R1191L150B-TR

R1191x SERIES 300mA LDO REGULATOR with the Reverse Current Protection NO.EA-229-111026 OUTLINE R1191x Series are a low supply current voltage regulator with high output voltage accuracy. The maximum operating voltage is 16V. These ICs can switch to the fast mode and the low power mode by the low power / fast mode changer pin (ECO pin) without changing the output voltage value. Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit, a thermal shutdown circuit and a chip enable circuit. Moreover, the R1191x Series has the reverse current protection function, which protects the reverse current flow into VDD pin when the output pin voltage becomes higher than the VDD pin voltage. Thus it is suitable for the back-up circuit. Since the packages for these ICs are SOT-89-5, SOT-23-5 and DFN1616-6, therefore high density mounting of the ICs on boards is possible. FEATURES • Supply Current ..................................................... Typ. 50μA (Fast Mode), Typ. 6.0μA (Low Power Mode) • Standby Mode ...................................................... Typ. 0.3μA • Reverse Current................................................... Max. 0.1μA • Output Current ..................................................... Min. 300mA • Input Voltage Range ............................................ 3.5V to 16.0V • Output Voltage Range.......................................... 2.0V to 15.0V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) • Output Voltage Accuracy...................................... ±1.5% (Fast Mode) ±2.5% (Low Power Mode) • Temperature-Drift Coefficient of Output Voltage .. Typ. ±80ppm/°C • Dropout Voltage ................................................... Typ. 0.55V (Fast Mode, IOUT=300mA ,VOUT=5.0V) Typ. 0.70V (Low Power Mode, IOUT=300mA,VOUT=5.0V) • Ripple Rejection................................................... Typ. 60dB (f=1kHz,VOUT=5.0V, Fast Mode) • Line Regulation .................................................... Typ. 0.02%/V (Fast Mode) • Packages ............................................................ DFN1616-6, SOT-23-5, SOT-89-5 • Built-in fold-back protection circuit ....................... Typ. 50mA (Current at short mode) • Built-in Thermal Shutdown Circuit........................ Shutdown Temperature at 150°C • Ceramic capacitors are recommended to be used with this IC ····CIN=2.2μF or more, COUT=4.7μF or more APPLICATIONS • Power source for digital home appliances • Power source for audio visual equipment 1 R1191x BLOCK DIAGRAM R1191xxxxB R1191xxxxD ECO ECO Thermal Shutdown VDD Thermal Shutdown VOUT VDD VOUT Vref Vref Peak Short Current Protection Protection Peak Short Current Protection Protection Reverse Detector CE Reverse Detector GND CE GND SELECTION GUIDE The output voltage, auto-discharge function, and package, for the ICs can be selected at the user’s request. Product Name Package Quantity per Reel Pb Free Halogen Free DFN1616-6 5,000 pcs Yes Yes R1191Nxxx∗-TR-FE SOT-23-5 3,000 pcs Yes Yes R1191Hxxx∗-T1-FE SOT-89-5 1,000 pcs Yes Yes R1191Lxxx∗-TR xxx : The output voltage can be designated in the range from 2.0V(020) to 15.0V(150) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.) ∗ : The auto discharge function at off state are options as follows. (B) without auto discharge function at off state. (D) with auto discharge function at off state. 2 R1191x PIN CONFIGURATIONS • DFN1616-6*1 Top View 6 5 4 • SOT-23-5 Bottom View 4 5 2 3 3 2 4 5 3 1 4 6 ∗ 1 5 • SOT-89-5 (mark side) 1 1 2 2 3 PIN DISCRIPTIONS • DFN1616-6*1 Pin No Symbol Pin Description 1 ECO 2 NC No Connection 3 VDD Input Pin 4 VOUT Output pin 5 GND Ground Pin 6 CE Low Power / Fast Mode Changer Pin ("H": Fast Mode) Chip Enable Pin ("H" Active) ∗1) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it open is also acceptable. • • SOT-23-5 Pin No Symbol Pin Description 1 ECO Low Power / Fast Mode Changer Pin ("H": Fast Mode) 2 GND Ground Pin 3 CE Chip Enable Pin ("H" Active) 4 VOUT Output pin 5 VDD Input Pin SOT-89-5 Pin No Symbol Pin Description 1 VOUT Output pin 2 GND Ground Pin 3 CE 4 ECO 5 VDD Chip Enable Pin ("H" Active) Low Power / Fast Mode Changer Pin ("H": Fast Mode) Input Pin 3 R1191x ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit VIN Input Voltage −0.3 to 18.0 V VCE Input Voltage (CE Pin) −0.3 to 18.0 V VECO Input Voltage (ECO Pin) −0.3 to VIN + 0.3 ≤ 18.0 V VOUT Output Voltage −0.3 to 18.0 V IOUT Output Current 400 mA Power Dissipation (DFN1616-6)* 640 Power Dissipation (SOT-23-5)* 420 Power Dissipation (SOT-89-5)* 900 Topt Operating Temperature Range −40 to +85 °C Tstg Storage Temperature Range −55 to +125 °C PD mW ∗) For Power Dissipation, please refer to PACKAGE INFORMATION. ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings is not assured. RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS) All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions. 4 R1191x ELECTRICAL CHARACTERISTICS VIN=VCE=Set VOUT+3.0V (Max.16V), CIN=2.2μF, COUT=4.7μF IOUT=1mA, unless otherwise noted. are applicable under the condition of −40°C ≤ Topt ≤ 85°C. The values in Topt=25°C R1191xxxxB/D Symbol Item Conditions Fast Mode VECO=VIN VOUT ΔVOUT IOUT Output Voltage Low Power VECO=0V Mode Min. Typ. Max. Topt=25°C −40°C ≤ Topt ≤ 85°C Topt=25°C ×0.985 ×0.970 ×0.975 ×1.015 ×1.030 ×1.025 −40°C ≤ Topt ≤ 85°C ×0.960 ×1.040 Output Voltage Deviation between Fast Mode and Low Power Mode −1.5 0 1.5 Output Current 300 VECO=VIN, Fast Mode 50 1mA ≤ IOUT ≤ 300mA ΔVOUT/ Load Regulation ΔIOUT Low Power VECO=GND, 60 Mode 1mA ≤ IOUT ≤ 300mA VDIF Dropout Voltage Refer to the following table Unit V % mA 120 mV 130 ISS1 Supply Current (Fast Mode) VECO=VIN, IOUT=0mA 50 100 μA ISS2 Supply Current (Low Power Mode) 6 15 μA VECO=GND, IOUT=0mA Istandby Supply Current (Standby) VIN=16V, VCE=0V (If VOUT < 3.0V, VIN=14V) 0.3 1.0 μA ΔVOUT/ Line Regulation ΔVIN Set VOUT+0.5V ≤ VIN ≤ 16V (If Set VOUT < 3.0V, 3.5V ≤ VIN ≤ 14V) 0.02 0.10 %/V RR VIN ΔVOUT/ ΔTopt ISC VCEH VCEL TTSD TTSR RLOW IREV Ripple Rejection Input Voltage f=1kHz, IOUT=30mA 2.0V≤VOUT