R5322N SERIES
120mA 2ch LDO REGULATORS
NO.EA-077-0606
OUTLINE
The R5322N Series are voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection by CMOS process. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting Output Voltage, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage due to built-in transistor with low ON resistance, and a chip enable function and prolong the battery life of each system. The line transient response and load transient response of the R5322N Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is internally fixed with high accuracy. Since the package for these ICs is SOT-23-6W package, and include 2ch LDO regulators each, high density mounting of the ICs on boards is possible.
FEATURES
• • • • • • • • • • • Ultra-Low Supply Current.............................................. Typ. 75µA (VR1, VR2) Standby Current ............................................................ Typ. 0.1µA (VR1, VR2) Output Voltage ..............................................................1.5V to 4.0V Low Dropout Voltage..................................................... Typ. 0.15V (IOUT=100mA ,VOUT=3.0V) High Ripple Rejection ................................................... Typ. 75dB (f=1kHz) High Output Voltage Accuracy ...................................... ±2.0% Low Temperature-Drift Coefficient of Output Voltage.... Typ. ±100ppm/°C Excellent Line Regulation ............................................. Typ.0.05%/V Small Packages .......................................................... SOT-23-6W Built-in chip enable circuit (A/B: active high) Built-in fold-back protection circuit ................................ Typ. 40mA (Current at short mode)
APPLICATIONS
• Power source for cellular phones such as GSM, CDMA and various kinds of PCS. • Power source for electrical appliances such as cameras, VCRs and camcorders. • Power source for battery-powered equipment.
1
R5322N
BLOCK DIAGRAMS
R5322NxxxA
CE1 1
6 VOUT1
Error Amp. Vref Current Limit
R1_1
R2_1
VDD 2
R1_2 Error Amp. Vref
5 GND
R2_2 Current Limit
CE2 3
4 VOUT2
R5322NxxxB
CE1 1
6 VOUT1
Error Amp. Vref Current Limit
R1_1
R2_1
VDD 2
R1_2 Error Amp. Vref Current Limit
5 GND
R2_2
CE2 3
4 VOUT2
2
R5322N
SELECTION GUIDE
The output voltage, mask option, and the taping type for the ICs can be selected at the user’s request. The selection can be made with designating the part number as shown below;
R5322Nxxxx-xx-x ←Part Number
↑↑ ↑ ↑ ab cd Code Contents
a
b c d
Setting combination of 2ch Output Voltage (VOUT) : Serial Number for Voltage Setting, Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is possible for each channel. Designation of Mask Option : A Version: without auto discharge function at OFF state. B Version: with auto discharge function at OFF state. Designation of Taping Type : Ex. TR (refer to Taping Specifications; TR type is the standard direction.) Designation of Composition of pin plating. -F : Lead free plating
3
R5322N
PIN CONFIGURATION
6
SOT-23-6W 5 4
VOUT1
GND VOUT2
(mark side) CE1 VDD CE2
1
2
3
PIN DESCRIPTIONS
•
SOT-23-6W
Pin No Symbol Pin Description
1 2 3 4 5 6
CE1 VDD CE2 VOUT2 GND VOUT1
Chip Enable Pin 1 Input Pin Chip Enable Pin 2 Output Pin 2 Ground Pin Output Pin 1
ABSOLUTE MAXIMUM RATINGS
Symbol Item Rating Unit
VIN VCE VOUT IOUT1 IOUT2 PD Topt Tstg
Input Voltage Input Voltage (CE Pin) Output Voltage Output Current 1 Output Current 2 Power Dissipation (SOT-23-6W) * Operating Temperature Range Storage Temperature Range
Note1
6.5
−0.3 to VIN + 0.3 −0.3 to VIN + 0.3
V V V mA mA mW
°C °C
130 130 430
−40 to 85 −55 to 125
Note1: For Power Dissipation please refer to PACKAGE INFORMATION to be described.
4
R5322N
ELECTRICAL CHARACTERISTICS
•
R5322NxxxA/B
Topt=25°C
Symbol
Item
Conditions
Min. ×0.98
Typ.
Max. ×1.02
Unit
VOUT IOUT
∆VOUT/∆IOUT
Output voltage Output Current Load regulation Dropout Voltage Supply Current Supply Current (Standby) Line regulation
VIN=Set VOUT+1V, 1mA < IOUT < 30mA = = VIN−VOUT=1.0V
V mA mV
120
VDIF ISS Istandby
∆VOUT/∆VIN
VIN=Set VOUT+1V, 12 40 1mA < IOUT < 120mA = = Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE VIN=Set VOUT+1V VIN=VCE=Set VOUT+1V Set VOUT+0.5V VIN 6.0V IOUT=30mA (In case that VOUT < 1.6, = 2.2V < VIN < 6.0)) = = f=1kHz,Ripple 0.5Vp-p, VIN=Set VOUT+1V,IOUT=30mA 2.2 IOUT=30mA −40°C < Topt = VOUT=0V 1.5 1.5 0.0 BW=10Hz to 100kHz VCE=0V 30 70
< = < = < =
75 0.1 0.05
150 1.0 0.20
µA µA
%/V
RR VIN
∆VOUT/ ∆Topt
Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Short Current Limit CE Pull-down Resistance CE Input Voltage “H” CE Input Voltage “L” Output Noise Low Output Nch Tr. ON Resistance (of B version)
75 6.0
±100
dB V ppm /°C mA 16.0 VIN 0.3 MΩ V V
µVrms Ω
85°C
Ilim RPD VCEH VCEL en RLOW
40 4.0
•
Electrical Characteristics by Output Voltage
Output Voltage VOUT (V) Dropout Voltage VDIF(V) Condition Typ. Max.
1.5V 1.7V 1.9V 2.1V 2.8V
< = < = < = < = < =
VOUT < 1.6V VOUT < 1.8V VOUT < 2.0V VOUT < 2.7V VOUT < 4.0V IOUT = 120mA
0.36 0.30 0.28 0.24 0.18
0.70 0.50 0.45 0.40 0.30
5
R5322N
TYPICAL APPLIATION
IN C1
3 CE2 VOUT2 4 R5322N Series 2 VDD GND 5 1 CE1
OUT2 C3
VOUT1 6 C2
OUT1
(External Components) Output Capacitor; Tantalum Type
6
R5322N
TEST CIRCUIT
3 CE2
VOUT2 4 R5322N Series 2 VDD GND 5
C3
VOUT2 V
IOUT2
3 CE2
ISS A IOUT1
VOUT2 4 R5322N Series 2 VDD GND 5
C3
C1
1 CE1
VOUT1 6
C2
VOUT1 V
C1
1 CE1
VOUT1 6
C2
C1= Tantal 1.0µF C2= C3=Tantal 2.2µF
Fig.1 Standard test Circuit
C1= 1.0µF C2= C3=2.2µF
Fig.2 Supply Current Test Circuit
3 CE2
3 CE2
VOUT2 4 R5322N Series 2 VDD GND 5
Pulse Generator
C3
IOUT2
VOUT2 4 R5322N Series 2 VDD GND 5
C3 IOUT2a IOUT2b IOUT1b IOUT1a C2
PG
1 CE1
VOUT1 6
C2
IOUT1
C1
1 CE1
VOUT1 6
C2= C3=2.2µF
Fig.3 Ripple Rejection, Line Transient Response Test Circuit
C1= 1.0µF C2= C3=2.2µF
Fig.4 Load Transient Response Test Circuit
7
R5322N
TYPICAL CHARACTERISTICS
1) Output Voltage vs. Output Current
1.5V (VR1)
1.6
Output Voltage VOUT(V)
1.6
1.5V (VR2)
VIN=2.0V
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=1.8V VIN=3.5V VIN=2.5V VIN=2.0V
1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.00
VIN=1.8V VIN=3.5V
VIN=2.5V
0.10
0.20
0.30
Output Current IOUT(A)
Output Voltage VOUT(V)
1.4
Output Current IOUT(A)
2.8V (VR1)
3.0 3.0 VIN=3.1V VIN=3.3V VIN=4.8V 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=3.5V
2.8V (VR2)
Output Voltage VOUT(V)
2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=3.5V VIN=3.1V VIN=3.3V VIN=4.8V
Output Voltage VOUT(V)
2.5 2.0
Output Current IOUT(A)
Output Current IOUT(A)
4.0V (VR1)
4.5 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 VIN=5.0V VIN=4.3V VIN=4.5V VIN=6.0V
4.0V (VR2)
4.5
Output Voltage VOUT(V)
Output Voltage VOUT(V)
4.0
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.00 0.05
VIN=4.3V VIN=4.5V VIN=6.0V
VIN=5.0V
0.10
0.15
0.20
0.25
0.30
Output Current IOUT(A)
Output Current IOUT(A)
8
R5322N
2) Output Voltage vs. Input Voltage
1.5V (VR1)
1.6 1.6
1.5V (VR2)
Output Voltage VOUT(V)
1.5 1.4 1.3 IOUT=1mA 1.2 1.1 1.0 1 2 3 4 IOUT=30mA IOUT=50mA
Output Voltage VOUT(V)
1.5 1.4 1.3 IOUT=1mA 1.2 1.1 1.0 1 2 3 4 IOUT=30mA IOUT=50mA
5
6
5
6
Input Voltage VIN(V)
Input Voltage VIN(V)
2.8V (VR1)
2.9 2.9
2.8V (VR2)
Output Voltage VOUT(V)
2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6
Output Voltage VOUT(V)
2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6
Input Voltage VIN(V)
Input Voltage VIN(V)
4.0V (VR1)
4.2 4.2
4.0V (VR2)
Output Voltage VOUT(V)
4.0 3.8 3.6 3.4 3.2 3.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6
Output Voltage VOUT(V)
4.0 3.8 3.6 3.4 3.2 3.0 1 2 3 4 IOUT=1mA IOUT=30mA IOUT=50mA 5 6
Input Voltage VIN(V)
Input Voltage VIN(V)
9
R5322N
3) Dropout Voltage vs. Temperature
1.5V (VR1)
1.00 1.00
1.5V (VR2)
Dropout Voltage VDIF(V)
Topt=85°C 25°C -40°C
Dropout Voltage VDIF(V)
0.80 0.60 0.40 0.20 0.00
Topt=85°C 25°C -40°C
0.80 0.60 0.40 0.20 0.00
0
20
40
60
80
100
120
0
20
40
60
80
100
120
Output Current IOUT(mA)
Output Current IOUT(mA)
2.8V (VR1)
0.40 0.40
2.8V (VR2)
Dropout Voltage VDIF(V)
0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 40 60 80 100 120 Topt=85°C 25°C -40°C
Dropout Voltage VDIF(V)
0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20
Topt=85°C 25°C -40°C
40
60
80
100
120
Output Current IOUT(mA)
Output Current IOUT(mA)
4.0V (VR1)
0.40
4.0V (VR2)
0.40
Dropout Voltage VDIF(V)
0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20
Dropout Voltage VDIF(V)
0.35
Topt=85°C 25°C -40°C
0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20
Topt=85°C 25°C -40°C
40
60
80
100
120
40
60
80
100
120
Output Current IOUT(mA)
Output Current IOUT(mA)
10
R5322N
4) Output Voltage vs. Temperature
1.5V (VR1)
1.54 VIN=2.5V IOUT=30mA 1.54 1.53 1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 100 1.53 1.52 1.51 1.50 1.49 1.48 1.47 1.46 -50 -25 0 25 50 75 100
1.5V (VR2)
VIN=2.5V IOUT=30mA
Output Voltage VOUT(V)
Temperature Topt(°C)
Output Voltage VOUT(V)
Temperature Topt(°C)
2.8V (VR1)
2.86 VIN=3.8V IOUT=30mA 2.86
2.8V (VR2)
VIN=3.8V IOUT=30mA
Output Voltage VOUT(V)
2.84 2.82 2.80 2.78 2.76 2.74 -50 -25 0 25 50 75 100
Output Voltage VOUT(V)
2.84 2.82 2.80 2.78 2.76 2.74 -50 -25 0 25 50 75 100
Temperature Topt(°C)
Temperature Topt(°C)
4.0V (VR1)
4.08 VIN=5.0V IOUT=30mA
4.08
4.0V (VR2)
VIN=5.0V IOUT=30mA
Output Voltage VOUT(V)
4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 -25 0 25 50 75 100
Output Voltage VOUT(V)
4.06
4.06 4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 -25 0 25 50 75 100
Temperature Topt(°C)
Temperature Topt(°C)
11
R5322N
5) Supply Current vs. Input Voltage
1.5V
100 100
2.8V
Supply Current ISS(µA)
Supply Current ISS(µA)
80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6
80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6
Input Voltage VIN(V)
Input Voltage VIN(V)
4.0V
100
Supply Current ISS(µA)
80 60 40 VR1 20 VR2 0 0 1 2 3 4 5 6
Input Voltage VIN(V)
6)
Supply Current vs. Temperature
1.5V (VR1)
100 VIN=2.5V
1.5V (VR2)
100
Supply Current ISS(µA)
VIN=2.5V
Supply Current ISS(µA)
80 60 40 20 0 -50
80 60 40 20 0 -50
0
50
100
0
50
100
Temperature Topt(°C)
Temperature Topt(°C)
12
R5322N
2.8V (VR1)
100 VIN=3.8V 100
2.8V (VR2)
VIN=3.8V
Supply Current ISS(µA)
Supply Current ISS(µA)
80 60 40 20 0 -50
80 60 40 20 0 -50
-25
0
25
50
75
100
-25
0
25
50
75
100
Temperature Topt(°C)
Temperature Topt(°C)
4.0V (VR1)
100 VIN=5.0V 100
4.0V (VR2)
VIN=5.0V
Supply Current ISS(µA)
80 60 40 20 0 -50
Supply Current ISS(µA)
50 75 100
80 60 40 20 0 -50
-25
0
25
-25
0
25
50
75
100
Temperature Topt(°C)
Temperature Topt(°C)
7)
Dropout Voltage vs. Set Output Voltage
VR1
0.70
VR2
0.70
Dropout Voltage VDIF(V)
IOUT=10mA 30mA 50mA 120mA
Dropout Voltage VDIF(V)
0.60 0.50 0.40 0.30 0.20 0.10 0.00 1.0 2.0
0.60 0.50 0.40 0.30 0.20 0.10 0.00 1.0 2.0
IOUT=10mA 30mA 50mA 120mA
3.0
4.0
3.0
4.0
Output Voltage VOUT(V)
Output Voltage VOUT(V)
13
R5322N
8) Ripple Rejection vs. Frequency
1.5V (VR1)
90
Ripple Rejection RR(dB)
1.5V (VR2)
90 VIN=2.5V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C
VIN=2.5V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C
Ripple Rejection RR(dB)
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
1.5V (VR1)
90 VIN=2.5V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C 90
1.5V (VR2)
VIN=2.5V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C
Ripple Rejection RR(dB)
Ripple Rejection RR(dB)
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
2.8V (VR1)
90 VIN=3.8V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C
2.8V (VR2)
90
Ripple Rejection RR(dB)
VIN=3.8V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C
Ripple Rejection RR(dB)
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
14
R5322N
2.8V (VR1)
90 VIN=3.8V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C 90
2.8V (VR2)
VIN=3.8V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C
Ripple Rejection RR(dB)
70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Ripple Rejection RR(dB)
80
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
4.0V (VR1)
90 VIN=5.0V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C 90
4.0V (VR2)
VIN=5.0V+0.5Vp-p COUT=tantal 1.0µF Topt=25°C
Ripple Rejection RR(dB)
Ripple Rejection RR(dB)
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
4.0V (VR1)
90 VIN=5.0V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C 90
4.0V (VR2)
VIN=5.0V+0.5Vp-p COUT=tantal 2.2µF Topt=25°C
Ripple Rejection RR(dB)
Ripple Rejection RR(dB)
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
80 70 60 50 40 30 20 10 0 0.1 1 10 IOUT=1mA IOUT=30mA IOUT=50mA 100
Frequency f(kHz)
Frequency f(kHz)
15
R5322N
9) Ripple Rejection vs. Input Voltage (DC bias)
2.8V (VR1)
100 COUT=tantal 2.2µF IOUT=1mA 100
2.8V (VR2)
COUT=tantal 2.2µF IOUT=1mA
Ripple Rejection RR(dB)
Ripple Rejection RR(dB)
80 60 40 20 0 2.9
80 60 40 20 0 2.9
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
2.8V (VR1)
100 COUT=tantal 2.2µF IOUT=30mA 100
2.8V (VR2)
COUT=tantal 2.2µF IOUT=30mA
Ripple Rejection RR(dB)
80 60 40 20 0 2.9
Ripple Rejection RR(dB)
80 60 40 20 0 2.9
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
2.8V (VR1)
100 COUT=tantal 2.2µF IOUT=50mA
2.8V (VR2)
100
Ripple Rejection RR(dB)
COUT=tantal 2.2µF IOUT=50mA
Ripple Rejection RR(dB)
80 60 40 20 0 2.9
80 60 40 20 0 2.9
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
f=1kHz f=10kHz f=100kHz 3.0 3.1 3.2 3.3
Input Voltage VIN(V)
Input Voltage VIN(V)
16
R5322N
10) Input Transient Response
R5322N001x (2.8V, VR1)
2.84 IOUT=30mA COUT=tantal 1.0µF tr/tf=5µs Topt=25°C Input Voltage 6.0
Output Voltage VOUT(V)
2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90
4.0 3.0 2.0 1.0 0.0 100
R5322N001x (2.8V, VR1)
2.84 IOUT=30mA COUT=tantal 2.2µF tr/tf=5µs Topt=25°C Input Voltage 6.0
Output Voltage VOUT(V)
2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90
4.0 3.0 2.0 1.0 0.0 100
R5322N001x (2.8V, VR1)
2.84 IOUT=30mA COUT=tantal 6.8µF tr/tf=5µs Topt=25°C Input Voltage 6.0
Output Voltage VOUT(V)
2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90
4.0 3.0 2.0 1.0 0.0 100
Input Voltage VIN(V)
2.83
5.0
Input Voltage VIN(V)
2.83
5.0
Input Voltage VIN(V)
2.83
5.0
17
R5322N
R5322N001x (2.8V, VR2)
2.84 Input Voltage IOUT=30mA COUT=tantal 1.0µF tr/tf=5µs Topt=25°C 6.0
Output Voltage VOUT(V)
2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90
4.0 3.0 2.0 1.0 0.0 100
R5322N001x (2.8V, VR2)
2.84 Input Voltage IOUT=30mA COUT=tantal 2.2µF tr/tf=5µs Topt=25°C 6.0
Output Voltage VOUT(V)
2.82 2.81 Output Voltage 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90
4.0 3.0 2.0 1.0 0.0 100
R5322N001x (2.8V, VR2)
2.84 IOUT=30mA COUT=tantal 6.8µF tr/tf=5µs Topt=25°C Input Voltage 6.0
Output Voltage VOUT(V)
2.82 2.81 2.80 2.79 2.78 0 10 20 30 40 50 Time t(µs) 60 70 80 90 Output Voltage
4.0 3.0 2.0 1.0 0.0 100
18
Input Voltage VIN(V)
2.83
5.0
Input Voltage VIN(V)
2.83
5.0
Input Voltage VIN(V)
2.83
5.0
R5322N
11) Load Transient Response
R5322N001x (VR1=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 1.0µF tr/tf=5µs Topt=25°C IOUT1 150
VOUT2 0 2 4 6 8 Time t(µs) 10
IOUT2=30mA 12 14 16 18
R5322N001x (VR1=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 2.2µF tr/tf=5µs Topt=25°C IOUT1 150
VOUT2 0 2 4 6 8 Time t(µs) 10
IOUT2=30mA 12 14 16 18
R5322N001x (VR1=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 VOUT1 IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 6.8µF tr/tf=5µs Topt=25°C IOUT1 150
VOUT2 0 2 4 6 8 Time t(µs) 10
IOUT2=30mA 12 14 16 18
Output Current IOUT1(mA)
Output Voltage VOUT(V)
100 50 0
Output Current IOUT1(mA)
Output Voltage VOUT(V)
100 50 0
Output Current IOUT1(mA)
Output Voltage VOUT(V)
100 50 0
19
R5322N
R5322N001x (VR2=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(µs) 10 12 14 16 18 VOUT1 IOUT1=30mA IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 1.0µF tr/tf=5µs Topt=25°C IOUT2 150
VOUT2
R5322N00x (VR2=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(µs) 10 12 14 16 18 VOUT1 IOUT1=30mA IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 2.2µF tr/tf=5µs Topt=25°C IOUT2 150
VOUT2
R5322N00x (VR2=2.8V)
3.00 2.95 2.90 2.85 2.80 2.75 2.70 2.80 2.75 -2 0 2 4 6 8 Time t(µs) 10 12 14 16 18 VOUT1 IOUT1=30mA IOUT=50mA 100mA VIN=3.8V CIN=tantal 1.0µF COUT=tantal 6.8µF tr/tf=5µs Topt=25°C IOUT2 150
VOUT2
20
Output Current IOUT2(mA)
Output Voltage VOUT(V)
100 50 0
Output Current IOUT2(mA)
Output Voltage VOUT(V)
100 50 0
Output Current IOUT2(mA)
Output Voltage VOUT(V)
100 50 0
R5322N
TECHNICAL NOTES
When using these ICs, consider the following points: In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be sure to use a 2.2µF or more capacitance COUT with good frequency characteristics and ESR (Equivalent Series Resistance) of which is in the range described as follows: The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph. (Note: When a ceramic capacitor is connected to the Output Pin as Output capacitor for phase compensation, the operation might be unstable unless as much as 1W resistor is connected between the capacitor and GND instead of ESR. Test these ICs with as same external components as ones to be used on the PCB.) (1) VIN=3.8V (2) Frequency band: 10Hz to 2MHz (3) Temperature: 25°C
R5322N001x (VR1=2.8V)
100 CIN=Ceramic 1.0µF COUT=Ceramic 2.2µF
100
R5322N001x (VR1=2.8V)
CIN=Ceramic 2.2µF COUT=Ceramic 2.2µF
10
10
ERS1(Ω)
ERS1(Ω)
1
1
0.1
0.1
0.01
0
20
40
60
80
100
120
0.01
0
20
40
60
80
100
120
Output Current IOUT1(mA)
Output Current IOUT1(mA)
21
R5322N
R5322N001x (VR2=2.8V)
100 CIN=Ceramic 1.0µF COUT=Ceramic 2.2µF 100
R5322N001x (VR2=2.8V)
CIN=Ceramic 2.2µF COUT=Ceramic 2.2µF
10
10
ERS2(Ω)
ERS2(Ω)
1
1
0.1
0.1
0.01
0
20
40
60
80
100
120
0.01
0
20
40
60
80
100
120
Output Current IOUT2(mA)
Output Current IOUT2(mA)
• Make VDD and GND line sufficient. When the impedance of these is high, the noise might be picked up or not work correctly. • Connect the capacitor with a capacitance of 1µF or more between VDD and GND as close as possible. • Set external components, especially Output Capacitor, as close as possible to the ICs and make wiring shortest.
22
PACKAGE INFORMATION
PE-SOT-23-6W-0512
•
SOT-23-6W
2.9±0.2 1.9±0.2 (0.95) (0.95) 1.1
Unit: mm
PACKAGE DIMENSIONS
+0.2 −0.1 0.8±0.1 4
6
5
1.8±0.2
2.8±0.3
0 to 0.1
1
2
0.15
TAPING SPECIFICATION
0.3±0.1
∅1.5 0
+0.1
4.0±0.1
2.0±0.05
1 2.0MAX.
2
3 4.0±0.1
3.3
∅1.1±0.1
TR User Direction of Feed
TAPING REEL DIMENSIONS
(1reel=3000pcs)
11.4±1.0 9.0±0.3
13±0.2
21±0.8
0 180 −1.5
2±0.5
+1 60 0
3.2
8.0±0.3
6
5
4
3.5±0.05
1.75±0.1
0.2 MIN.
+0.1 0.4 −0.2
+0.1 −0.075
PACKAGE INFORMATION
PE-SOT-23-6W-0512
POWER DISSIPATION (SOT-23-6W)
This specification is at mounted on board. Power Dissipation (PD) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions Standard Land Pattern Environment Board Material Board Dimensions Copper Ratio Through-hole Measurement Result
(Topt=25°C,Tjmax=125°C)
Mounting on Board (Wind velocity=0m/s) Glass cloth epoxy plactic (Double sided) 40mm × 40mm × 1.6mm Top side : Approx. 50% , Back side : Approx. 50% φ0.5mm × 44pcs
Standard Land Pattern Power Dissipation Thermal Resistance
600
430mW θja=(125−25°C)/0.43W=233°C/W
Power Dissipation PD(mW)
500 430 400 300
On Board
40
100 0 0 25 50 75 85 100 Ambient Temperature (°C) 125 150
Power Dissipation
40
200
Measurement Board Pattern IC Mount Area Unit : mm
RECOMMENDED LAND PATTERN (SOT-23-6W)
0.7 MAX.
1.0
0.95 0.95 1.9
2.4
(Unit: mm)
MARK INFORMATION
ME-R5322N-0310
R5322N SERIES MARK SPECIFICATION • SOT-23-6W
1 3
1 2 3 4
, ,
2 4
: Product Code (refer to Part Number vs. Product Code) : Lot Number
•
Part Number vs. Product Code
Product Code
1 2
Part Number R5322N001B-TR R5322N002B-TR R5322N003B-TR R5322N004B-TR R5322N005B-TR R5322N001A-TR R5322N002A-TR R5322N003A-TR R5322N006B-TR R5322N007B-TR R5322N008B-TR R5322N009B-TR R5322N010B-TR
H H H H H H H H H H H H H
0 1 2 3 4 5 6 7 8 9 A B C
很抱歉,暂时无法提供与“R5322N002A-TR”相匹配的价格&库存,您可以联系我们找货
免费人工找货