic type.
1) Output Voltage vs. Output Current
R1163x151x ECO=H
1.6 1.6
R1163x151x ECO=L
Output Voltage L VOUTL(V)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 Output Current IOUT(mA) 400 VIN=2.5V • 3.5V VIN=2V
Output Voltage H VOUTH(V)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 Output Current IOUT(mA) 400 VIN=2.5V • 3.5V VIN=2V
R1163x281x ECO=H
3.0 3.0
R1163x281x ECO=L
Output Voltage L VOUTL(V)
2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 Output Current IOUT(mA) 400
Output Voltage H VOUTH(V)
2.5 2.0 1.5 1.0 0.5 0.0 0
VIN=3.1V VIN=3.3V VIN=3.8V • 4.8V
VIN=3.1V VIN=3.3V VIN=3.8V • 4.8V
100 200 300 Output Current IOUT(mA)
400
R1163x40x ECO=H
4.5 4.5 VIN=4.3V VIN=4.5V VIN=5V • 6V
R1163x40x ECO=L
Output Voltage L VOUTL(V)
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 Output Current IOUT(mA) 400 VIN=4.3V VIN=5V • 6V VIN=4.5V
Output Voltage H VOUTH(V)
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 Output Current IOUT(mA) 400
9
R1163x
2) Output Voltage vs. Input Voltage
R1163x151x ECO=H
1.6 1.6
R1163x15x ECO=L
Output Voltage L VOUTL(V)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
Output Voltage H VOUTH(V)
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
R1163x28x ECO=H
3.0 3.0
R1163x28x ECO=L
Output Voltage L VOUTL(V)
2.5 2.0 1.5 1.0 0.5 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
Output Voltage H VOUTH(V)
2.5 2.0 1.5 1.0 0.5 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
R1163x40x ECO=H
4.5 4.5
R1163x40x ECO=L
Output Voltage L VOUTL(V)
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
Output Voltage H VOUTH(V)
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 1 IOUT=1mA IOUT=30mA IOUT=50mA 2 3 4 Input Voltage VIN(V) 5 6
10
R1163x
3) Supply Current vs. Input Voltage
R1163x151x ECO=H
80 8
R1163x151x ECO=L
7 6 5 4 3 2 1 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
Supply Current H ISSH(µA)
60 50 40 30 20 10 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
R1163x281x ECO=H
80 8
Supply Current ISS(µA)
70
R1163x281x ECO=L
7 6 5 4 3 2 1 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
Supply Current H ISSH(µA)
60 50 40 30 20 10 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
R1163x401x ECO=H
80 8
Supply Current ISS(µA)
70
R1163x401x ECO=L
7 6 5 4 3 2 1 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
Supply Current H ISSH(µA)
60 50 40 30 20 10 0 0 1 2 3 4 Input Voltage VIN(V) 5 6
Supply Current ISS(µA)
70
11
R1163x
4) Output Voltage vs. Temperature
R1163x151x ECO=H
1.53 1.53
R1163x151x ECO=L
Output Voltage L VOUTL(V)
1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Output Voltage H VOUTH(V)
1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 Temperature Topt(°C) 100
R1163x281x ECO=H
2.83 2.83
R1163x281x ECO=L
Output Voltage L VOUTL(V)
2.82 2.81 2.80 2.79 2.78 2.77 2.76 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Output Voltage H VOUTH(V)
2.82 2.81 2.80 2.79 2.78 2.77 2.76 -50 -25 0 25 50 75 Temperature Topt(°C) 100
R1163x401x ECO=H
4.05 4.06
R1163x401x ECO=L
Output Voltage L VOUTL(V)
4.05 4.04 4.03 4.02 4.01 4.00 3.99 3.98 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Output Voltage H VOUTH(V)
4.04 4.03 4.02 4.01 4.00 3.99 3.98 3.97 -50 -25 0 25 50 75 Temperature Topt(°C) 100
12
R1163x
5) Supply Current vs. Temperature
R1163x151x ECO=H
90 VIN=2.5V 10 9 8 7 6 5 4 3 2 1 0 -50
R1163x151x ECO=L
VIN=2.5V
Supply Current H ISSH(µA)
70 60 50 40 30 20 10 0 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Supply Current ISS(µA)
80
-25
0 25 50 75 Temperature Topt(°C)
100
R1163x281x ECO=H
90 VIN=3.8V 10 9 8 7 6 5 4 3 2 1 0 -50
R1163x281x ECO=L
VIN=3.8V
Supply Current H ISSH(µA)
70 60 50 40 30 20 10 0 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Supply Current ISS(µA)
80
-25
0 25 50 75 Temperature Topt(°C)
100
R1163x401x ECO=H
90 VIN=5.0V 10 9 8 7 6 5 4 3 2 1 0 -50
R1163x401x ECO=L
VIN=5.0V
Supply Current H ISSH(µA)
70 60 50 40 30 20 10 0 -50 -25 0 25 50 75 Temperature Topt(°C) 100
Supply Current ISS(µA)
80
-25
0 25 50 75 Temperature Topt(°C)
100
13
R1163x
6) Standby Current vs. Input Voltage
2.5
Standby Current ISTB(µA)
2.0 1.5 1.0 0.5 0.0
Topt=85°C Topt=25°C Topt=-40°C
0
1
2 3 4 Input Voltage VIN(V)
5
6
7) Reverse Current vs. Output Voltage
VIN=1V 0.020 Topt=85°C 0.018 Topt=25°C 0.016 Topt=-40°C 0.014 0.012 0.010 0.008 0.006 0.004 0.002 0.000 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Output Voltage VOUT(V) 1.2 1.0 VIN=0V Topt=85°C Topt=25°C Topt=-40°C
IREV1(µA)
IREV3(µA)
0.8 0.6 0.4 0.2
0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Output Voltage VOUT(V)
8) Dropout Voltage vs. Output Current
R1163x151x ECO=H
0.5 0.5
R1163x151x ECO=L
Dropout Voltage L VDIF_L(V)
Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage L VDIF_L(V)
0.4 0.3 0.2 0.1 0.0
Topt=85°C Topt=25°C Topt=-40°C
0.4 0.3 0.2 0.1 0.0
0
25 50 75 100 125 Output Current IOUT(mA)
150
0
25 50 75 100 125 Output Current IOUT(mA)
150
14
R1163x
R1163x161x ECO=H
0.5 0.5
R1163x161x ECO=L
Dropout Voltage L VDIF_L(V)
Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.4 0.3 0.2 0.1 0.0
Topt=85°C Topt=25°C Topt=-40°C
0.4 0.3 0.2 0.1 0.0
0
25 50 75 100 125 Output Current IOUT(mA)
150
0
25 50 75 100 125 Output Current IOUT(mA)
150
R1163x171x ECO=H
0.5 0.5
R1163x171x ECO=L
Dropout Voltage L VDIF_L(V)
Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.4 0.3 0.2 0.1 0.0
Topt=85°C Topt=25°C Topt=-40°C
0.4 0.3 0.2 0.1 0.0
0
25 50 75 100 125 Output Current IOUT(mA)
150
0
25 50 75 100 125 Output Current IOUT(mA)
150
R1163x181x ECO=H
0.5 0.5
R1163x181x ECO=L
Dropout Voltage L VDIF_L(V)
Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.4 0.3 0.2 0.1 0.0
Topt=85°C Topt=25°C Topt=-40°C
0.4 0.3 0.2 0.1 0.0
0
25 50 75 100 125 Output Current IOUT(mA)
150
0
25 50 75 100 125 Output Current IOUT(mA)
150
15
R1163x
R1163x211x ECO=H
0.4 0.4
R1163x211x ECO=L
Dropout Voltage L VDIF_L(V)
Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.3 0.2 0.1 0.0
Topt=85°C Topt=25°C Topt=-40°C
0.3 0.2 0.1 0.0
0
25 50 75 100 125 Output Current IOUT(mA)
150
0
25 50 75 100 125 Output Current IOUT(mA)
150
R1163x281x ECO=H
0.30 0.30
R1163x281x ECO=L
Dropout Voltage L VDIF_L(V)
0.25 0.20 0.15 0.10 0.05 0.00 0 25 50 75 100 125 Output Current IOUT(mA) 150 Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.25 0.20 0.15 0.10 0.05 0.00 0
Topt=85°C Topt=25°C Topt=-40°C
25 50 75 100 125 Output Current IOUT(mA)
150
R1163x401x ECO=H
0.30 0.30
R1163x401x ECO=L
Dropout Voltage L VDIF_L(V)
0.25 0.20 0.15 0.10 0.05 0.00 0 25 50 75 100 125 Output Current IOUT(mA) 150 Topt=85°C Topt=25°C Topt=-40°C
Dropout Voltage H VDIF_H(V)
0.25 0.20 0.15 0.10 0.05 0.00 0
Topt=85°C Topt=25°C Topt=-40°C
25 50 75 100 125 Output Current IOUT(mA)
150
16
R1163x
9) Dropout Voltage vs. Set Output Voltage
R1163x ECO=H
0.50 0.50
R1163x ECO=L
Dropout Voltage L VDIF_L(V)
IOUT=10mA IOUT=30mA IOUT=50mA IOUT=100mA IOUT=150mA
Dropout Voltage H VDIF_H(V)
0.40 0.30 0.20 0.10 0.00 1.5
IOUT=10mA IOUT=30mA IOUT=50mA IOUT=100mA IOUT=150mA
0.40 0.30 0.20 0.10 0.00 1.5
2.0 2.5 3.0 3.5 Set Output Voltage VREG(V)
4.0
2.0 2.5 3.0 3.5 Set Output Voltage VREG(V)
4.0
10) Ripple Rejection vs. Input Bias Voltage
R1163x281x ECO=H
90 CIN=none, COUT=0.47µF, IOUT=1mA Ripple=0.2Vp-p 90
R1163x281x ECO=H
CIN=none, COUT=0.47µF, IOUT=1mA Ripple=0.5Vp-p
Ripple Rejection RR(dB)
70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
Ripple Rejection RR(dB)
80
80 70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
R1162x281x ECO=H
90 CIN=none, COUT=0.47µF, IOUT=30mA Ripple=0.2Vp-p 90
R1162x281x ECO=H
CIN=none, COUT=0.47µF, IOUT=30mA Ripple=0.5Vp-p
Ripple Rejection RR(dB)
70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
Ripple Rejection RR(dB)
80
80 70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
17
R1163x
R1163x281x ECO=H
90 CIN=none, COUT=0.47µF, IOUT=50mA Ripple=0.2Vp-p 90
R1163x281x ECO=H
CIN=none, COUT=0.47µF, IOUT=50mA Ripple=0.5Vp-p
Ripple Rejection RR(dB)
70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
Ripple Rejection RR(dB)
80
80 70 60 50 40 30 20 10 0 2.9 f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 Input Voltage VIN(V) 3.3
11) Ripple Rejection vs. Frequency(CIN=none)
R1163x151x ECO=H
80 CIN=none, COUT=0.47µF, VIN=2.5VDC+0.2Vp-p 70
R1163x151x ECO=L
CIN=none, COUT=0.47µF, VIN=2.5VDC+0.2Vp-p IOUT=1mA IOUT=30mA IOUT=50mA
Ripple Rejection RR_H(dB)
70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 Frequency f(kHz) 100
Ripple Rejection RR_L(dB)
60 50 40 30 20 10 0 0.1
1 10 Frequency f(kHz)
100
R1163x281x ECO=H
80 CIN=none, COUT=0.47µF, VIN=3.8VDC+0.2Vp-p 70
R1163x281x ECO=L
CIN=none, COUT=0.47µF, VIN=3.8VDC+0.2Vp-p IOUT=1mA IOUT=30mA IOUT=50mA
Ripple Rejection RR_H(dB)
70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 Frequency f(kHz) 100
Ripple Rejection RR_L(dB)
60 50 40 30 20 10 0 0.1
1 10 Frequency f(kHz)
100
18
R1163x
R1163x401x ECO=H
80 CIN=none, COUT=0.47µF, VIN=5.0VDC+0.2Vp-p 70
R1163x401x ECO=L
CIN=none, COUT=0.47µF, VIN=5.0VDC+0.2Vp-p IOUT=1mA IOUT=30mA IOUT=50mA
Ripple Rejection RR_H(dB)
70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 Frequency f(kHz) 100
Ripple Rejection RR_L(dB)
60 50 40 30 20 10 0 0.1
1 10 Frequency f(kHz)
100
12) Input Transient Response
R1163x151x ECO=H
1.58 CIN=none, COUT=0.47µF IOUT=30mA 4 3.5
R1163x151x ECO=L
CIN=none, COUT=0.47µF IOUT=10mA 4
Output Voltage VOUT(V)
Output Voltage VOUT(V)
Input Voltage VIN(V)
Input Voltage
Input Voltage
1.54 1.52 1.50 1.48 1.46 Output Voltage
2 1 0 -1
2.5 2.0 1.5 1.0 Output Voltage
2 1 0 -1
-2 0 10 20 30 40 50 60 70 80 90 100 Time t(µs)
0.5 -2 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Time t(ms)
R1163x151x ECO=L
3.5 CIN=none, COUT=1µF IOUT=10mA 4 2.88
R1163x281x ECO=H
CIN=none, COUT=1µF IOUT=30mA 6
Output Voltage VOUT(V)
Output Voltage VOUT(V)
Input Voltage VIN(V)
Input Voltage
2.5 2.0 1.5 1.0 Output Voltage
2 1 0 -1
2.84 2.82 2.80 2.78 2.76
Input Voltage
4 3 2
Output Voltage
1
0.5 -2 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Time t(ms)
0 0 10 20 30 40 50 60 70 80 90 100 Time t(µs)
Input Voltage VIN(V)
3.0
3
2.86
5
Input Voltage VIN(V)
1.56
3
3.0
3
19
R1163x
R1163x281x ECO=H
5.0 CIN=none, COUT=1µF IOUT=10mA 6
Output Voltage VOUT(V)
4.0 3.5 3.0 2.5
Input Voltage
4 3 2
Output Voltage
1
2.0 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Time t(ms)
13) Load Transient Response
R1163x151x ECO=H
1.9 VIN=2.5V, CIN=1µF COUT=0.47µF 150 1.9
Input Voltage VIN(V)
4.5
5
R1163x151x ECO=H
VIN=2.5V, CIN=1µF COUT=1.0µF 150 100 Output Current 50 0 -50 Output Voltage 0 2 4 6 8 10 12 14 16 18 20 Time t(µs) -100 -150
Output Current IOUT(mA)
Output Voltage VOUT(V)
1.7 1.6 1.5 1.4 1.3 0 2 4
Output Current
50 0 -50
Output Voltage VOUT(V)
1.8
100
1.8 1.7 1.6 1.5 1.4 1.3
Output Voltage 6 8 10 12 14 16 18 20 Time t(µs)
-100 -150
R1163x151x ECO=H
1.9 VIN=2.5V, CIN=1µF COUT=0.47µF 60 1.9
R1163x151x ECO=H
VIN=2.5V, CIN=1µF COUT=1.0µF 60 30 Output Current 0 -30 -60 Output Voltage 0 2 4 6 8 10 12 14 16 18 20 Time t(µs) -90 -120
Output Current IOUT(mA)
Output Voltage VOUT(V)
1.7 1.6 1.5 1.4 1.3 0 2 4
Output Current
0 -30 -60
Output Voltage VOUT(V)
1.8
30
1.8 1.7 1.6 1.5 1.4 1.3
Output Voltage 6 8 10 12 14 16 18 20 Time t(µs)
-90 -120
20
Output Current IOUT(mA)
Output Current IOUT(mA)
R1163x
R1163x151x ECO=L
1.9 VIN=2.5V, CIN=1µF COUT=0.47µF 20 1.9
R1163x151x ECO=L
VIN=3.8V, CIN=1µF COUT=1µF 20 10 Output Current 0 -10 -20 Output Voltage -30
Output Current IOUT(mA)
Output Voltage VOUT(V)
1.7 1.6 1.5 1.4
Output Current
0 -10 -20
Output Voltage VOUT(V)
1.8
10
1.8 1.7 1.6 1.5 1.4
Output Voltage
-30
1.3 -40 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Time t(ms)
1.3 -40 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Time t(ms)
R1163x281x ECO=H
3.2 VIN=3.8V, CIN=1µF COUT=0.47µF 150 3.2
R1163x281x ECO=H
VIN=3.8V, CIN=1µF COUT=1µF 150 100 Output Current 50 0 -50 Output Voltage 0 2 4 6 8 10 12 14 16 18 20 Time t(µs) -100 -150
Output Current IOUT(mA)
Output Voltage VOUT(V)
3.0 2.9 2.8 2.7 2.6 0 2 4
Output Current
50 0 -50
Output Voltage VOUT(V)
3.1
100
3.1 3.0 2.9 2.8 2.7 2.6
Output Voltage 6 8 10 12 14 16 18 20 Time t(µs)
-100 -150
R1163x281x ECO=H
3.2 VIN=3.8V, CIN=1µF COUT=0.47µF 60 3.2
R1163x281x ECO=H
VIN=3.8V, CIN=1µF COUT=1µF 60 30 Output Current 0 -30 -60 Output Voltage 0 2 4 6 8 10 12 14 16 18 20 Time t(µs) -90 -120
Output Current IOUT(mA)
Output Voltage VOUT(V)
3.0 2.9 2.8 2.7 2.6 0 2 4
Output Current
0 -30 -60
Output Voltage VOUT(V)
3.1
30
3.1 3.0 2.9 2.8 2.7 2.6
Output Voltage 6 8 10 12 14 16 18 20 Time t(µs)
-90 -120
Output Current IOUT(mA)
Output Current IOUT(mA)
Output Current IOUT(mA)
21
R1163x
R1163x281x ECO=L
3.6 VIN=3.8V, CIN=1µF COUT=0.47µF 20 3.6
R1163x281x ECO=L
VIN=3.8V, CIN=1µF COUT=1µF 20 10 Output Current 0 -10 -20 Output Voltage -30
Output Current IOUT(mA)
Output Voltage VOUT(V)
3.2 3.0 2.8 2.6
Output Current
0 -10 -20
Output Voltage VOUT(V)
3.4
10
3.4 3.2 3.0 2.8 2.6
Output Voltage
-30
2.4 -40 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Time t(ms)
2.4 -40 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Time t(ms)
14) Turn on speed with CE pin
R1163x151x ECO=H
3 VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=0mA 3.5 3
R1163x151x ECO=L
VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=0mA 3.5 2.5 2.0 1.5 Output Voltage 1.0 0.5 0.0 0 20 40 60 Time t(ms) -0.5 80 100 120
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
1 0 -1 -2 -3 -4 -5 -8 -4 0
CE Input Voltage
2.5 2.0 1.5 1.0 0.5 0.0 -0.5
1 0 -1 -2 -3 -4 -5 -40 -20
CE Input Voltage
Output Voltage
4
8 12 16 20 24 28 32 Time t(µs)
R1163x151x ECO=H
3 VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=30mA 3.5 3
R1163x151x ECO=L
VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=30mA 3.5 2.5 2.0 1.5 Output Voltage 1.0 0.5 0.0
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
1 0 -1 -2 -3 -4 -5 -8 -4 0
CE Input Voltage
2.5 2.0 1.5 1.0
1 0 -1 -2 -3 -4
CE Input Voltage
Output Voltage
0.5 0.0 -0.5
4
8 12 16 20 24 28 32 Time t(µs)
-0.5 -5 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Time t(ms)
22
Output Voltage VOUT(V)
2
3.0
2
3.0
Output Voltage VOUT(V)
2
3.0
2
3.0
Output Current IOUT(mA)
R1163x
R1163x151x ECO=H
3 VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=150mA 3.5 3
R1163x151x ECO=L
VIN=2.5V, CIN=1µF COUT=0.47µF IOUT=150mA 3.5 2.5 2.0 1.5 Output Voltage 1.0 0.5 0.0
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
1 0 -1 -2 -3 -4 -5 -8 -4 0
CE Input Voltage
2.5 2.0 1.5 1.0 0.5 0.0 -0.5
1 0 -1 -2 -3 -4
CE Input Voltage
Output Voltage
4
8 12 16 20 24 28 32 Time t(µs)
-0.5 -5 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Time t(ms)
R1163x281x ECO=H
6 VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=0mA 7 6
R1163x281x ECO=L
VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=0mA 7 5 4 3 Output Voltage 2 1 0
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
CE Input Voltage
5 4 3 2 1 0
2 0 -2 -4 -6 -8
CE Input Voltage
Output Voltage
-1 -10 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
-1 -10 -20 -10 0 10 20 30 40 50 60 70 80 Time t(ms)
R1163x281x ECO=H
6 VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=30mA 7 6
R1163x281x ECO=L
VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=30mA 7 5 4 3 Output Voltage 2 1 0 -1 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
CE Input Voltage
5 4 3 2 1 0
2 0 -2 -4 -6 -8
CE Input Voltage
Output Voltage
-1 -10 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
-10 -0.1 -0
Output Voltage VOUT(V)
4
6
4
6
Output Voltage VOUT(V)
4
6
4
6
Output Voltage VOUT(V)
2
3.0
2
3.0
23
R1163x
R1163x281x ECO=H
6 VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=150mA 7 6
R1163x281x ECO=L
VIN=3.8V, CIN=1µF COUT=0.47µF IOUT=150mA 7 5 4 3 Output Voltage 2 1 0 -1 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
CE Input Voltage
5 4 3 2 1 0
2 0 -2 -4 -6 -8
CE Input Voltage
Output Voltage
-1 -10 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
-10 -0.1 -0
R1163x401x ECO=H
6 VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=0mA CE Input Voltage 8 6
R1163x401x ECO=L
VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=0mA CE Input Voltage 8 6 5 4 3 Output Voltage 2 1 0 -1 -8 -4 0 4 8 12 16 20 24 28 32 Time t(ms)
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
6 5 4 3
2 0 -2 -4 -6 -8
Output Voltage
2 1 0
-10
-10 -12
-12 -1 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
R1163x401x ECO=H
6 VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=30mA CE Input Voltage 8 6
R1163x401x ECO=L
VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=30mA CE Input Voltage 8 6 5 4 Output Voltage 3 2 1 0 -1 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
6 5 4 3
2 0 -2 -4 -6 -8
Output Voltage
2 1 0
-10
-10 -12 -0.1 -0
-12 -1 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
24
Output Voltage VOUT(V)
4
7
4
7
Output Voltage VOUT(V)
4
7
4
7
Output Voltage VOUT(V)
4
6
4
6
R1163x
R1163x401x ECO=H
6 VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=150mA CE Input Voltage 8 6
R1163x401x ECO=L
VIN=5.0V, CIN=1µF COUT=0.47µF IOUT=150mA CE Input Voltage 8 6 5 4 3 Output Voltage 2 1 0 -1 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
2 0 -2 -4 -6 -8
6 5 4 3
2 0 -2 -4 -6 -8
Output Voltage
2 1 0
-10
-10 -12 -0.1 -0
-12 -1 -20 -10 0 10 20 30 40 50 60 70 80 Time t(µs)
15) Turn off speed with CE pin
R1163x151xD
3 VIN=2.5V, CIN=1µF COUT=0.47µF CE Input Voltage 3.5 4
R1163x281xD
VIN=3.8V, CIN=1µF COUT=0.47µF CE Input Voltage 8.0 6.0 5.0 4.0 IOUT=0mA IOUT=30mA IOUT=150mA 3.0 2.0 1.0
CE Input Voltage VCE(V)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
1 0 -1 -2 -3 -4
2.5 2.0 1.5 1.0 0.5 0.0
2 1 0 -1 -2 -3 -4
IOUT=0mA IOUT=30mA IOUT=150mA
Output Voltage -5 -0.5 -0.1 -0 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
0.0 Output Voltage -5 -1.0 -0.1 -0 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
R1163x401xD
VIN=5.0V, CIN=1µF COUT=0.47µF 6 11 5 10 4 9 CE Input Voltage 3 8 2 7 1 6 0 5 4 -1 IOUT=0mA -2 3 IOUT=30mA -3 2 IOUT=150mA -4 1 0 -5 -6 Output Voltage -1 -0.1 -0 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32 Time t(ms)
CE Input Voltage VCE(V)
Output Voltage VOUT(V)
Output Voltage VOUT(V)
2
3.0
3
7.0
Output Voltage VOUT(V)
4
7
4
7
25
R1163x
16) Output Voltage at Mode alternative point
R1163x151B/D
ECO Input Voltage VECO(V)
R1163x281B/D
3 2 1 0 -1 4 3 2 1 0 2.82 2.80
Output Voltage VOUT(V) ECO Input Voltage VECO(V)
ECO Input Voltage VECO(V)
VIN=2.5V, CIN=Ceramic 1.0µF, COUT=Ceramic 0.47µF
VIN=3.8V, CIN=Ceramic 1.0µF, COUT=Ceramic 0.47µF
1.52 1.50
Output Voltage VOUT(V)
IOUT=1mA
IOUT=1mA
-1
1.48 1.52 1.50 1.48 1.52 1.50 1.48 1.52 1.50 1.48 1.52 1.50 1.48 -0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Time t(ms)
1.56 3 1 0 -1 IOUT=0mA -2 -3 -4
2.78 2.82 2.80 2.78 2.82 2.80 2.78 IOUT=50mA IOUT=10mA
IOUT=10mA
IOUT=50mA
IOUT=100mA
2.82 2.80 2.78
IOUT=100mA
IOUT=150mA
2.82 2.80
IOUT=150mA
2.78 -0.1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Time t(ms)
2.86 4 3 2 1 0 IOUT=0mA -1 -2 -3
Output Voltage VOUT(V)
1.54 1.53 1.52 1.51 1.50 1.49
Output Voltage VOUT(V)
1.55
2
ECO Input Voltage VECO(V)
2.85 2.84 2.83 2.82 2.81 2.80 2.79
-5 1.48 -10 0 10 20 30 40 50 60 70 80 90 Time t(ms)
-4 2.78 -10 0 10 20 30 40 50 60 70 80 90 Time t(ms)
26
R1163x
TECHNICAL NOTES
When using these ICs, consider the following points: In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be sure to use a capacitor COUT with good frequency characteristics and ESR (Equivalent Series Resistance) in the range described as follows: The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph.
(1) Frequency band: 10Hz to 2MHz
R1163x151x ECO=H
100 10 VIN=2.0V to 6.0V, CIN=1µF COUT=0.47µF Topt=85°C Topt=25°C Topt=-40°C 100 10
R1163x151x ECO=L
VIN=2.0V to 6.0V, CIN=1µF COUT=0.47µF
ESR(Ω)
ESR(Ω)
0 20 40 60 80 100 120 140 Load Current IOUT(mA)
1 0.1 0.01
1 0.1 0.01 0 20 40 60 80 100 120 140 Load Current IOUT(mA)
R1163x281x ECO=H
100 10 VIN=3.1V to 6.0V, CIN=1µF COUT=0.47µF Topt=85°C Topt=25°C Topt=-40°C 100 10
R1163x281x ECO=L
VIN=3.1V to 6.0V, CIN=1µF COUT=0.47µF
ESR(Ω)
ESR(Ω)
0 20 40 60 80 100 120 140 Load Current IOUT(mA)
1 0.1 0.01
1 0.1 0.01 0 20 40 60 80 100 120 140 Load Current IOUT(mA)
27
PACKAGE INFORMATION
PE-SOT-23-5-0510
•
SOT-23-5 (SC-74A)
2.9±0.2 1.9±0.2 (0.95) (0.95)
Unit: mm
PACKAGE DIMENSIONS
+0.2 1.1 −0.1 0.8±0.1 4
5
+0.2 1.6 − 0.1
2.8±0.3
0 to 0.1
1
2 0.4±0.1
3
TAPING SPECIFICATION
0.3±0.1 +0.1 φ1.5 0 4.0±0.1 2.0±0.05 1.75±0.1 3.5±0.05 4.0±0.1 ∅1.1±0.1 8.0±0.3
3.3 2.0MAX.
3.2
TR User Direction of Feed
TAPING REEL DIMENSIONS
(1reel=3000pcs)
11.4±1.0 9.0±0.3
21±0.8
∅60 +1 0 ∅180 0 1.5 −
2±0.5
∅ 13±0.2
0.2 MIN.
+0.1 0.15 −0.05
PACKAGE INFORMATION
PE-SOT-23-5-0510
POWER DISSIPATION (SOT-23-5)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: (Power Dissipation (SOT-23-5) is substitution of SOT-23-6.) Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result
(Topt=25°C,Tjmax=125°C)
Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.5mm × 44pcs
Standard Land Pattern Power Dissipation Thermal Resistance
600
Free Air 250mW 400°C/W
420mW θja=(125−25°C)/0.42W=263°C/W
Power Dissipation PD(mW)
500 420 400 300 200 100 0 0 25
On Board
40
Free Air 250
40
50 75 85 100 Ambient Temperature (°C)
125
150
Power Dissipation
Measurement Board Pattern IC Mount Area Unit : mm
RECOMMENDED LAND PATTERN
0.7 MAX. 1.0
2.4
0.95 0.95 1.9
(Unit: mm)
PACKAGE INFORMATION
PE-SON-6-0510
•
SON-6
Unit: mm
PACKAGE DIMENSIONS
6 4
2.6±0.2 3.0±0.15
0.85MAX.
1
0.13±0.05
Bottom View
0.1 0.5 0.2±0.1
Attention: Tab suspension leads in the parts have VDD or GND level.(They are connected to the reverse side of this IC.) Refer to PIN DISCRIPTION. Do not connect to other wires or land patterns.
TAPING SPECIFICATION
0.2±0.1 ∅ 1.5+0.1 0 4.0±0.1 2.0±0.05
(0.3)
3
1.34
(0.3)
1.6±0.2
3.5±0.05
1.75±0.1 8.0±0.3
1.9 1.7MAX. 4.0±0.1 ∅1.1±0.1
TR User Direction of Feed
TAPING REEL DIMENSIONS
(1reel=3000pcs)
11.4±1.0 9.0±0.3
21±0.8
0 180 −1.5
2±0.5
13±0.2 +1 60 0
3.2
PACKAGE INFORMATION
PE-SON-6-0510
POWER DISSIPATION (SON-6)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result
(Topt=25°C,Tjmax=125°C)
Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.5mm × 44pcs
Standard Land Pattern Power Dissipation Thermal Resistance
600
Free Air 250mW -
500mW θja=(125−25°C)/0.5W=200°C/W
Power Dissipation PD(mW)
500 400 300 200 100 0 0 25 250
On Board
40
Free Air
50 75 85 100 Ambient Temperature (°C)
125
150
Power Dissipation
40
Measurement Board Pattern IC Mount Area (Unit : mm)
RECOMMENDED LAND PATTERN
0.25 0.5
1.05 0.75
(Unit: mm)
PACKAGE INFORMATION
PE-PLP1616-6-0606
•
PLP1616-6
Unit: mm
PACKAGE DIMENSIONS
0.05 M AB A 1.60 B 4 0.10±0.05 1.00±0.05 0.5 6
×4
0.05
1.60
0.25±0.05
0.15±0.05
INDEX
0.6MAX.
3 0.20±0.05 0.10±0.05
1
4-
0.90±0.05
C
0.
10
0.20±0.05
Bottom View
Attention: Tabs or Tab suspension leads in the parts have VDD or GND level.(They are connected to the reverse side of this IC.) Refer to PIN DISCRIPTION. Do not connect to other wires or land patterns.
S
0.05 S
TAPING SPECIFICATION
0.2±0.1 1.5 +0.1 0 4.0±0.1 2.0±0.05
3.5±0.05 1.9
0.6±0.1 1.9 1.2MAX. 4.0±0.1
1.75±0.1 8.0±0.3
TR
User Direction of Feed
TAPING REEL DIMENSIONS
(1reel=5000pcs)
11.4±1.0 9.0±0.3
21±0.8
∅60 +1 0 0 ∅180 −1.5
2±0.5
∅13±0.2
PACKAGE INFORMATION
PE-PLP1616-6-0606
POWER DISSIPATION (PLP1616-6)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: (PLP1616-6 is a reference value calculated from the PLP1820-6 package.) Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result
(Topt=25°C,Tjmax=125°C)
Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.54mm × 30pcs
Standard Land Pattern Power Dissipation Thermal Resistance
600 560
560mW θja=(125−25°C)/0.56W=179°C/W
40 On Board
Power Dissipation PD(mW)
500 400 300 200 100 0 0 25
50 75 85 100 Ambient Temperature (°C)
125
150
40
Measurement Board Pattern
Power Dissipation
IC Mount Area Unit : mm
RECOMMENDED LAND PATTERN
0.45 0.35
0.50 0.25
0.90
0.125 0.225
0.35
0.90
2.00
C0 0 .1
(Unit: mm)
MARK INFORMATION
ME-R1163N-0409
R1163N SERIES MARK SPECIFICATION • SOT-23-5 (SC-74A)
1 4
1 2 3 4 5
, ,
2 5
,
3
: Product Code (refer to Part Number vs. Product Code) : Lot Number
•
Part Number vs. Product Code
Product Code
1 2 3
Part Number R1163N151B R1163N161B R1163N171B R1163N181B R1163N191B R1163N201B R1163N211B R1163N221B R1163N231B R1163N241B R1163N251B R1163N261B R1163N271B R1163N281B R1163N291B R1163N301B R1163N311B R1163N321B R1163N331B R1163N341B R1163N351B R1163N361B R1163N371B R1163N381B R1163N391B R1163N401B R1163N181B5 R1163N281B5
Part Number R1163N151D R1163N161D R1163N171D R1163N181D R1163N191D R1163N201D R1163N211D R1163N221D R1163N231D R1163N241D R1163N251D R1163N261D R1163N271D R1163N281D R1163N291D R1163N301D R1163N311D R1163N321D R1163N331D R1163N341D R1163N351D R1163N361D R1163N371D R1163N381D R1163N391D R1163N401D R1163N181D5 R1163N281D5
Product Code
1 2 3
V V V V V V V V V V V V V V V V V V V V V V V V V V V V
1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
W W W W W W W W W W W W W W W W W W W W W W W W W W W W
1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
MARK INFORMATION
ME-R1163D-0409
R1163D SERIES MARK SPECIFICATION • SON-6
1
, ,
2 4
: Product Code (refer to Part Number vs. Product Code) : Lot Number
1
2
3
3
4
•
Part Number vs. Product Code
Product Code
1 2
Part Number R1163D151B R1163D161B R1163D171B R1163D181B R1163D191B R1163D201B R1163D211B R1163D221B R1163D231B R1163D241B R1163D251B R1163D261B R1163D271B R1163D281B R1163D291B R1163D301B R1163D311B R1163D321B R1163D331B R1163D341B R1163D351B R1163D361B R1163D371B R1163D381B R1163D391B R1163D401B R1163D181B5 R1163D281B5
Part Number R1163D151D R1163D161D R1163D171D R1163D181D R1163D191D R1163D201D R1163D211D R1163D221D R1163D231D R1163D241D R1163D251D R1163D261D R1163D271D R1163D281D R1163D291D R1163D301D R1163D311D R1163D321D R1163D331D R1163D341D R1163D351D R1163D361D R1163D371D R1163D381D R1163D391D R1163D401D R1163D181D5 R1163D281D5
Product Code
1 2
S S S S S T T T T T T T T T T U U U U U U U U U U V V V
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
W W W W W X X X X X X X X X X Y Y Y Y Y Y Y Y Y Y Z Z Z
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
MARK INFORMATION
ME-R1163K-0601
R1163K SERIES MARK SPECIFICATION • PLP1616-6
1 5
1 2 3
~4 ,
6
: Product Code (refer to Part Number vs. Product Code) : Lot Number
4
5
6
•
Part Number vs. Product Code
Product Code
1 2 3 4
Part Number R1163K151B R1163K161B R1163K171B R1163K181B R1163K191B R1163K201B R1163K211B R1163K221B R1163K231B R1163K241B R1163K251B R1163K261B R1163K271B R1163K281B R1163K291B R1163K301B R1163K311B R1163K321B R1163K331B R1163K341B R1163K351B R1163K361B R1163K371B R1163K381B R1163K391B R1163K401B
Part Number R1163K151D R1163K161D R1163K171D R1163K181D R1163K191D R1163K201D R1163K211D R1163K221D R1163K231D R1163K241D R1163K251D R1163K261D R1163K271D R1163K281D R1163K291D R1163K301D R1163K311D R1163K321D R1163K331D R1163K341D R1163K351D R1163K361D R1163K371D R1163K381D R1163K391D R1163K401D
Product Code
1 2 3 4
Part Number R1163K151E R1163K161E R1163K171E R1163K181E R1163K191E R1163K201E R1163K211E R1163K221E R1163K231E R1163K241E R1163K251E R1163K261E R1163K271E R1163K281E R1163K291E R1163K301E R1163K311E R1163K321E R1163K331E R1163K341E R1163K351E R1163K361E R1163K371E R1163K381E R1163K391E R1163K401E
Product Code
1 2 3 4
M M M M M M M M M M M M M M M M M M M M M M M M M
1 1 1 1 1 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 1 2
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 8 8
B B B B B B B B B B B B B B B B B B B B B B B B B B 5 5
N1 N1 N1 N1 N1 N2 N2 N2 N N N N N N N N N N N N N N N N N N 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 1 2
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 8 8
D D D D D D D D D D D D D D D D D D D D D D D D D D 5 5
P P P P P P P P P P P P P P P P P P P P P P P P P P
1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 1 2
5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 8 8
E E E E E E E E E E E E E E E E E E E E E E E E E E 5 5
M2
R1163K181B5 M R1163K281B5 M
R1163K181D5 N R1163K281D5 N
R1163K181E5 P R1163K281E5 P
工商网监
湘ICP备2023018690号
