RN5VD60AC-TR

VOL TAGE DETECTOR WITH OUTPUT DELAY RN5VD SERIES APPLICATION MANUAL NO.EA-027-0006 VOLTAGE DETECTOR WITH OUTPUT DELAY RN5VD SERIES OUTLINE The RN5VD Series are voltage detector ICs with output delay functions and high detector threshold accuracy and ultra-low supply current by CMOS process, which can be operated at an extremely low voltage and is used,for instance, for system reset. Each of these ICs consists of a voltage reference unit, a comparator, resistors for voltage detection, an output driver, a hysteresis circuit and an output delay generator. The detector threshold is fixed with high accuracy in the IC and requires no adjustment. The RN5VD Series are operable by a lower voltage than that for the R × 5VL Series, and can be driven by a single battery. Two output types, Nch open drain type and CMOS type, are available. Since the package for these ICs are SOT-23-5(Mini-mold)package, high density mounting of the ICs on board is possible. FEATURES • Output Delay ......................................................TYP. 100ms with external capacitor : 0.15µF • Ultra-low supply current ...................................TYP. 1.0µA (RN5VD15× : VDD=3.5V) • Broad Operating Voltage Range .......................0.7V to 10.0V • Detector Threshold ............................................Stepwise setting with a step of 0.1V in the range of 0.9V to 6.0V is ................................................................................possible. (refer to Selection Guide) . • High accuracy detector threshold .....................±2.5% • Low Temperature-Drift Coefficient of Detector Threshold ...........TYP. ±100ppm/˚C • Two Output Types..............................................Nch Open Drain and CMOS • Small Package ....................................................SOT-23-5(Mini-mold) APPLICATIONS • CPU & Logic Circuit Reset • Battery Checker • Window Comparator • Wave Shaping Circuit • Battery Back-Up Circuit • Power Failure Detector 1 R N5VD BLOCK DIAGRAMS • Nch Open Drain Output (RN5VD ×× A) VDD 2 RD + – Vref 3 GND 5 CD • CMOS Output (RN5VD ×× C) 1 OUT VDD 2 RD + – Vref 3 GND 5 CD 1 OUT 2 RN5VD SELECTION GUIDE The detector threshold, the output type, the packing type, and the taping type of RN5VD Series can be designating at the user's request by specifying the part number as follows : RN5VD ×××× – ×× ← Part Number } } ↑ d ↑ ↑↑ a bc Code Contents a Setting Detector Threshold (–VDET) : Stepwise setting with a step of 0.1V in the range of 0.9V to 6.0V is possible. b Designation of Output Type A: Nch Open Drain C: CMOS Designation of Packing Type c A: Taping C: Antistatic bag for samples Designation of Taping Type: Ex. SOT-23-5: TR, TL (refer to Taping Specification) “TR” is prescribed as a standard. d For example, the Product with Detector Threshold 3.5V, Output Type Nch Open Drain and Taping Type TR, is designated by Part Number RN5VD35AA-TR. 3 RN5VD PIN CONFIGURATION • SOT-23-5 5 4 (mark side) 1 2 3 PIN DESCRIPTION Pin No. Symbol Description 1 2 3 4 5 OUT VDD GND NC CD Output Pin Input and power source for device itself Ground Pin No Connection Pin for external capacitor (for setting output delay) 4 RN5VD ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit VDD Supply Voltage CNOS Output Voltage Nch 12 VSS–0.3 to VDD+0.3 V VOUT V VSS–0.3 to 12 70 150 –40 to +85 –55 to +125 260˚C, 10s mA mW ˚C ˚C IOUT PD Topt Tstg Tsolder Output Current Power Dissipation Operating Temperature Range Storage Temperature Range Lead Temperature (Soldering) ABSOLUTE MAXIMUM RATINGS Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under any conditions. Moreover, such values for any two items must not be reached simultaneously. Operation above these absolute maximum ratings may cause degradation or permanent damage to the device. These are stress ratings only and do not necessarily imply functional operation below these limits. 5 R N5VD ELECTRICAL CHARACTERISTICS • RN5VD09A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=0.8V 0.878 0.027 0.900 0.045 1.5 0.9 0.922 0.063 3.7 V V µA ISS Supply Current VDD=2.9V 2.7 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 0.05 1.0 0.297 2.0 10.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V 0.80 mA VDS=0.5V, VDD=0.85V 0.50 2.0 0.495 30 µA VDS=0.5V, VDD=0.85V 100.0 1.0 2.0 MΩ ppm/˚C 0.693 mA V IOUT Output Current Pch VDS=–2.1V, VDD=4.5V VDD=0.99V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 (Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 6 R N5VD • RN5VD18A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=1.7V 1.755 0.054 1.800 0.090 2.5 1.0 1.845 0.126 5.0 V V µA ISS Supply Current VDD=3.8V 3.0 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 1.0 1.0 0.693 2.0 200.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 0.80 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V mA VDS=0.5V, VDD=1.5V 2.0 2.0 0.990 30 µA VDS=0.5V, VDD=1.5V 800.0 1.0 2.0 MΩ ppm/˚C 1.287 mA V IOUT Output Current Pch VDS=–2.1V, VDD=4.5V VDD=1.98V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 (Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 7 R N5VD • RN5VD27A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=2.6V 2.633 0.081 2.700 0.135 3.5 1.1 2.767 0.189 7.0 V V µA ISS Supply Current VDD=4.7V 3.3 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 1.0 1.0 1.188 2.0 200.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 0.80 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V mA VDS=0.5V, VDD=1.5V 2.0 2.0 1.485 30 µA VDS=0.5V, VDD=1.5V 800.0 1.0 2.0 MΩ ppm/˚C 1.782 mA V IOUT Output Current Pch VDS=–2.1V, VDD=4.5V VDD=2.97V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 ( Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 8 R N5VD • RN5VD36A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=3.47V 3.510 0.108 3.600 0.180 4.5 1.2 3.690 0.252 9.0 V V µA ISS Supply Current VDD=5.6V 3.6 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 1.0 1.0 1.584 2.0 200.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 0.80 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V mA VDS=0.5V, VDD=1.5V 2.0 2.0 1.980 30 µA VDS=0.5V, VDD=1.5V 800.0 1.0 2.0 MΩ ppm/˚C 2.376 mA V IOUT Output Current Pch VDS=–2.1V, VDD=4.5V VDD=3.96V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 (Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 9 R N5VD • RN5VD45A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=4.34V 4.388 0.135 4.500 0.225 5.5 1.3 4.612 0.315 11.0 V V µA ISS Supply Current VDD=6.5V 3.9 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 1.0 1.5 1.980 2.0 200.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 0.80 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V mA VDS=0.5V, VDD=1.5V 2.0 3.0 2.475 30 µA VDS=0.5V, VDD=1.5V 800.0 1.0 2.0 MΩ ppm/˚C 2.970 mA V IOUT Output Current Pch VDS=–2.1V, VDD=8.0V VDD=4.95V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 (Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 10 R N5VD • RN5VD54A/C Topt=25˚C Symbol Item Conditions MIN. TYP. MAX. Unit. –VDET VHYS Detector Threshold Detector Threshold Hysteresis VDD=5.2V 5.265 0.162 5.400 0.270 6.0 1.4 5.535 0.378 12.0 V V µA ISS Supply Current VDD=7.4V 4.2 10 Topt=25˚C –30˚C≤Topt≤85˚C VDS=0.05V, VDD=0.7V Nch 0.01 1.0 1.5 2.376 2.0 200.0 0.5 –30˚C≤Topt≤85˚C 0.55 0.65 0.05 0.70 0.80 VDDH Maximum Operating Voltage Minimum Operating Voltage (Note 1) V VDDL V mA VDS=0.5V, VDD=1.5V 2.0 3.0 2.970 30 µA VDS=0.5V, VDD=1.5V 800.0 1.0 2.0 MΩ ppm/˚C 3.564 mA V IOUT Output Current Pch VDS=–2.1V, VDD=8.0V VDD=5.94V VDS=0.1V, VDD=0.7V VTCD CD pin Threshold Voltage ICD CD pin Sink Current RD ∆–VDET ∆Topt Delay Resistance Detector Threshold Temperature Coefficient ±100 (Note 1) Minimum Operating Voltage means the value of input voltage when output voltage maintains 0.1V or less, provided that in the case of Nch Open Drain Type Products, the pull-up resistance is set at 470kΩ, and the pull-up voltage is set at 5.0V. 11 R N5VD ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD • RN5VD09A/C to RN5VD39A/C Detector Threshold Part Number. –VDET (V) Hysteresis VHYS (V) Supply Current 1 Supply Current 2 Output Current 1 Iss1 (µA) Iss2 (µA) IOUT1 (mA) Output Current 2 IOUT2 (mA) MIN. TYP. MAX. MIN. TYP. MAX. condi- TYP. MAX. condi- TYP. MAX. condi- MIN. TYP. conditions tions tions tions RN5VD09A/C 0.878 0.900 0.922 0.027 0.045 0.063 RN5VD10A/C 0.975 1.000 1.025 0.030 0.050 0.070 RN5VD11A/C 1.073 1.100 1.127 0.033 0.055 0.077 RN5VD12A/C 1.170 1.200 1.230 0.036 0.060 0.084 RN5VD13A/C 1.268 1.300 1.332 0.039 0.065 0.091 RN5VD14A/C 1.365 1.400 1.435 0.042 0.070 0.098 RN5VD15A/C 1.463 1.500 1.537 0.045 0.075 0.105 RN5VD16A/C 1.560 1.600 1.640 0.048 0.080 0.112 RN5VD17A/C 1.658 1.700 1.742 0.051 0.085 0.119 RN5VD18A/C 1.755 1.800 1.845 0.054 0.090 0.126 MIN. TYP. 1.5 1.8 2.0 3.7 4.5 5.0 0.9 2.7 VDD= 0.05 0.85V 0.5 VDD= 0.2 1.0V 1.0 3.0 1.0 2.5 5.0 VDD= (–VDET) RN5VD20A/C 1.950 2.000 2.050 0.060 0.100 0.140 –0.10V RN5VD21A/C 2.048 2.100 2.152 0.063 0.105 0.147 RN5VD19A/C 1.853 1.900 1.947 0.057 0.095 0.133 RN5VD22A/C 2.145 2.200 2.255 0.066 0.110 0.154 RN5VD23A/C 2.243 2.300 2.357 0.069 0.115 0.161 RN5VD24A/C 2.340 2.400 2.460 0.072 0.120 0.168 RN5VD25A/C 2.438 2.500 2.562 0.075 0.125 0.175 RN5VD26A/C 2.535 2.600 2.665 0.078 0.130 0.182 RN5VD27A/C 2.633 2.700 2.767 0.081 0.135 0.189 RN5VD28A/C 2.730 2.800 2.870 0.084 0.140 0.196 RN5VD29A/C 2.828 2.900 2.972 0.087 0.145 0.203 RN5VD30A/C 2.925 3.000 3.075 0.090 0.150 0.210 RN5VD31A/C 3.023 3.100 3.177 0.093 0.155 0.217 RN5VD32A/C 3.120 3.200 3.280 0.096 0.160 0.224 RN5VD33A/C 3.218 3.300 3.382 0.099 0.165 0.231 RN5VD34A/C 3.315 3.400 3.485 0.102 0.170 0.238 VDD= RN5VD35A/C 3.413 3.500 3.587 0.105 0.175 0.245 –0.13V RN5VD36A/C 3.510 3.600 3.690 0.108 0.180 0.252 RN5VD37A/C 3.608 3.700 3.792 0.111 0.185 0.259 RN5VD38A/C 3.705 3.800 3.895 0.114 0.190 0.266 RN5VD39A/C 3.803 3.900 3.997 0.117 0.195 0.273 (Note) Refer to the previously defined “Minimum Operating Voltage”. Condition 1 : Topt=25˚C Condition 2 : –30˚C≤Topt≤85˚C 3.0 6.0 VDD= (–VDET) +2.0V 1.1 Nch VDS= 0.05V 0.01 0.05 VDD= 0.7V Nch VDS= 0.5V VDD= 1.5V 1.0 3.3 3.5 7.0 2.0 4.0 8.0 (–VDET) 1.2 3.6 4.5 9.0 12 R N5VD Topt=25˚C Output Current 3 IOUT3 (mA) Minimum Oper- CD Pin Threshold Voltage ating Voltage VDDL (V) VTCD (V) CD Pin Output Current 1 ICD1 (µA) CD Pin Output Current 2 ICD2 (µA) Delay Resistance RD (MΩ) Detector Threshold Tempco. ∆–VDET (ppm/˚C) ∆Topt TYP. condi- MIN. TYP. TYP. tions MAX. condi- MIN. TYP. MAX. condi- MIN. TYP. conditions tions tions MIN. TYP. MIN. TYP. MAX. conditions VDD × VDD × VDD × 0.3 0.5 0.7 VDD= 0.85V 10 100 VDD= 1.0V VDD × VDD × VDD × 0.35 0.5 0.65 50 200 Pch VDS= –2.1V 1.0 VDD= 4.5V (Note1) (Note1) Condition1 Condition1 0.70 VDD= (–VDET) 2.0 Condition2 Condition2 × 1.1V 0.65 0.80 0.55 VDS = 0.1V VDD = 0.7V 2.0 30 VDS = 0.5V 0.5 1.0 2.0 – 30˚C≤ Topt ≤85˚C ±100 VDD = 1.5V 200 VDD × VDD × VDD × 0.4 0.5 0.6 800 13 R N5VD • RN5VD40A/C to RN5VD60A/C Detector Threshold Part Number. –VDET (V) Hysteresis VHYS (V) Supply Current 1 Supply Current 2 Output Current 1 Iss1 (µA) Iss2 (µA) IOUT1 (mA) Output Current 2 IOUT2 (mA) MIN. TYP. MAX. MIN. TYP. MAX. condi- TYP. MAX. condi- TYP. MAX. condi- MIN. TYP. conditions tions tions tions RN5VD40A/C 3.900 4.000 4.100 0.120 0.200 0.280 RN5VD41A/C 3.998 4.100 4.202 0.123 0.205 0.287 RN5VD42A/C 4.095 4.200 4.305 0.126 0.210 0.294 RN5VD43A/C 4.193 4.300 4.407 0.129 0.215 0.301 RN5VD44A/C 4.290 4.400 4.510 0.132 0.220 0.308 VDD= RN5VD45A/C 4.388 4.500 4.612 0.135 0.225 0.315 –0.16V RN5VD46A/C 4.485 4.600 4.715 0.138 0.230 0.322 RN5VD47A/C 4.583 4.700 4.817 0.141 0.235 0.329 RN5VD48A/C 4.680 4.800 4.920 0.144 0.240 0.336 RN5VD49A/C 4.778 4.900 5.022 0.147 0.245 0.343 RN5VD50A/C 4.875 5.000 5.125 0.150 0.250 0.350 RN5VD51A/C 4.973 5.100 5.227 0.153 0.255 0.357 RN5VD52A/C 5.070 5.200 5.330 0.156 0.260 0.364 RN5VD53A/C 5.168 5.300 5.432 0.159 0.265 0.371 RN5VD54A/C 5.265 5.400 5.535 0.162 0.270 0.378 VDD= RN5VD55A/C 5.363 5.500 5.637 0.165 0.275 0.385 (–VDET) RN5VD56A/C 5.460 5.600 5.740 0.168 0.280 0.392 –0.20V RN5VD57A/C 5.558 5.700 5.842 0.171 0.285 0.399 RN5VD58A/C 5.655 5.800 5.945 0.174 0.290 0.406 RN5VD59A/C 5.753 5.900 6.047 0.177 0.295 0.413 RN5VD60A/C 5.850 6.000 6.150 0.180 0.300 0.420 (Note) Refer to the previously defined “Minimum Operating Voltage”. Condition 1 : Topt=25˚C Condition 2 : –30˚C≤Topt≤85˚C MIN. TYP. 5.0 10.0 (–VDET) 1.3 3.9 5.5 11.0 Nch VDD= (–VDET) +2.0V VDS= 0.05V 0.01 0.05 VDD= 0.7V Nch VDD= 1.0 VDS= 1.5V 0.5V 2.0 6.0 12.0 1.4 4.2 6.5 13.0 14 R N5VD Topt=25˚C Output Current 3 Minimum Oper- CD Pin Threshold Voltage ating Voltage IOUT3 (mA) VDDL (V) VTCD (V) CD Pin Output Current 1 ICD1 (µA) CD Pin Output Current 2 IOUT1 (mA) Delay Resistance IOUT2 (mA) Detector Threshold Tempco. ∆–VDET (ppm/˚C) ∆Topt TYP. condi- MIN. TYP. TYP. tions MAX. condi- MIN. TYP. MAX. condi- MIN. TYP. conditions tions tions MIN. TYP. condi- TYP. MAX. conditions tions Pch VDS= –2.1V 1.5 VDD= 8.0V (Note1) (Note1) Condition1 Condition1 0.55 3.0 0.70 Condition2 Condition2 0.65 0.80 (–VDET) VDD × VDD × VDD × 2.0 × 1.1V 0.4 0.5 0.6V VDD= 0.7V VDD= VDS= 0.1V 30 VDS= VDD= 0.5V 1.5V 200 800 0.5 1.0 2.0 –30˚C≤ Topt ≤85˚C ±100 15 R N5VD OPERATION VDD Current Source Ra Comparator – + Rb Vref Tr.2 Tr.1 Rc GND CD Output Capacitor Nch RD Pch Schmitt Trigger OUT FIG. 1 Block Diagram 1 2 3 4 5 Step Step 1 Step 2 Step 3 Step 4 Step 5 Released Voltage +VDET Detected Voltage –VDET Supply Voltage (VDD) Minimum Operaing Voltage GND B A Detector Threshold Hysteresis Comparator (–) Pin Input Voltage Comparator Output Tr. 1, 2 Output Tr. Nch Pch I L OFF OFF ON II H ON ON OFF II Indefinite Indefinite Indefinite Indefinite II H ON ON OFF I L OFF OFF ON Output Voltage (OUT) Delay Time I. Rb + Rc Ra + Rb + Rc Rb Ra + Rb · VDD · VDD GND II. FIG. 2 Operation Diagram Step 1. Output Voltage is equal to Pull-up Voltage. Step 2. When Input Voltage (VDD) reaches the state of Vref≥VDD · (Rb+Rc) / (Ra+Rb+Rc) at Point A (Detected Voltage –VDET) , the output of Comparator is reversed, so that Output Voltage becomes GND. Discharging is performed from CD pin connected to External Capacitor. No delay time is generated. Step 3. Output Voltage becomes indefinite when Power Source Voltage(VDD) is smaller than Minimum Operating Voltage. When the output is pulled up, VDD is output. Step 4. Output Voltage becomes equal to GND. Step 5. When Input Voltage (VDD) reaches the state of Vref ≤VDD · Rb/ (Ra+Rb) at Point B (Released Voltage +VDET) , the output of Comparator is reversed, and the External Capacitor is charged through CD pin, so that Output Voltage becomes equal to Pulled-up Voltage after a delay time tD (=0.69× 106× CD) . 16 R N5VD • Output Delay Operation Supply Voltage (VDD) Released Voltage (+VDET) CD pin Voltage CD pin Threshold Voltage (VTCD) GND Output Voltage (OUT) GND Output Delay Time (tD) When the Supply Voltage crosses the Released Voltage (+VDET) from a low value to a value higher than the Released Voltage (+VDET) , the CD pin Voltage starts to increase (starts to charge the external capacitor). The Output Voltage is maintained at “L” level until the CD pin Voltage reaches to VTCD (CD pin Threshold Voltage) after that the Output Voltage is reversed to “H” state. The time period from beginning of charging capacitor to Output Voltage reversing represents the Output Delay (tD) . • Output Delay Time Delay time (tD) can be set accordance with the capacitance CD of external capacitor as below tD=0.69 × 10 6× CD (s) 17 R N5VD TEST CIRCUITS ISS +5V or VDD VDD VIN RN5VD SERIES GND VIN RN5VD SERIES GND OUT VDD 470kΩ FIG. 3 Supply Current test Circuit FIG. 4 Detector Threshold Test Circuit VDD VIN RN5VD SERIES GND OUT VDS IOUT VDD VIN RN5VD××C SERIES GND IOUT OUT VDD+VDS FIG. 5 Nch Driver Output Current Test Circuit FIG. 6 Pch Driver Output Current Test Circuit +5V or VDD VDD VIN CD VDS RN5VD SERIES GND VDD 470kΩ OUT OUT VDS VIN ICD CD RN5VD SERIES GND FIG. 7 CD pin Threshold Voltage Test Circuit FIG. 8 CD pin Sink Current Test Circuit +VDET+2.0V +5V VDD 470kΩ OUT Input Voltage CD VIN 0.7V GND RN5VD SERIES GND CD 100% Output Voltage 50% FIG. 9 Output Delay Time Test Circuit GND tPHL tD *) at FIG.4,7,9. CMOS Output Type does not need a pull-up resistor. 18 R N5VD TYPICAL CHARACTERISTICS 1) Supply Current vs. Input Voltage RN5VD09× 3.0 Supply Current Iss(µA) Supply Current Iss(µA) 2.5 2.0 1.5 1.0 0.5 0 0 2 4 6 8 10 Input Voltage VIN(V) 5 4 3 2 1 0 0 2 4 6 8 Input Voltage VIN(V) 10 Topt=80˚C 25˚C –30˚C RN5VD27× Topt=80˚C 25˚C –30˚C RN5VD45× 8 7 Supply Current Iss(µA) 6 5 4 3 2 1 0 0 2 4 6 8 10 Input Voltage VIN(V) –30˚C 25˚C Topt=80˚C 2) Detector Threshold vs. Temperature 0.98 Detector Threshold VDET(V) 0.96 0.94 0.92 0.90 0.88 0.86 –40 –VDET +VDET RN5VD09× Detector Threshold VDET(V) 2.90 2.85 2.80 2.75 2.70 2.65 2.60 –40 RN5VD27× +VDET –VDET –20 0 20 40 60 Temperature Topt(˚C) 80 –20 0 20 40 60 Temperature Topt(˚C) 80 19 R N5VD RN5VD45× 4.9 Detector Threshold VDET(V) 4.8 +VDET 4.7 4.6 –VDET 4.5 4.4 –40 –20 0 20 40 Temperature Topt(˚C) 60 80 3) Output Voltage vs. Input Voltage RN5VD09A VDD Pull-up 470kΩ 1.0 Output Voltage VOUT(V) 0.8 0.6 0.4 0.2 0 0 0.2 6 Output Voltage VOUT(V) 5 RN5VD09A 5V Pull-up 470kΩ Topt=80˚C 4 25˚C –30˚C Topt=80˚C 25˚C –30˚C 3 2 1 0 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 1.0 Input Voltage VIN(V) Input Voltage VIN(V) 3.0 Output Voltage VOUT(V) 2.5 2.0 1.5 1.0 RN5VD27A VDD Pull-up 470kΩ RN5VD27A 6 Output Voltage VOUT(V) 5 5V Pull-up 470kΩ Topt=–30˚C 4 25˚C 3 2 1 0 80˚C Topt= –30˚C 0.5 0 0 0.5 25˚C 80˚C 1.0 1.5 2.0 Input Voltage VIN(V) 2.5 3.0 0 0.5 1.0 1.5 2.0 Input Voltage VIN(V) 2.5 3.0 20 R N5VD RN5VD45A 5 Output Voltage VOUT(V) 4 3 2 1 0 0 VDD Pull-up 470kΩ RN5VD45A 6 Output Voltage VOUT(V) 5 5V Pull-up 470kΩ Topt= –30˚C 4 3 2 1 0 25˚C 80˚C Topt= –30˚C 25˚C 80˚C 1 2 3 4 5 0 1 2 3 4 5 Input Voltage VIN(V) Input Voltage VIN(V) 4) Nch Driver Output Current vs. VDS 0.45 0.40 Output Currert IOUT(mA) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 0.2 RN5VD09× VDD=0.85V 16 Output Currert IOUT(mA) 14 RN5VD27× VDD=2.5V 12 10 8 6 4 1.5V 2.0V 0.7V 2 0 0.8 1.0 0 0.5 1.0 1.5 VDS(V) 2.0 2.5 0.4 0.6 VDS(V) 40 Output Currert IOUT(mA) 35 30 25 20 15 10 5 0 0 1.5V RN5VD45× VDD=4.0V 3.5V 3.0V 2.5V 2.0V 1 2 VDS(V) 3 4 21 R N5VD 5) Nch Driver Output Current vs. Input Voltage 0.7 Output Current IOUT(mA) 0.6 0.5 0.4 Topt = 80˚C RN5VD09× VDS=0.5V 12 Output Current IOUT(mA) 10 RN5VD27× VDS=0.5V Topt = –30˚C 8 6 4 2 0 25˚C 0.3 0.2 0.1 –30˚C 25˚C 80˚C 0 0 0.2 0.4 0.6 0.8 Input Voltage VIN(V) 1.0 0 0.5 1.0 1.5 2.0 Input Voltage VIN(V) 2.5 3.0 18 Output Current IOUT(mA) 16 14 12 10 8 6 4 2 0 0 1 RN5VD45× VDS=0.5V Topt = – 30˚C 25˚C 80˚C 2 3 Input Voltage VIN(V) 4 5 6) Pch Driver Output Current vs. Input Voltage RN5VD09C 4.0 VDS = –2.1V RN5VD27C 4.0 VDS = –2.1V Output Current IOUT(mA) 3.0 2.5 2.0 1.5 Output Current IOUT(mA) 3.5 –1.5V –1.0V 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 –0.5V –1.0V –1.5V –0.5V 1.0 0.5 0 0 2 4 6 Input Voltage VIN(V) 8 10 0 2 4 6 8 10 Input Voltage VIN(V) 22 R N5VD 4.0 3.5 Output Current IOUT(mA) 3.0 2.5 2.0 1.5 RN5VD45C VDS =–2.1V –1.5V –1.0V –0.5V 1.0 0.5 0 0 2 4 6 Input Voltage VIN(V) 8 10 7) CD pin Threshold Voltage vs. Temperature CD pin Threshold Voltage VTCD(V) 0.7 0.6 0.5 0.4 0.3 0.2 –40 CD pin Threshold Voltage VTCD(V) 0.8 RN5VD09× VDD=0.99V 1.8 1.7 1.6 1.5 1.4 1.3 1.2 –40 RN5VD27× VDD=2.97V –20 0 20 40 Temperature Topt(˚C) 60 80 –20 0 20 40 Temperature Topt(˚C) 60 80 CD pin Threshold Voltage VTCD(V) 2.8 2.7 2.6 2.5 2.4 2.3 2.2 –40 RN5VD45× VDD=4.95V –20 0 20 40 60 Temperature Topt(˚C) 80 23 R N5VD 8) Cd pin Sink Current vs. Input Voltage RN5VD09× 0.18 CD pin Sink Current ICD(mA) CD pin Sink Current ICD(mA) 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 0 0.2 0.4 0.6 0.8 Input Voltage VIN(V) 1.0 Topt = 80˚C 25˚C VDS=0.5V 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.5 RN5VD27× VDS=0.5V Topt = –30˚C 25˚C 80˚C –30˚C 1.0 1.5 2.0 Input Voltage VIN(V) 2.5 3.0 5 CD pin Sink Current ICD(mA) 4 RN5VD45× VDS=0.5V Topt = –30˚C 25˚C 3 2 80˚C 1 0 0 1 2 3 Input Voltage VIN(V) 4 5 9) Cd pin Sink Current vs. Cd pin Voltage RN5VD09× CD pin Sink Current ICD(mA) 0.12 CD pin Sink Current ICD(mA) 0.10 VDD = 0.85V 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0.5 RN5VD27× VDD = 2.5V 0.08 0.06 0.04 0.02 0 0 0.2 0.4 0.6 0.8 CD pin Voltage VCD(V) 1.0 0.7V 2.0V 1.5V 1.0 1.5 2.0 CD pin Voltage VDS(V) 2.5 24 R N5VD 10 CD pin Sink Current ICD(mA) 8 RN5VD45× VDD = 4.0V 3.5V 6 3.0V 4 2.5V 2 0 0 2.0V 1.5V 1 2 3 CD pin Voltage VDS(V) 4 10) Output delay Time vs. External Capacitance 1000 Output Delay Time tP(ms) RN5VD09A 1000 Output Delay Time tP(ms) RN5VD27A 100 10 tD 1 tPHL 0.1 0.01 0.0001 100 10 tD 1 tPHL 0.1 0.01 0.0001 0.001 0.01 0.1 1 External Capacitance CD(µF) 0.001 0.01 0.1 External Capacitance CD(µF) 1 11) Delay Resistance vs. Temperature 1000 Output Delay Time tP(ms) RN5VD45A 1.6 RN5VD××× 100 10 tD 1 tPHL 0.1 0.01 0.0001 Delay Resistance RD(MΩ) 1 1.4 1.2 1.0 0.8 0.6 0.4 –40 0.001 0.01 0.1 External Capacitance CD(µF) –20 0 20 40 60 80 Temperature Topt(˚C) 25 R N5VD TYPICAL APPLICATIONS • RN5VD ×× A CPU Reset Circuit (Nch Open Drain Output) (1) Input Voltage to RN5VD ×× A is the same as the input voltage to CPU. VDD VDD CD RN5VD××A SERIES GND (2) Input Voltage to RN5VD ×× A is different from the input voltage to CPU. VDD1 VDD CD RN5VD××A SERIES GND R VDD RESET OUT CPU VDD2 R OUT VDD RESET CPU CD GND GND CD • RN5VD ×× C CPU Reset Circuit (CMOS Output) VDD VDD CD RN5VD××C SERIES OUT GND VDD RESET CPU GND CD • Memory Back-up Circuit VDD D1 D2 VCC VCC A Y1 Y2 B Y3 G Y4 RAM1 GND CS GND VCC RAM2 GND CS VCC RAM3 GND CS VCC RAM4 GND CS VDD CD CD GND RN5VD××C SERIES OUT 26 R N5VD • Manual Reset Circuit VDD VDD R CD RN5VD××A SERIES GND CD OUT CD GND RN5VD××C SERIES VDD VDD OUT CD APPLICATION HINTS VDD VDD R1 VDD CD RN5VD SERIES GND OUT CD VDD R2 RN5VD SERIES GND OUT FIG.10 FIG.11 1. When RN5VD ×× C (CMOS Output) is used in FIG.10,this IC may oscillate by the through-type current at the detection when impedance is connected between Power Source VDD and RN5VD VDD Pin.When RN5VD ×× A (Nch Open Drain Output) is used in FIG.10, and R becomes excessively large, Detector Threshold may be varied because of the voltage drop of the supply current in the IC itself. 2. The connection as shown in FIG. 11 may cause the oscillation in both RN5VD ×× C (CMOS Output) and RN5VD ×× A (Nch Open Drain Output) 27