R1180N331B

R1180x SERIES 150mA LDO REGULATOR NO.EA-105-0606 OUTLINE The R1180x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, and low ON-resistance. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit which prevents the destruction by excess current, and so on. The output voltage of these ICs is fixed with high accuracy. B version has a chip enable pin, therefore ultra-low consumption current standby mode can be realized with the pin. Since the packages for these ICs are SOT-23-5 (R1180N Series), SC-82AB (R1180Q Series), and SON1612-6 (R1180D Series), therefore high density mounting of the ICs on boards is possible. FEATURES • • • • • • • Low Supply Current ..........................................Typ. 1µA(Except the current through CE pull-down circuit) Standby Mode ...................................................Typ. 0.1µA Low Dropout Voltage.........................................Typ. 0.25V (IOUT=150mA 3.0V Output type) Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C Good Line Regulation .......................................Typ. 0.05%/V High Output Voltage Accuracy .......................... ±2.0% Small Packages ..............................................SOT-23-5 (R1180N), SC-82AB (R1180Q), SON1612-6 (R1180D) • Output Voltage ..................................................1.2V to 3.6V • Built-in Fold Back Protection Circuit .................Typ. 40mA (Current at short mode) • Ceramic capacitors are recommended to be used with this IC 0.1µF APPLICATIONS • Stable voltage reference. • Power source for electrical appliances such as cameras, VCRs and camcorders. • Power source for battery-powered equipment. 1 R1180x BLOCK DIAGRAMS R1180xxx1B VDD VOUT VDD R1180xxx1C VOUT Vref Vref Current Limit CE GND Current Limit GND SELECTION GUIDE The output voltage, version, and the taping type for the ICs can be selected at the user's request. The selection can be made with designating the part number as shown below: R1180xxx1x-TR-x ←Part Number ↑↑ ab Code a ↑ c ↑↑ de Contents Designation of Package Type : N: SOT-23-5 (Mini mold) Q: SC-82AB (Super-mini mold) D: SON1612-6 Setting Output Voltage (VOUT) : Stepwise setting with a step of 0.1V in the range of 1.2V to 3.6V is possible. Designation of Active Type : B: active high type C: without chip enable circuit Designation of Taping Type : Ex. TR (refer to Taping Specifications; TR type is the standard direction.) Designation of composition of pin plating: -F: Lead free plating (SOT-23-5,SC-82AB,SON1612-6) b c d e 2 R1180x PIN CONFIGURATION SOT-23-5 5 4 4 SC-82AB 3 6 SON1612-6 5 4 (Mark side) (mark side) 1 2 3 1 2 1 2 3 PIN DESCRIPTIONS • SOT-23-5 (R1180N) Pin No 1 2 3 4 5 Symbol VDD GND CE or NC NC VOUT Input Pin Ground Pin Chip Enable Pin or No Connection No Connection Output pin Pin Description • SC-82AB (R1180Q) Pin No 1 2 3 4 Symbol CE or NC GND VOUT VDD Ground Pin Output pin Input Pin Pin Description Chip Enable Pin or No Connection • SON1612-6 (R1180D) Pin No 1 2 3 4 5 6 Symbol VDD GND VOUT NC GND CE or NC Input Pin Ground Pin Output pin No Connection Ground Pin Chip Enable Pin or No Connection Pin Description 3 R1180x ABSOLUTE MAXIMUM RATINGS Symbol VIN VCE VOUT IOUT Input Voltage Input Voltage(CE Pin) Output Voltage Output Current Power Dissipation (SOT23-5) * Power Dissipation (SC82-AB)* Topt Tstg ) 1 1 1 Item Rating 6.5 6.5 −0.3 to VIN+0.3 180 420 380 500 −40 to 85 −55 to 125 Unit V V V mA Power Dissipation (SON1612-6) * Operating Temperature Range Storage Temperature Range °C °C ∗1 For Power Dissipation, please refer to PACKAGE INFORMATION to be described. 4 R1180x ELECTRICAL CHARACTERISTICS • R1180xxx1B/C Topt=25°C Symbol VOUT IOUT ∆VOUT/∆IOUT VDIF ISS Istandby ∆VOUT/∆VIN VIN ∆VOUT/∆T Ilim IPD VCEH VCEL Item Output Voltage Output Current Load Regulation Dropout Voltage Supply Current Supply Current (Standby) Line Regulation Input Voltage Output Voltage Temperature Coefficient Short Current Limit CE Pull-down Constant Current CE Input Voltage “H” CE Input Voltage “L” Conditions VIN=Set VOUT+1V 1µA < IOUT < 30mA = = VIN−VOUT=1.0V Min. ×0.980 150 Typ. Max. ×1.020 Unit V mA VIN=Set VOUT+1V 20 40 mV 1µA < IOUT < 150mA = = Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE VIN=Set VOUT+1V, IOUT=0mA VIN=Set VOUT+1V VCE=GND (B version) Set VOUT+0.5V IOUT=30mA IOUT=30mA −40°C < Topt = VOUT=0V (R1180xxx1B) (R1180xxx1B) (R1180xxx1B) 1.2 0.0 < = 1.0 0.1 1.5 1.0 0.20 6.0 µA µA %/V V ppm /°C mA µA VIN < = 6.0V 1.7 0.05 < = 85 ° C ±100 40 0.35 6.0 0.3 V V • ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE Topt = 25°C Output Voltage VOUT (V) 1.2 1.3 1.4 1.5 1.7 1.9 2.1 2.8 < = < = < = < = < = < = < = < = Dropout Voltage VDIF (V) Condition Typ. 0.85 0.75 0.65 IOUT = 150mA 0.60 0.50 0.40 0.35 0.25 Max. 1.20 1.10 1.00 0.90 0.75 0.65 0.55 0.40 VOUT < 1.3 VOUT < 1.4 VOUT < 1.5 VOUT < 1.7 VOUT < 1.9 VOUT < 2.1 VOUT < 2.8 VOUT < = 3.6 5 R1180x TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current (Topt=25°C) R1180x121x 1.4 3.0 R1180x281x 1.2 Output Voltage VOUT[V] Output Voltage VOUT[V] 1.0 0.8 0.6 0.4 0.2 0.0 0 VIN=2.0V VIN=2.2V VIN=2.5V VIN=3.5V 2.5 VIN=3.1V 2.0 1.5 1.0 0.5 0.0 VIN=3.3V VIN=3.8V 100 200 300 400 500 0 100 Output Current IOUT[mA] 200 300 400 Output Current IOUT[mA] 500 R1180x361x 4.0 Output Voltage VOUT[V] 3.0 VIN=3.9V 2.0 VIN=4.6V 1.0 0.0 0 100 200 300 400 500 Output Current IOUT[mA] 2) Output Voltage vs. Input Voltage (Topt=25°C) R1180x121x 1.30 1.25 2.9 2.8 Output Voltage VOUT[V] R1180x281x Output Voltage VOUT[V] 1.20 1.15 1.10 1.05 1.00 0.95 0.90 0.85 0.80 1 2 3 4 5 6 Input Voltage VIN[V] 1mA 30mA 50mA 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1 2 3 4 5 6 Input Voltage VIN[V] 1mA 30mA 50mA 6 R1180x R1180x361x 3.7 3.6 Output Voltage VOUT[V] 3.5 3.4 3.3 3.2 3.1 3.0 1 2 3 4 Input Voltage VIN[V] 5 6 1mA 30mA 50mA 3) Dropout Voltage vs. Output Current R1180x121x 0.40 85 R1180x281x 0.35 85 25 −40 Dropout Voltage VDIF(V) Dropout Voltage VDIF(V) 25 −40 0.30 0.25 0.20 0.15 0.10 0.05 0 25 50 75 100 125 150 0.00 0 25 50 75 100 Output Current IOUT(mA) 125 150 Output Current IOUT(mA) R1180x361x 0.40 0.35 Dropout Voltage VDIF(V) 85 25 −40 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 25 50 75 100 125 150 Output Current IOUT(mA) 7 R1180x 4) Output Voltage vs. Temperature (IOUT=30mA) R1180x121x (VIN=2.2V) 1.24 1.23 R1180x281x (VIN=3.8V) 2.86 2.84 Output Voltage VOUT[V] 1.22 1.21 1.20 1.19 1.18 1.17 1.16 −40 −15 10 35 ] 60 85 Temperature Topt[ Output Voltage VOUT[V] 2.82 2.80 2.78 2.76 2.74 −40 −15 10 35 Temperature Topt[ 60 ] 85 R1180x361x (VIN=4.6V) 3.68 3.66 Output Voltage VOUT[V] 3.64 3.62 3.60 3.58 3.56 3.54 3.52 −40 −15 10 35 Temperature Topt[ ] 60 85 5) Supply Current vs. Input Voltage (Topt=25°C) R1180x121x 1.2 1.0 1.2 1.0 R1180x281x Supply Current ISS[µA] Supply Current ISS[µA] 0 1 2 3 4 5 6 0.8 0.6 0.4 0.2 0.0 Input Voltage VIN[V] 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 6 Input Voltage VIN[V] 8 R1180x R1180x361x 1.2 1.0 Supply Current ISS[µA] 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 6 Input Voltage VIN[V] 6) Supply Current vs. Temperature R1180x121x(VIN=2.2V) 1.4 1.2 Supply Current ISS[µA] R1180x281x(VIN=3.8V) 1.4 1.2 Supply Current ISS[µA] 1.0 0.8 0.6 0.4 0.2 0.0 −40 −15 10 35 60 85 1.0 0.8 0.6 0.4 0.2 0.0 −50 −25 0 25 50 ] 75 100 Temperature Topt[ ] Temperature Topt[ R1180x361x(VIN=4.6V) 1.4 1.2 Supply Current ISS[µA] 1.0 0.8 0.6 0.4 0.2 0.0 −50 −25 0 25 50 ] 75 100 Temperature Topt[ 9 R1180x 7) Dropout Voltage vs. Set Output Voltage (Topt=25°C) 0.9 0.8 Dropout Voltage VDIF[V] 10mA 30mA 50mA 150mA 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1 2 3 Set Output Voltage Vreg[V] 4 8) Ripple Rejection vs. Frequency (CIN=none) R1180x121x 70 60 Ripple Rejection RR[dB] VIN=2.4VDC+0.5p-p COUT=Ceramic0.1µF R1180x121x 70 60 VIN=2.4VDC+0.5p-p COUT=Ceramic1µF 50 40 30 20 10 0 0.1 1 10 Frequency f[kHz] 100 IOUT=1mA IOUT=50mA Ripple Rejection RR[dB] 50 40 30 20 10 0 0.1 1 10 Frequency f[kHz] 100 IOUT=1mA IOUT=50mA IOUT=30mA IOUT=30mA R1180x281x 70 60 VIN=3.8VDC+0.5p-p COUT=Ceramic0.1µF R1180x281x 70 60 VIN=3.8VDC+0.5p-p COUT=Ceramic1µF Ripple Rejection RR[dB] Ripple Rejection RR[dB] 50 40 IOUT=50mA 50 40 30 20 10 0 IOUT=30mA IOUT=1mA IOUT=50mA 30 20 10 0 0.1 1 IOUT=30mA IOUT=1mA 10 Frequency f[kHz] 100 0.1 1 10 Frequency f[kHz] 100 10 R1180x R1180x361x 70 60 VIN=4.6VDC+0.5p-p COUT=Ceramic0.1µF R1180x361x 70 60 VIN=4.6VDC+0.5p-p COUT=Ceramic1µF Ripple Rejection RR[dB] 50 40 30 20 10 0 0.1 1 IOUT=30mA IOUT=1mA IOUT=50mA Ripple Rejection RR[dB] 50 40 30 20 10 0 IOUT=1mA IOUT=50mA IOUT=30mA 10 Frequency f[kHz] 100 0.1 1 10 Frequency f[kHz] 100 9) Ripple Rejection vs. Input Bias Voltage (Topt=25°C, CIN=none, COUT=ceramic0.1µF) R1180x281x(IOUT=1mA) R1180x281x(IOUT=30mA) 50 45 50 45 f=600Hz f=1kHz f=10kHz f=100kHz Ripple Rejection RR[dB] Ripple Rejection RR[dB] 40 35 30 25 20 15 10 5 0 2.9 3.2 3.5 Input Voltage VIN[V] 3.8 f=600Hz f=1kHz f=10kHz f=100kHz 40 35 30 25 20 15 10 5 0 2.9 3.2 3.5 3.8 Input Voltage VIN[V] R1180x281x(IOUT=50mA) 50 45 Ripple Rejection RR[dB] f=600Hz f=1kHz f=10kHz f=100kHz 40 35 30 25 20 15 10 5 0 2.9 3.2 3.5 Input Voltage VIN[V] 3.8 11 R1180x 10) Input Transient Response (CIN=none, tr=tf=5µs) R1180x281x 5.5 IOUT=1mA COUT=Ceramic1µF 6 5 4 3 2 Output Voltage VOUT[V] 5.0 Input Voltage 4.5 4.0 3.5 Output Voltage 3.0 2.5 2.0 0 100 200 300 400 500 Time T[µs] 600 700 800 900 1 0 −1 1000 R1180x281x 5.5 Output Voltage VOUT[V] IOUT=30mA COUT=Ceramic0.1µF 6 5 4 3 2 Input Voltage VIN[V] Input Voltage VIN[V] 5.0 Input Voltage 4.5 4.0 3.5 Output Voltage 3.0 2.5 2.0 0 20 40 60 80 100 Time T[µs] 120 140 160 180 200 1 0 −1 R1180x281x 5.5 Output Voltage VOUT[V] IOUT=30mA COUT=Ceramic0.47µF 6 5 5.0 Input Voltage 4.5 4.0 3.5 Output Voltage 4 3 2 1 0 −1 0 20 40 60 80 100 Time T[µs] 120 140 160 180 200 3.0 2.5 2.0 12 Input Voltage VIN[V] R1180x R1180x281x 5.5 Output Voltage VOUT[V] IOUT=30mA COUT=Ceramic1µF 6 5 4 3 2 Input Voltage VIN[V] 5.0 Input Voltage 4.5 4.0 3.5 Output Voltage 3.0 2.5 2.0 0 20 40 60 80 100 Time T[µs] 120 140 160 180 200 1 0 −1 11) Load Transient Response (tr=tf=0.5µs VIN=3.8V) R1180x281x COUT=Ceramic0.1µF 5.0 4.5 Output Current 20 4.0 3.5 Output Voltage 0 −10 −20 −30 −40 0 100 200 300 400 500 600 700 800 900 1000 3.0 2.5 2.0 Time T[µs] R1180x281x 5.0 4.5 Output Current COUT=Ceramic1µF 20 10 0 4.0 3.5 3.0 2.5 2.0 0 100 200 300 400 500 600 700 800 900 Output Voltage −10 −20 −30 −40 1000 Time T[µs] Output Current IOUT[mA] Output Voltage VOUT[V] Output Current IOUT[mA] Output Voltage VOUT[V] 10 13 R1180x R1180x281x 5.0 4.5 Output Current COUT=Ceramic10µF 20 4.0 3.5 Output Voltage 0 −10 −20 −30 −40 0 100 200 300 400 500 Time T[µs] 600 700 800 900 1000 3.0 2.5 2.0 R1180x281x 5.0 4.5 Output Current COUT=Ceramic0.1µF 150 Output Current IOUT[mA] Output Voltage VOUT[V] 100 50 0 Output Voltage 4.0 3.5 3.0 2.5 2.0 0 20 40 60 80 100 Time T[µs] 120 140 160 180 −50 −100 −150 200 R1180x281x 5.0 4.5 Output Current COUT=Ceramic0.47µF 150 4.0 3.5 Output Voltage 50 0 −50 −100 −150 Time T[µs] 3.0 2.5 2.0 14 Output Current IOUT[mA] Output Voltage VOUT[V] 100 Output Current IOUT[mA] Output Voltage VOUT[V] 10 R1180x R1180x281x 5.0 4.5 Output Current COUT=Ceramic1.0µF 150 Output Current IOUT[mA] Output Voltage VOUT[V] 100 50 0 Output Voltage 4.0 3.5 3.0 2.5 2.0 0 20 40 60 80 100 Time T[µs] 120 140 160 180 −50 −100 −150 200 12) ESR vs. Output Current R1180x121x(CIN =Ceramic 1.0µA, COUT =Ceramic 0.1µF) 1000 R1180x281x(CIN =Ceramic 1.0µA, COUT =Ceramic 0.1µF) 1000 100 ESR[Ω] 100 ESR [Ω] 10 10 1 1 0.1 0.1 0.01 0 50 100 Output Current IOUT [mA] 150 0.01 0 50 100 Output Current IOUT [mA] 150 The relations between IOUT (Output Current) and ESR of an output capacitor are shown above. The conditions when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph. (1) VIN=VOUT+1V (2) Frequency Band: 10Hz to 2MHz (BW=30Hz) (3) Temperature: −40°C to 85°C 15 PACKAGE INFORMATION PE-SOT-23-5-0510 • SOT-23-5 (SC-74A) 2.9±0.2 1.9±0.2 (0.95) (0.95) Unit: mm PACKAGE DIMENSIONS +0.2 1.1 −0.1 0.8±0.1 4 5 +0.2 1.6 − 0.1 2.8±0.3 0 to 0.1 1 2 0.4±0.1 3 TAPING SPECIFICATION 0.3±0.1 +0.1 φ1.5 0 4.0±0.1 2.0±0.05 1.75±0.1 3.5±0.05 4.0±0.1 ∅1.1±0.1 8.0±0.3 3.3 2.0MAX. 3.2 TR User Direction of Feed TAPING REEL DIMENSIONS (1reel=3000pcs) 11.4±1.0 9.0±0.3 21±0.8 ∅60 +1 0 ∅180 0 1.5 − 2±0.5 ∅ 13±0.2 0.2 MIN. +0.1 0.15 −0.05 PACKAGE INFORMATION PE-SOT-23-5-0510 POWER DISSIPATION (SOT-23-5) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: (Power Dissipation (SOT-23-5) is substitution of SOT-23-6.) Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result (Topt=25°C,Tjmax=125°C) Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.5mm × 44pcs Standard Land Pattern Power Dissipation Thermal Resistance 600 Free Air 250mW 400°C/W 420mW θja=(125−25°C)/0.42W=263°C/W Power Dissipation PD(mW) 500 420 400 300 200 100 0 0 25 On Board 40 Free Air 250 40 50 75 85 100 Ambient Temperature (°C) 125 150 Power Dissipation Measurement Board Pattern IC Mount Area Unit : mm RECOMMENDED LAND PATTERN 0.7 MAX. 1.0 2.4 0.95 0.95 1.9 (Unit: mm) PACKAGE INFORMATION PE-SC-82AB-0512 • SC-82AB 2±0.2 Unit: mm PACKAGE DIMENSIONS (0.7) 0.3±0.1 4 3 0.3±0.1 ±0.2 1.25 −0.1 2.1±0.3 1 2 0.3±0.2 0 to 0.1 0.16 +0.1 −0.06 2.0±0.05 1.3±0.2 0.9±0.1 0.3±0.1 0.4±0.1 0.05 TAPING SPECIFICATION 0.2±0.1 ∅1.5 0 +0.1 4.0±0.1 3.5±0.05 2.2 1.6MAX. 4.0±0.1 ∅1.1±0.1 1.75±0.1 TR User Direction of Feed TAPING REEL DIMENSIONS (1reel=3000pcs) 11.4±1.0 9.0±0.3 21±0.8 +1 60 0 0 180 −1.5 2±0.5 13±0.2 2.6 8.0±0.3 PACKAGE INFORMATION PE-SC-82AB-0512 POWER DISSIPATION (SC-82AB) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result (Topt=25°C,Tjmax=125°C) Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.5mm × 44pcs Standard Land Pattern Power Dissipation Thermal Resistance 600 Free Air 150mW 667°C/W 380mW θja=(125−25°C)/0.38W=263°C/W Power Dissipation PD(mW) 500 400 300 200 100 0 0 25 150 380 On Board 40 Free Air 40 50 75 85 100 Ambient Temperature (°C) 125 150 Power Dissipation Measurement Board Pattern IC Mount Area (Unit : mm) RECOMMENDED LAND PATTERN 0.65 0.65 0.6 0.6 0.8 0.8 0.6 0.8 0.65 0.6 0.8 0.8 1.9 (Unit: mm) PACKAGE INFORMATION PE-SON1612-6-0510 • SON1612-6 Unit: mm PACKAGE DIMENSIONS 6 4 (0.2) (0.3) 8.0±0.3 1.6±0.1 0.3TYP. 0.5 1.2±0.05 1.6±0.05 1 3 0.125±0.055 0.6MAX. 0.08 0.22±0.05 0.08 M TAPING SPECIFICATION 0.25±0.1 1.5 +0.1 0 4.0±0.1 2.0±0.05 1.75 1.1±0.1 1.75 1.1MAX. 4.0±0.1 TR User Direction of Feed TAPING REEL DIMENSIONS (1reel=4000pcs) 11.4±1.0 9.0±0.3 21±0.8 ∅60 +1 0 ∅180 0 1.5 − 2±0.5 ∅ 13±0.2 3.5±0.05 1.75±0.1 (0.3) PACKAGE INFORMATION PE-SON1612-6-0510 Power Dissipation (SON1612-6) This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result (Topt=25°C,Tjmax=125°C) Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50%, Back side : Approx.50% φ0.5mm × 24pcs Standard Land Pattern Power Dissipation Thermal Resistance 600 500mW θja=(125−25°C)/0.5W=200°C/W 39 On Board Power Dissipation PD(mW) 500 400 40 27 200 100 0 0 25 50 75 85 100 Ambient Temperature (°C) 125 150 27 40 Power Dissipation Measurement Board Pattern IC Mount Area Unit : mm RECOMMENDED LAND PATTERN 0.28 0.5 0.45 0.45 (Unit: mm) 39 300 MARK INFORMATION ME-R1180N-0409 R1180N SERIES MARK SPECIFICATION • SOT-23-5 (SC-74A) 1 4 , , 2 5 , 3 : Product Code (refer to Part Number vs. Product Code) : Lot Number • Part Number vs. Product Code Product Code 1 2 3 Part Number R1180N121B R1180N131B R1180N141B R1180N151B R1180N161B R1180N171B R1180N181B R1180N191B R1180N201B R1180N211B R1180N221B R1180N231B R1180N241B R1180N251B R1180N261B R1180N271B R1180N281B R1180N291B R1180N301B R1180N311B R1180N321B R1180N331B R1180N341B R1180N351B R1180N361B Part Number R1180N121C R1180N131C R1180N141C R1180N151C R1180N161C R1180N171C R1180N181C R1180N191C R1180N201C R1180N211C R1180N221C R1180N231C R1180N241C R1180N251C R1180N261C R1180N271C R1180N281C R1180N291C R1180N301C R1180N311C R1180N321C R1180N331C R1180N341C R1180N351C R1180N361C Product Code 1 2 3 C C C C C C C C C C C C C C C C C C C C C C C C C 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 D D D D D D D D D D D D D D D D D D D D D D D D D 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 MARK INFORMATION ME-R1180Q-0409 R1180Q SERIES MARK SPECIFICATION • SC-82AB 1 3 , , 2 4 : Product Code (refer to Part Number vs. Product Code) : Lot Number 2 1 • Part Number vs. Product Code Product Code 1 2 3 4 Part Number R1180Q121B R1180Q131B R1180Q141B R1180Q151B R1180Q161B R1180Q171B R1180Q181B R1180Q191B R1180Q201B R1180Q211B R1180Q221B R1180Q231B R1180Q241B R1180Q251B R1180Q261B R1180Q271B R1180Q281B R1180Q291B R1180Q301B R1180Q311B R1180Q321B R1180Q331B R1180Q341B R1180Q351B R1180Q361B Part Number R1180Q121C R1180Q131C R1180Q141C R1180Q151C R1180Q161C R1180Q171C R1180Q181C R1180Q191C R1180Q201C R1180Q211C R1180Q221C R1180Q231C R1180Q241C R1180Q251C R1180Q261C R1180Q271C R1180Q281C R1180Q291C R1180Q301C R1180Q311C R1180Q321C R1180Q331C R1180Q341C R1180Q351C R1180Q361C Product Code 1 2 A A A A A A A A B B B B B B B B B B C C C C C C C 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 D D D D D D D D E E E E E E E E E E F F F F F F F 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 MARK INFORMATION ME-R1180D-0409 R1180D SERIES MARK SPECIFICATION • SON1612-6 1 5 1 2 3 ～ 4 : Product Code (refer to Part Number vs. Product Code) , 6 : Lot Number 4 5 6 • Part Number vs. Product Code Product Code 1 2 3 4 Part Number R1180D121B R1180D131B R1180D141B R1180D151B R1180D161B R1180D171B R1180D181B R1180D191B R1180D201B R1180D211B R1180D221B R1180D231B R1180D241B R1180D251B R1180D261B R1180D271B R1180D281B R1180D291B R1180D301B R1180D311B R1180D321B R1180D331B R1180D341B R1180D351B R1180D361B Part Number R1180D121C R1180D131C R1180D141C R1180D151C R1180D161C R1180D171C R1180D181C R1180D191C R1180D201C R1180D211C R1180D221C R1180D231C R1180D241C R1180D251C R1180D261C R1180D271C R1180D281C R1180D291C R1180D301C R1180D311C R1180D321C R1180D331C R1180D341C R1180D351C R1180D361C Product Code 1 2 3 4 G G G G G G G G G G G G G G G G G G G G G G G G G 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 0 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 0 B B B B B B B B B B B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G G G G G G G G G G 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 C C C C C C C C C C C C C C C C C C C C C C C C C R1180D181B5 G