R3131N26BA

Low Voltage Detector with built-in Delay Circuit R3130N×××A/C, R3131N×××A/C APPLICATION MANUAL NO. EA-073-0012 Low Voltage Detector with built-in Delay Circuit R3130N×××A/C, R3131N×××A/C OUTLINE R3130N/R3131N Series are low voltage detector ICs with built-in delay circuit, high Detector Threshold accuracy and ultra low supply current by CMOS process, which can be operated at low voltage. These ICs can be used as system reset generator, and each of these ICs consists of a voltage reference, a comparator, resistors for setting voltage detector threshold, an output driver transistor, and an output delay generator. Detector threshold is fixed internally with high accuracy and requires no adjustment. When Supply Voltage crosses a setting detector threshold voltage from a high value to a lower value, this IC generates reset signal. R3130N Series output “L” at detection mode, while R3131N Series output “H”. Further, each of R3130N/R3131N Series embeds an output delay generator, when Supply Voltage crosses a setting detector threshold voltage from a low value to a higher value, during a setting delay time which is fixed in the IC, this IC keeps the reset condition. Output Delay Time can be selected. (TYP 240ms is standard.) . Two output types, Nch open drain type and CMOS type, are available. Since the package for these ICs are SOT23-3 (Mini-mold) package, high density mounting of the ICs on board is possible. FEATURES • Pin to Pin compatible with MAX 809/810 (R3130N××××: MAX 809, R3131N××××: MAX 810) • Ultra-low supply Current ........................................................ TYP 1.25µA (R313×N27××: VDD=3.0V) . • Operating Voltage Range ........................................................ 1.0V to 6.0V (Topt=25°C) • Detector Threshold .................................................................. Setting with a step of 0.1V in the range of 1.6V to 4.8V is possible. • Embedded Power on Reset Delay Time Circuit .................... Delay Time can be designated. Refer to Selection Guide. • High Accuracy Detector Threshold......................................... ±1.5% • High Accuracy Output Delay Time ......................................... ±10.0% • Low Temperature-Drift Coefficient of Detector Threshold... TYP ±100ppm/°C . • Two Output Types .................................................................... Nch Open Drain and CMOS • Small Package ........................................................................... SOT-23-3 1 R3130N×××A/C, R3131N×××A/C APPLICATIONS • CPU & Logic Circuit Reset • Battery Checker • Window Comparator • Wave Shaping Circuit • Battery Back-Up Circuit • Power Failure Detector BLOCK DIAGRAMS • R3130N×××A Nch Open Drain Output VDD VDD • R3130N×××C CMOS Output + Vref GND Delay Circuit OUT + Vref GND Delay Circuit OUT • R3131N×××A Nch Open Drain Output VDD • R3131N×××C CMOS Output VDD + Vref GND Delay Circuit OUT + Vref GND Delay Circuit OUT 2 R3130N×××A/C, R3131N×××A/C TIMING CHART Supply Voltage (VDD) Detector Threshold VDET Minimum Operating Voltage VSS Supply Voltage (VDD) Detector Threshold VDET Minimum Operating Voltage VSS Output Voltage VSS Tdelay Output Voltage VSS Tdelay R3130N Operation Diagram • Output Delay Operation Output Delay Time, or Tdelay is specified as follows: 1. In the case of Nch Open Drain Output: R3131N Operation Diagram The time interval from rising edge of VDD pulse (1.0V→(VDET)+0.1V) to the time at which the output reaches 2.5V under the condition that the output pin (OUT) is pulled up to 5V through a 470kΩ resistor. 2. In the case of CMOS Output The time interval from rising edge of VDD pulse (1.0V→(VDET)+0.1V) to the time at which the output reaches VDD/2. VDET+1.0V Input Voltage (VDD) VDET+1.0V Input Voltage (VDD) 1.0V GND 1.0V GND 5.0V VDET+0.1V Output Voltage Output Voltage 2.5V (VDET+0.1V)/2 GND Trst Tdelay GND Trst Tdelay Nch Open Drain Output CMOS Output 3 R3130N×××A/C, R3131N×××A/C SELECTION GUIDE The detector threshold , the output type, and Output delay time of R3130N series can be designated at the user’s request by specifying the part number as follows: R3130N×××××-TR R3131N×××××-TR ↑ ↑↑↑ ↑ a bcd e Code Setting Detector Threshold (VDET) a Stepwise setting with a step of 0.1V in the range of 1.6V to 4.8V is possible. The following 6 kinds of voltage are also standard. 2.63V 2.93V 3.08V 4.00V 4.40V 4.65V , , , , , Selection of Output Delay Time b E: 240ms (Standard) A: 50ms B: 100ms D: 200ms H: 400ms *A, B, D, H versions can be produced only for 6 kinds of standard voltage items. Designation Output type c d e A: Nch Open Drain C: CMOS Description of last one digit of 6 kinds of standard voltage items. Designation of Taping Direction (Refer to Taping Specification) Contents ←Part Number ←Part Number PIN CONFIGURATION SOT-23-3 3 MARK SIDE 1 2 4 R3130N×××A/C, R3131N×××A/C PIN DESCRIPTION Pin No. 1 2 3 Symbol GND OUT VDD Ground Pin Output Pin R3130N: Output “L” at detection mode, Output “H” at release mode R3131N: Output “H” at detection mode, Output “L” at release mode Input Pin Description ABSOLUTE MAXIMUM RATINGS Symbol VDD VOUT IOUT PD Topt Tstg Tsolder Supply Voltage Output Voltage Output Current Power Dissipation Operating Temperature Range Storage Temperature Range Soldering Temperature CMOS Nch Item Rating 6.5 VSS-0.3 to VDD+0.3 VSS-0.3 to 6.5 20 150 -40 to +85 -55 to +125 260°C, 10s Unit V V V mA mW °C °C ABSOLUTE MAXIMUM RATINGS Absolute Maximum Ratings are threshold limit values that must not be exceeded even for a moment under any conditions. Moreover, such values for any items must not be reached simultaneously. Operation above these absolute maximum ratings may cause degradation or permanent damage to the device. These are just stress ratings and do not necessarily imply to guarantee operation below these limits. 5 R3130N×××A/C, R3131N×××A/C ELECTRICAL CHARACTERISTICS • R3130N26××3-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 2.591 VDD=6.00V VDD=2.73V VDD=2.53V VDD=2.73V IOUT=-500µA , VDD=2.53V IOUT=1.2mA , 0.8×VDD 0.75 2.630 1.40 1.25 1.10 0.93×VDD 0.16 0.30 Conditions MIN. TYP. 6.0 1.00 2.669 5.00 4.00 3.50 [Topt=25°C] MAX. Unit V V V µA µA µA V V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C [Topt=25°C] • R3130N29××3-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 2.887 VDD=6.00V VDD=3.03V VDD=2.83V VDD=3.03V IOUT=-500µA , VDD=2.83V IOUT=1.2mA , 0.8×VDD 0.75 2.930 1.40 1.25 1.10 0.93×VDD 0.16 Conditions MIN. TYP. 6.0 MAX. Unit V V V µA µA µA V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient 1.00 2.973 5.00 4.00 3.50 0.30 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 6 R3130N×××A/C, R3131N×××A/C • R3130N30××8-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 3.034 VDD=6.00V VDD=3.18V VDD=2.98V VDD=3.18V IOUT=-500µA , VDD=2.98V IOUT=1.2mA , 0.8×VDD 0.75 3.080 1.40 1.25 1.10 0.93×VDD 0.16 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V V V µA µA µA V 0.30 V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient 1.00 3.126 5.00 4.00 3.50 Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C [Topt=25°C] • R3130N40××-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 3.940 VDD=6.00V VDD=4.10V VDD=3.90V VDD=4.10V IOUT=-800µA , VDD=3.90V IOUT=3.2mA , 0.8×VDD 0.75 4.000 1.40 1.30 1.15 0.95×VDD 0.18 Conditions MIN. TYP. 6.0 MAX. Unit V V V µA µA µA V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient 1.00 4.060 5.00 4.00 3.50 0.40 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 7 R3130N×××A/C, R3131N×××A/C • R3130N44××-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 4.334 VDD=6.00V VDD=4.50V VDD=4.30V VDD=4.50V IOUT=-800µA , VDD=4.30V IOUT=3.2mA , 0.8×VDD 0.75 4.400 1.40 1.30 1.15 0.95×VDD 0.18 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V V V µA µA µA V 0.40 V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient 1.00 4.466 5.00 4.00 3.50 Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C [Topt=25°C] • R3130N46××5-TR Symbol VDDH Item Maximum Operating Voltage IOL=50µA 4.581 VDD=6.00V VDD=4.75V VDD=4.55V VDD=4.75V IOUT=-800µA , VDD=4.55V IOUT=3.2mA , 0.8×VDD 0.75 4.650 1.40 1.30 1.15 0.95×VDD 0.18 Conditions MIN. TYP. 6.0 MAX. Unit V V V µA µA µA V VDDL (*1) Minimum Operating Voltage VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient 1.00 4.719 5.00 4.00 3.50 0.40 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 8 R3130N×××A/C, R3131N×××A/C • R3131N26××3-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=2.73V VDD=2.53V VDD=2.73V IOUT=-500µA , VDD=2.53V IOUT=1.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 2.591 0.90 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V 1.00 V 2.630 1.40 1.25 1.10 0.93×VDD 0.16 2.669 5.00 4.00 3.50 V µA µA µA V 0.30 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C [Topt=25°C] • R3131N29××3-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=3.03V VDD=2.83V VDD=2.83V IOUT=-500µA , VDD=3.03V IOUT=1.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 2.887 0.90 Conditions MIN. TYP. 6.0 MAX. Unit V 1.00 V 2.930 1.40 1.25 1.10 0.93×VDD 0.16 2.973 5.00 4.00 3.50 V µA µA µA V 0.30 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 9 R3130N×××A/C, R3131N×××A/C • R3131N30××8-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=3.18V VDD=2.98V VDD=2.98V IOUT=-500µA , VDD=3.18V IOUT=1.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 3.034 0.90 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V 1.00 V 3.080 1.40 1.25 1.10 0.93×VDD 0.16 3.126 5.00 4.00 3.50 V µA µA µA V 0.30 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C [Topt=25°C] • R3131N40××-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=3.90V VDD=4.10V VDD=3.90V IOUT=-800µA , VDD=4.10V IOUT=3.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 3.940 0.90 Conditions MIN. TYP. 6.0 MAX. Unit V 1.00 V 4.000 1.40 1.30 1.15 0.95×VDD 0.18 4.060 5.00 4.00 3.50 V µA µA µA V 0.40 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 10 R3130N×××A/C, R3131N×××A/C • R3131N44××-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=4.50V VDD=4.30V VDD=4.30V IOUT=-800µA , VDD=4.50V IOUT=3.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 4.334 0.90 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V 1.00 V 4.400 1.40 1.30 1.15 0.95×VDD 0.18 4.466 5.00 4.00 3.50 V µA µA µA V 0.40 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C 11 R3130N×××A/C, R3131N×××A/C • R3131N46××5-TR Symbol VDDH Item Maximum Operating Voltage CMOS Output VDDL (*3) Minimum Operating Voltage Nch Open Drain Output VDET ISS1 ISS2 ISS3 VOH VOL Tdelay (*2) ∆VDET/ ∆Topt Detector Threshold Supply Current1 Supply Current2 Supply Current3 “H” Output Voltage “L” Output Voltage Output Delay Time for release Detector Threshold Temperature Coefficient VDD=6.00V VDD=4.75V VDD=4.55V VDD=4.55V IOUT=-800µA , VDD=4.75V IOUT=3.2mA , 0.8×VDD IOH=-10µA VDS=6.5V 4.581 0.90 Conditions MIN. TYP. 6.0 [Topt=25°C] MAX. Unit V 1.00 V 4.650 1.40 1.30 1.15 0.95×VDD 0.18 4.719 5.00 4.00 3.50 V µA µA µA V 0.40 V Refer to electrical characteristics by Output Delay Time for release -40°C ≤ Topt ≤ 85°C ±100 ppm/ °C *1) Supply Voltage when Output Voltage becomes equal or less than 0.3V. (As for Nch Open Drain Output type, pull-up resistor is 470kΩ, pull-up voltage is 5.0V. *2) Time interval of rising edge of VDD which is set from 1.0V to VDET+1.0V, and the point of which Output voltage reaches to 50% of final voltage. *3) CMOS Output type; Supply Voltage when Output Voltage becomes equal or more than 0.8×VDD. Nch Open Drain type; Supply Voltage when off leakage current becomes equal or less than 0.1µA. 12 R3130N×××A/C, R3131N×××A/C ELECTRICAL CHARACTERISTICS BY OUTPUT DELAY TIME [Topt=25°C] Output Delay Time (Tdelay) Part Number R313×N××A× R313×N××B× R313×N××D× R313×N××E× R313×N××H× VDD=1.0V to VDET+1.0V Test Condition MIN. 45 90 180 216 360 TYP. 50 100 200 240 400 MAX. 55 110 220 264 440 ms Unit 13 R3130N×××A/C, R3131N×××A/C ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD • R3130N16EA/C to R3130N48EA/C Detector Threshold Part Number Supply Current 1 Supply Current 2 Supply Current 3 VDET (V) MIN. TYP. 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.400 2.500 2.600 2.700 2.800 2.900 3.000 3.100 3.200 3.300 3.400 3.500 3.600 3.700 3.800 3.900 4.000 4.100 4.200 4.300 4.400 4.500 4.600 4.700 4.800 MAX. 1.624 1.725 1.827 1.928 2.030 2.131 2.233 2.334 2.436 2.537 2.639 2.740 2.842 2.943 3.045 3.146 3.248 3.349 3.451 3.552 3.654 3.755 3.857 3.958 4.060 4.161 4.263 4.364 4.466 4.567 4.669 4.770 4.872 VDD=6.0V ISS1 (µA) Condition TYP. MAX. ISS2 (µA) Condition TYP. MAX. ISS3 (µA) Condition TYP. MAX. R3130N16EA/C R3130N17EA/C R3130N18EA/C R3130N19EA/C R3130N20EA/C R3130N21EA/C R3130N22EA/C R3130N23EA/C R3130N24EA/C R3130N25EA/C R3130N26EA/C R3130N27EA/C R3130N28EA/C R3130N29EA/C R3130N30EA/C R3130N31EA/C R3130N32EA/C R3130N33EA/C R3130N34EA/C R3130N35EA/C R3130N36EA/C R3130N37EA/C R3130N38EA/C R3130N39EA/C R3130N40EA/C R3130N41EA/C R3130N42EA/C R3130N43EA/C R3130N44EA/C R3130N45EA/C R3130N46EA/C R3130N47EA/C R3130N48EA/C 1.576 1.675 1.773 1.872 1.970 2.069 2.167 2.266 2.364 2.463 2.561 2.660 2.758 2.857 2.955 3.054 3.152 3.251 3.349 3.448 3.546 3.645 3.743 3.842 3.940 4.039 4.137 4.236 4.334 4.433 4.531 4.630 4.728 1.20 1.00 1.25 1.10 1.40 5.00 VDD=VDET +0.1V 4.00 VDD=VDET -0.1V 3.50 1.30 1.15 14 R3130N×××A/C, R3131N×××A/C Topt=25°C “H” Output Voltage “L” Output Voltage Minimum Operating Voltage VDDL (V) MAX. TYP. MAX. MIN. Output Delay Time Detector Threshold Temperature Coefficient ∆VDET/∆Topt (pm/°C) Condition TYP. VOH (V) Condition MIN. TYP. Condition VOL (V) TYP. Tdelay (ms) TYP. MAX. VDD=VDET +0.1V IOH= -150µA 0.80× VDD 0.95× VDD VDD=VDET -0.1V , IOL=1.2mA VDD=VDET +0.1V IOH= -500µA *1 0.75 *1 1.00 216 240 264 0.80× VDD 0.93× VDD -40°C ≤ Topt ≤ 85°C ±100 0.16 0.30 VDD=VDET +0.1V IOH= -800µA 0.80× VDD 0.95× VDD VDD=VDET -0.1V , IOL=3.2mA 0.18 0.40 *1 describes VDD Voltage when Output Voltage becomes equal or less than 0.3V. 15 R3130N×××A/C, R3131N×××A/C • R3131N16EA/C to R3131N48EA/C Detector Threshold Part Number Supply Current 1 Supply Current 2 Supply Current 3 VDET (V) MIN. TYP. 1.600 1.700 1.800 1.900 2.000 2.100 2.200 2.300 2.400 2.500 2.600 2.700 2.800 2.900 3.000 3.100 3.200 3.300 3.400 3.500 3.600 3.700 3.800 3.900 4.000 4.100 4.200 4.300 4.400 4.500 4.600 4.700 4.800 MAX. 1.624 1.725 1.827 1.928 2.030 2.131 2.233 2.334 2.436 2.537 2.639 2.740 2.842 2.943 3.045 3.146 3.248 3.349 3.451 3.552 3.654 3.755 3.857 3.958 4.060 4.161 4.263 4.364 4.466 4.567 4.669 4.770 4.872 VDD=6.0V ISS1 (µA) Condition TYP. MAX. ISS2 (µA) Condition TYP. MAX. ISS3 (µA) Condition TYP. MAX. R3131N16EA/C R3131N17EA/C R3131N18EA/C R3131N19EA/C R3131N20EA/C R3131N21EA/C R3131N22EA/C R3131N23EA/C R3131N24EA/C R3131N25EA/C R3131N26EA/C R3131N27EA/C R3131N28EA/C R3131N29EA/C R3131N30EA/C R3131N31EA/C R3131N32EA/C R3131N33EA/C R3131N34EA/C R3131N35EA/C R3131N36EA/C R3131N37EA/C R3131N38EA/C R3131N39EA/C R3131N40EA/C R3131N41EA/C R3131N42EA/C R3131N43EA/C R3131N44EA/C R3131N45EA/C R3131N46EA/C R3131N47EA/C R3131N48EA/C 1.576 1.675 1.773 1.872 1.970 2.069 2.167 2.266 2.364 2.463 2.561 2.660 2.758 2.857 2.955 3.054 3.152 3.251 3.349 3.448 3.546 3.645 3.743 3.842 3.940 4.039 4.137 4.236 4.334 4.433 4.531 4.630 4.728 1.20 1.00 1.25 1.10 1.40 5.00 VDD=VDET +0.1V 4.00 VDD=VDET -0.1V 3.50 1.30 1.15 16 R3130N×××A/C, R3131N×××A/C Topt=25°C “H” Output Voltage “L” Output Voltage Minimum Operating Voltage VDDL (V) MAX. TYP. MAX. MIN. Output Delay Time Detector Threshold Temperature Coefficient ∆VDET/∆Topt (ppm/°C) Condition TYP. VOH (V) Condition MIN. TYP. Condition VOL (V) TYP. Tdelay (ms) TYP. MAX. VDD=VDET -0.1V IOH= -150µA 0.80× VDD 0.95× VDD VDD=VDET +0.1V , IOL=1.2mA VDD=VDET -0.1V IOH= -500µA *2 0.90 *2 1.00 216 240 264 0.80× VDD 0.93× VDD -40°C ≤ Topt ≤ 85°C ±100 0.16 0.30 VDD=VDET -0.1V IOH= -800µA 0.80× VDD 0.95× VDD VDD=VDET +0.1V , IOL=3.2mA 0.18 0.40 *2 CMOS Output Type; describes VDD voltage when Output Voltage becomes equal or more than VDD×0.8V Nch Open Drain Output Type; describes VDD voltage when Off-leakage Current becomes equal or less than 0.1µA. 17 R3130N×××A/C, R3131N×××A/C OPERATION • Operation of R3130N Series VDD • CMOS Output Type OUT pin is connected to the drain of Nch Tr. and Pch Tr. in this IC. • Nch Open Drain Output Type Ra + Comparator Vref Rb Pch Delay Circuit OUT OUT pin is connected to the drain of Nch Tr. in this IC. (OUT pin should be pulled up to VDD or an external voltage level.) Nch GND Block Diagram 1 2 3 4 B Supply Voltage (VDD) A Detector Threshold(VDET) =Released Voltage Minimum Operating Voltage(VDDL) GND 5 Output Voltage (OUT) Tdelay GND Operating Diagram In the above diagram, ! Output Voltage becomes equal to supply voltage (Nch Open Drain Output Type; equal to pull-up Voltage). " When Supply Voltage is down to the detector threshold level (Point A), Vref ≥ VDD× Rb/(Ra+Rb) is true. Then, Output of the comparator is reversed, thus output voltage becomes equal to GND level. # When Supply Voltage is lower than minimum operating voltage, Output of transistor is indefinite, therefore Output is also indefinite. $ Output Voltage is equal to GND level. % When Supply voltage is higher than Released Voltage (Point B), Vref ≤ VDD× Rb/(Ra+Rb) is true. Then Output of the comparator is reversed, thus Output Voltage becomes equal to Supply Voltage (Nch Open Drain Output Type; equal to pull-up voltage). * There is no hysteresis range between Detector threshold and Released Voltage. 18 R3130N×××A/C, R3131N×××A/C • Operation of R3131N Series VDD • CMOS Output Type OUT pin is connected to the drain of Nch Tr. and Pch Tr. in this IC. • Nch Open Drain Output Type: I Ra + Comparator Vref Rb Pch Delay Circuit OUT OUT pin is connected to the drain of Nch Tr. in this IC. (OUT pin should be pulled up to VDD or an external voltage level.) Nch GND Block Diagram 1 2 3 4 B Supply Voltage (VDD) A Detector Threshold(VDET) =Released Voltage Minimum Operating Voltage(VDDL) GND 5 Output Voltage (VOUT) Tdelay GND Operation Diagram In the above diagram, ! Output Voltage becomes equal to GND level. " When Supply Voltage is down to the detector threshold level (Point A), Vref ≥VDD× Rb/(Ra+Rb) is true. Then, Output of the comparator is reversed, thus output voltage becomes equal to Supply Voltage (Nch Open Drain Output type; equal to pull-up Voltage). # When Supply Voltage is lower than minimum operating voltage, Output of transistor is indefinite, therefore Output is also indefinite.(Nch Open Drain Output type; Output voltage level is equal to pull-up voltage.) $ Output Voltage is equal to Supply Voltage. (Nch Open Drain Output type; equal to pull-up Voltage.) % When Supply voltage is higher than Released Voltage (Point B), Vref ≤ VDD× Rb/(Ra+Rb) is true. Then Output of the comparator is reversed, thus Output Voltage becomes equal to GND level after the output delay time. * There is no hysteresis range between Detector threshold and Released Voltage. 19 R3130N×××A/C, R3131N×××A/C TEST CIRCUITS • Test Circuit for Supply Current • Test Circuit for Detector Threshold (CMOS Output type; pull-up part is not necessary.) ISS VDD R313×N Series GND 5V VDD R313×N Series GND 470kΩ VOUT OUT VIN VIN OUT • Test Circuit for “H” Output Voltage (CMOS Output Type only) VDD R313×N Series GND OUT VOH V IOUT • Test Circuit for “L” Output Voltage VDD R313×N Series GND OUT VOL V IOUT VIN VIN • Test Circuit for Off Leakage Current • Test Circuit for Output Delay Time (CMOS Output type; pull-up is not necessary.) (VDET)+1.0V VDD Ioz VIN R313×N Series GND OUT VDS Input Voltage 1.0V GND VIN R3130N Series VDD R313×N Series GND R3131N Series VOUT OUT Output Voltage 100% 50% GND Tdelay 20 R3130N×××A/C, R3131N×××A/C TYPICAL CHARACTERISTICS 1) Supply Current vs. Input Voltage R3130N26××3 R3131N26××3 2.0 Supply Current ISS[µA] R3130N29××3 R3131N29××3 2.0 Topt=85°C Supply Current ISS[µA] 1.6 1.2 0.8 0.4 0.0 0 1 2 25°C 1.6 1.2 0.8 0.4 0.0 0 1 2 25°C Topt=85°C -40°C -40°C 3 4 5 6 3 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] R3130N30××8 R3131N30××8 2.0 Supply Current ISS[µA] R3130N40×× R3131N40×× 2.0 Topt=85°C Supply Current ISS[µA] 1.6 1.2 0.8 0.4 0.0 0 1 2 25°C 1.6 1.2 0.8 0.4 0.0 0 1 2 25°C Topt=85°C -40°C -40°C 3 4 5 6 3 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] R3130N44×× R3131N44×× 2.0 Supply Current ISS[µA] R3130N46××5 R3131N46××5 2.0 Supply Current ISS[µA] 1.6 1.2 0.8 0.4 0.0 0 1 2 3 Topt=85°C 25°C -40°C 1.6 1.2 0.8 0.4 0.0 0 1 2 3 Topt=85°C 25°C -40°C 4 5 6 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] 21 R3130N×××A/C, R3131N×××A/C 2) Detector Threshold vs. Temperature R3130N26××3 R3131N26××3 Detector Threshold -VDET[V] Detector Threshold -VDET[V] R3130N29××3 R3131N29××3 2.99 2.97 2.95 2.93 2.91 2.89 2.87 -50 -25 0 25 50 75 100 2.67 2.65 2.63 2.61 2.59 2.57 -50 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N30××8 R3131N30××8 Detector Threshold -VDET[V] Detector Threshold -VDET[V] R3130N40×× R3131N40×× 4.08 4.06 4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 3.13 3.11 3.09 3.07 3.05 3.03 3.01 -50 -25 0 25 50 75 100 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N44×× R3131N44×× 4.45 4.43 4.41 4.39 4.37 4.35 4.33 4.31 4.29 -50 4.69 4.67 4.65 4.63 4.61 4.59 4.57 4.55 4.53 -50 R3130N46××5 R3131N46××5 Detector Threshold -VDET[V] Detector Threshold -VDET[V] -25 0 25 50 75 100 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] 22 R3130N×××A/C, R3131N×××A/C 3) Nch Driver Output Current vs. VDS R3130N26××3 10 Nch Driver Output Current IOUT[mA] R3130N29××3 10 VDD=2.0V Nch Driver Output Current IOUT[mA] VDD=2.0V 8 6 4 2 0 0.0 1.0V 0.5 1.0 VDS[V] 1.5 2.0 8 6 4 2 0 0.0 1.0V 0.5 1.0 VDS[V] 1.5 2.0 R3130N30××8 10 Nch Driver Output Current IOUT[mA] Nch Driver Output Current IOUT[mA] R3130N40×× 20 VDD=2.0V VDD=3.0V 15 10 5 1.0V 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 8 6 4 2 1.0V 0 0.0 0.5 1.0 VDS[V] 2.0V 1.5 2.0 R3130N44×× 20 Nch Driver Output Current IOUT[mA] Nch Driver Output Current IOUT[mA] R3130N46××5 3.0V 20 15 10 5 1.0V 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 VDD=4.0V 3.0V VDD=4.0V 15 10 5 1.0V 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 2.0V 2.0V 23 R3130N×××A/C, R3131N×××A/C R3131N26××3 20 Nch Driver Output Current IOUT[mA] R3131N29××3 20 VDD=3.0V Nch Driver Output Current IOUT[mA] 6.0V 4.0V 6.0V 4.0V VDD=3.0V 5.0V 15 10 5 0 0.0 5.0V 15 10 5 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 R3131N30××8 20 Nch Driver Output Current IOUT[mA] Nch Driver Output Current IOUT[mA] R3131N40×× 20 15 10 5 0 0.0 6.0V VDD=5.0V 6.0V VDD=4.0V 5.0V 15 10 5 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 R3131N44×× 20 Nch Driver Output Current IOUT[mA] Nch Driver Output Current IOUT[mA] R3131N46××5 20 15 10 5 0 0.0 6.0V VDD=5.0V 6.0V VDD=5.0V 15 10 5 0 0.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 0.5 1.0 1.5 VDS[V] 2.0 2.5 3.0 24 R3130N×××A/C, R3131N×××A/C 4) Nch Driver Output Current vs. Input Voltage R3130N26××3 10 9 8 7 6 5 4 3 2 1 0 VDS=0.5V Nch Driver Output Current IOUT[mA] Nch Driver Output Current IOUT[mA] R3130N29××3 10 9 8 7 6 5 4 3 2 1 0 VDS=0.5V Topt=-40°C 25°C 85°C Topt=-40°C 25°C 85°C 0 0.5 1 1.5 2 2.5 3 0 0.5 1 1.5 2 2.5 3 Input Voltage VIN[V] Input Voltage VIN[V] R3130N30××8 12 Nch Driver Output Current IOUT[mA] R3130N40×× VDS=0.5V Nch Driver Output Current IOUT[mA] 10 8 6 4 2 0 0 0.5 1 1.5 Topt=-40°C 25°C 12 10 8 6 4 2 0 0 1 2 VDS=0.5V Topt=-40°C 25°C 85°C 85°C 2 2.5 3 3.5 3 4 5 Input Voltage VIN[V] Input Voltage VIN[V] R3130N44×× 14 Nch Driver Output Current IOUT[mA] R3130N46××5 14 Nch Driver Output Current IOUT[mA] 12 10 8 6 4 2 0 0 1 2 VDS=0.5V Topt=-40°C 25°C 12 10 8 6 4 2 0 0 1 VDS=0.5V Topt=-40°C 25°C 85°C 85°C 3 4 5 2 3 4 5 Input Voltage VIN[V] Input Voltage VIN[V] 25 R3130N×××A/C, R3131N×××A/C R3131N26××3 25°C R3131N29××3 Nch Driver Output Current IOUT[mA] VDS=0.5V Topt=-40°C Nch Driver Output Current IOUT[mA] 16 14 12 10 8 6 4 2 0 16 14 12 10 8 6 4 2 0 VDS=0.5V Topt=-40°C 25°C 85°C 85°C 0 1 2 3 4 5 6 0 1 2 3 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] R3131N30××8 Nch Driver Output Current IOUT[mA] R3131N40×× Nch Driver Output Current IOUT[mA] 16 14 12 10 8 6 4 2 0 VDS=0.5V Topt=-40°C 25°C 16 14 12 10 8 6 4 2 0 VDS=0.5V Topt=-40°C 25°C 85°C 85°C 0 1 2 3 4 5 6 0 1 2 3 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] R3131N44×× Nch Driver Output Current IOUT[mA] R3131N46××5 Nch Driver Output Current IOUT[mA] 16 14 12 10 8 6 4 2 0 VDS=0.5V Topt=-40°C 25°C 85°C 16 14 12 10 8 6 4 2 0 VDS=0.5V Topt=-40°C 25°C 85°C 0 1 2 3 4 5 6 0 1 2 3 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] 26 R3130N×××A/C, R3131N×××A/C 5) Pch Driver Output Current vs. Input Voltage R3130N26××3 12 12 VDS=-2.1V 10 8 6 4 2 0 0 1 2 3 4 5 6 -1.0V -0.5V -1.5V R3130N29××3 Pch Driver Output Current IOUT[mA] VDS=-2.1V 10 8 6 4 2 0 0 1 2 3 4 5 6 -1.0V -0.5V -1.5V Pch Driver Output Current IOUT[mA] Input Voltage VIN[V] Input Voltage VIN[V] R3130N30××8 12 12 R3130N40×× Pch Driver Output Current IOUT[mA] VDS=-2.1V VDS=-2.1V 10 8 6 4 2 0 0 1 2 3 4 5 6 -1.0V -0.5V -1.5V Pch Driver Output Current IOUT[mA] 10 8 6 4 2 0 0 1 2 3 -1.5V -1.0V -0.5V 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] R3130N44×× 12 Pch Driver Output Current IOUT[mA] R3130N46××5 12 VDS=-2.1V Pch Driver Output Current IOUT[mA] VDS=-2.1V 10 8 6 4 2 0 0 1 2 3 4 5 6 -1.0V -0.5V -1.5V 10 8 6 4 2 0 0 1 2 3 -1.5V -1.0V -0.5V 4 5 6 Input Voltage VIN[V] Input Voltage VIN[V] 27 R3130N×××A/C, R3131N×××A/C R3131N26××3 4 5 VDS=-2.1V 3 2 1 0 -0.5V -1.5V -1.0V Pch Driver Output Current IOUT[mA] R3131N29××3 VDS=-2.1V 4 -1.5V 3 2 1 0 0 1 2 3 -1.0V -0.5V Pch Driver Output Current IOUT[mA] 0 0.5 1 1.5 2 2.5 3 4 Input Voltage VIN[V] Input Voltage VIN[V] R3131N30××8 5 R3131N40×× -1.5V -1.0V -0.5V Pch Driver Output Current IOUT[mA] Pch Driver Output Current IOUT[mA] VDS=-2.1V 4 3 2 1 0 0 1 2 3 8 7 6 5 4 3 2 1 0 VDS=-2.1V -1.5V -1.0V -0.5V 4 0 1 2 3 4 5 Input Voltage VIN[V] Input Voltage VIN[V] R3131N44×× 10 10 R3131N46××5 VDS=-2.1V Pch Driver Output Current IOUT[mA] Pch Driver Output Current IOUT[mA] VDS=-2.1V 8 6 4 2 0 0 1 2 3 4 -1.5V -1.0V -0.5V 8 6 4 2 0 0 1 2 3 4 -1.5V -1.0V -0.5V 5 5 Input Voltage VIN[V] Input Voltage VIN[V] 28 R3130N×××A/C, R3131N×××A/C 6) Output Delay Time at Detection Mode vs. Temperature R3130N26××3 Output Delay Time at Detection Mode Trst[µs] 50 40 30 20 10 0 -50 -25 0 25 50 75 100 R3130N29××3 Output Delay Time at Detection Mode Trst[µs] R3131N26××3 R3131N29××3 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N30××8 R3131N30××8 Output Delay Time at Detection Mode Trst[µs] 50 40 30 20 10 0 -50 -25 0 25 50 75 100 R3130N40×× R3131N40×× Output Delay Time at Detection Mode Trst[µs] 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N44×× Output Delay Time at Detection Mode Trst[µs] R3130N46××5 Output Delay Time at Detection Mode Trst[µs] R3131N44×× 50 40 30 20 10 0 -50 -25 0 25 50 75 100 R3131N46××5 50 40 30 20 10 0 -50 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] 29 R3130N×××A/C, R3131N×××A/C 7) Power-on Reset Delay Time vs. Temperature R3130N××A× R3131N××A× Power-on Reset Delay Time Tdelay[ms] Power-on Reset Delay Time Tdelay[ms] R3130N××B× R3131N××B× 140 120 100 80 60 -50 75 65 55 45 35 -50 -25 0 25 50 75 100 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N××D× R3131N××D× Power-on Reset Delay Time Tdelay[ms] Power-on Reset Delay Time Tdelay[ms] R3130N××E× R3131N××E× 360 320 280 240 200 -50 250 225 200 175 150 -50 -25 0 25 50 75 100 -25 0 25 50 75 100 Temperature Topt[°C] Temperature Topt[°C] R3130N××H× R3131N××H× Power-on Reset Delay Time Tdelay[ms] 500 450 400 350 300 -50 -25 0 25 50 75 100 Temperature Topt[°C] 30 R3130N×××A/C, R3131N×××A/C TECHNICAL NOTES VDD R VDD R313×N Series GND VDD R1 VDD R2 OUT R313×N Series GND OUT Figure A Figure B As shown wiring in Figure A and Figure B may cause unstable operation by through-type current at detection of all types of R313×N Series. And Detector Threshold may shift because of voltage drop by consumption current of this IC itself. PACKAGE DIMENSIONS 0.4 0.65 0.8 1.5 2.8 0 to 0.1 0.65 (0.95) (0.95) 1.9 2.9 0.16 1.1 Unit : mm 31