0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
RP200K291D-TR

RP200K291D-TR

  • 厂商:

    RICOH(理光)

  • 封装:

    XFDFN6

  • 描述:

    IC REG LIN 2.9V 300MA DFN1212-6

  • 数据手册
  • 价格&库存
RP200K291D-TR 数据手册
RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x SERIES 3-MODE 300mA LDO REGULATOR NO.EA-182-170126 OUTLINE The RP200x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low dropout voltage and low supply current. These ICs perform with the chip enable function and realize a standby mode with ultra low supply current. To prevent the destruction by over current, the current limit circuit is included. The RP200x Series have 3-mode. One is standby mode with CE pin. Other two modes are realized with ECO Function. Fast Response Mode (Fast Mode) and Fast and Low Power auto-change Mode (Auto ECO Mode) are alternative with Auto Eco pin (AE pin). Supply current of IC itself at light load is automatically reduced at Auto ECO Mode compared with Fast Mode. The output voltage is maintained between Fast Mode and Auto ECO Mode. Without AE pin type is also available. It is an LDO regulator with Auto ECO mode. (RP200Z in WLCSP.) Since the packages for these ICs are SOT-23-5, SC-88A, thin DFN(PLP)1212-6, and WLCSP-4-P5, high density mounting of the ICs on boards is possible. RP200Q (SC-88A), RP200K (DFN(PLP)1212-6) and RP200N (SOT-23-5) has AE pin, then if the AE pin is "H", Fast Mode is available. If the AE pin is set at "L" level, Auto ECO Mode operation is available. FEATURES              Supply Current (Low power Mode) .............................. Typ. 1.0A (VOUT1.85V) Supply Current (Fast Mode)......................................... Typ. 55A Supply Current (Standby Mode) .................................. Typ. 0.1A Ripple Rejection ........................................................... Typ. 70dB (f1kHz) Input Voltage Range .................................................... 1.4V to 5.25V Output Voltage Range.................................................. 0.8V to 4.0V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.) Output Voltage Accuracy.............................................. 1.0% (VOUT > 2.0V, Topt25C) Temperature-Drift Coefficient of Output Voltage .......... Typ. 50ppm/C Dropout Voltage ........................................................... Typ. 0.23V (IOUT300mA, VOUT2.8V) Line Regulation ............................................................ Typ. 0.02%/V Packages ..................................................................... WLCSP-4-P5, DFN(PLP)1212-6, SC-88A, SOT-23-5 Built-in Fold Back Protection Circuit ............................ Typ. 50mA (Current at short mode) Ceramic capacitors are recommended ........................ 1.0F APPLICATIONS  Power source for portable communication equipment.  Power source for electrical appliances such as cameras, VCRs and camcorders.  Power source for battery-powered equipment. 1 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 BLOCK DIAGRAMS RP200K/N/QxxxB RP200Zxx1B AE VDD VOUT VDD Vref VOUT Vref Current Limit CE Current Limit GND CE GND RP200K/N/QxxxD RP200Zxx1D AE VDD VOUT VDD Vref Vref Current Limit CE 2 VOUT Current Limit GND CE GND RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 SELECTION GUIDE The output voltage, auto discharge function, and package, etc. for the ICs can be selected at the user’s request. Product Name Package Quantity per Reel Pb Free Halogen Free WLCSP-4-P5 5,000 pcs Yes Yes DFN(PLP)1212-6 5,000 pcs Yes Yes RP200Qxx2-TR-FE SC-88A 3,000 pcs Yes Yes RP200Nxx1-TR-FE SOT-23-5 3,000 pcs Yes Yes RP200Zxx1-TR-F RP200Kxx1-TR xx : The output voltage can be designated in the range from 0.8V(08) to 4.0V(40) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.)  : The auto discharge function at off state are options as follows. (B) without auto discharge function at off state (D) with auto discharge function at off state 3 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 PIN CONFIGURATIONS  WLCSP-4-P5 Bump Side Silicon Side 2 2 1 1 A DFN(PLP)1212-6 B B SC-88A 5 4 A Top View Bottom View 6 5 4 4 5 6 1 2 3 3 2 1  SOT-23-5 5 (mark side) 1 4 2 3 4 (mark side) 1 2 3 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126     WLCSP-4-P5 Pin No Symbol Pin Description A1 VDD Input Pin A2 VOUT Output Pin B1 CE Chip Enable Pin ("H" Active) B2 GND Ground Pin DFN(PLP)1212-6 Pin No Symbol Pin Description 1 AE 2 GND 3 CE Chip Enable Pin ("H" Active) 4 VDD Input Pin 5 NC No Connection 6 VOUT Output Pin Auto ECO Pin Ground Pin SC-88A Pin No Symbol Pin Description 1 AE 2 GND Ground Pin 3 VOUT Output Pin 4 VDD Input Pin 5 CE Chip Enable Pin ("H" Active) Auto ECO Pin SOT-23-5 Pin No Symbol Pin Description 1 VDD 2 GND 3 CE Chip Enable Pin ("H" Active) 4 AE Auto ECO Pin 5 VOUT Output Pin Input Pin Ground Pin 5 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit 6.0 V VIN Input Voltage VCE Input Voltage (CE Pin) 0.3 to 6.0 V VAE Input Voltage (AE Pin) 0.3 to 6.0 V VOUT Output Voltage 0.3 to VIN0.3 V IOUT Output Current 400 mA Power Dissipation (WLCSP-4-P5)  278 Power Dissipation (DFN(PLP)1212-6)  400 Power Dissipation (SC-88A) 380 Power Dissipation (SOT-23-5)  420 Topt Operating Temperature Range 40 to 85 C Tstg Storage Temperature Range 55 to 125 C PD mW ) For Power Dissipation, please refer to PACKAGE INFORMATION. ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings is not assured. 6 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 ELECTRICAL CHARACTERISTICS VINSet VOUT1V, IOUT1mA, CINCOUT 1F, unless otherwise noted. The specification in is checked and guaranteed by design engineering at 40C   Topt   85C.  RP200x Symbol VOUT IOUT VOUT /IOUT VDIF Topt25C Item Output Voltage (Fast Mode) Conditions Min. 0.99 1.01 V VOUT  2.0V 20 20 mV IOUT5mA 40C  Topt  85C VOUT > 2.0V 0.975 1.015 V VOUT  2.0V 50 30 mV mA 300 VOUT > 2.0V 1.0 1.0 % VOUT  2.0V 20 20 mV 35 80 mV 0.8V  VOUT < 0.9V 0.62 0.85 0.9V  VOUT < 1.0V 0.55 0.78 1.0V  VOUT < 1.5V 0.48 0.70 1.5V  VOUT < 2.6V 0.34 0.50 2.6V  VOUT  4.0V 0.23 0.35 VOUT  1.85V 1.0 4.0 VOUT > 1.85V 1.5 4.0 1mA  IOUT  10mA IOUT300mA ISS1 Supply Current (Low Power Mode)1 IOUT0mA ISS2 Supply Current (Fast Mode) IOUT10mA 55 Standby Current VCEGND 0.1 Istandby IOUTH IOUTL Fast Mode switch-over IOUTLight load to Heavy load current Low Power Mode switchIOUTHeavy load to Light load over current VOUT /VIN Line Regulation RR Ripple Rejection (Fast Mode) VIN Input Voltage2 VOUT /Topt ISC Unit VOUT > 2.0V 10mA  IOUT  300mA Dropout Voltage Max. IOUT5mA Topt25C Output Current Load Regulation Typ. 1.0 IOUT1mA VOUT0.5VVIN5.0V, (Low Power Mode) VIN  1.4V IOUT10mA (Fast Mode) V A A 1.0 A 8.0 mA 2.0 mA 0.50 %/V 0.02 f1kHz, Ripple 0.2Vp-p VINVOUT1V, IOUT30mA (In case that VOUT  1.2V, VIN2.2V) 0.20 70 1.40 dB 5.25 V Output Voltage Temperature Coefficient 40C  Topt  85C 50 ppm /C Short Current Limit VOUT0V 50 mA 0.1 A ICEPD CE Pull-down Constant Current VCEH CE Input Voltage "H" 1.0 V 7 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 Symbol Item Conditions VCEL CE Input Voltage "L" IAEPD AE Pull-down Constant Current3 VAEH AE Input Voltage "H"3 VAEL AE Input Voltage "L" 3 RLOW Low Output Nch Tr. ON Resistance (of D version) Min. Typ. Max. Unit 0.4 V A 0.1 V 1.0 0.4 VIN4.0V, VCE0V 50 V  All of units are tested and specified under load conditions such that Tj≈Topt25C except for Ripple Rejection, Output Voltage Temperature Coefficient. 1) The value of supply current is excluding the Pull-down constant current of CE Pin and AE Pin. 2) The maximum Input Voltage of the ELECTRICAL CHARACTERISTICS is 5.25V. In case of exceeding this specification, the IC must be operated on condition that the Input Voltage is up to 5.5V and the total operating time is within 500hrs. 3) Applied to RP200K/N/Q RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS) All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions. 8 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 TYPICAL APPLICATION VDD VOUT VOUT C2 C1 RP200x Series AE CE GND (External Components) C1, C2 : Ceramic Capacitor 1.0F MURATA: GRM155B31A105KE15 TECHNICAL NOTES When using these ICs, consider the following points: Phase Compensation In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, use a capacitor C2 with 1.0F or more and good ESR (Equivalent Series Resistance). (Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for phase compensation, the operation might be unstable. Because of this, test these ICs with as same external components as ones to be used on the PCB.) PCB Layout Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result. Connect a capacitor C1 with a capacitance value as much as 1.0F or more between VDD and GND pin, and as close as possible to the pins. Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring as short as possible. Impedance of Input Pin (CE Pin and AE Pin) In those ICs, there is a pull-down constant current in the CE Pin and the AE Pin. However, if those pins are floating and wired long that produce the noise environment, it might miss-operation of ICs. For this purpose, please make sure enough evaluation of ICs. 9 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 TEST CIRCUITS VDD C1 VOUT IOUT V RP200x Series GND CE VOUT C2 AE Basic Test Circuit VDD ISS A C1 VOUT VOUT C2 RP200x Series GND CE AE Test Circuit for Supply Current VDD Pulse Generator P.G. VOUT C2 IOUT RP200x Series GND CE AE Test Circuit for Ripple Rejection VDD C1 VOUT RP200x Series GND CE VOUT C2 IOUT a IOUT b AE Test Circuit for Load Transient Response 10 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current (C11.0F, C21.0F, Topt25C) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 RP200x18xx VIN=1.4V VIN=1.8V VIN=2.8V VIN=3.8V VIN=5.25V 0 Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x08xx 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 100 200 300 400 500 600 700 Output Current IOUT (mA) VIN=2.8V VIN=3.8V VIN=5.25V VIN=5.5V 0 100 200 300 400 500 600 700 Output Current IOUT (mA) 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 RP200x40xx Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x28xx VIN=3.8V VIN=5.25V VIN=5.5V 0 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 100 200 300 400 500 600 700 Output Current IOUT (mA) VIN=5.0V VIN=5.25V VIN=5.5V 0 100 200 300 400 500 600 700 Output Current IOUT (mA) 2) Output Voltage vs. Input Voltage (C11.0F, C21.0F, Topt25C) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 RP200x18xx IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 Input Voltage VIN (V) 5 Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x08xx 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 Input Voltage VIN (V) 5 11 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 RP200x40xx IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 Input Voltage VIN (V) Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x28xx 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 5 IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 Input Voltage VIN (V) 5 3) Supply Current vs. Input Voltage (C11.0F, C21.0F, Topt25C) 100 90 80 70 60 50 40 30 20 10 0 RP200x18xx IOUT=0mA IOUT=10mA 0 1 2 3 4 Input Voltage VIN (V) Supply Current ISS (μA) Supply Current ISS (μA) RP200x08xx 100 90 80 70 60 50 40 30 20 10 0 5 IOUT=0mA IOUT=10mA 0 1 100 90 80 70 60 50 40 30 20 10 0 IOUT=0mA IOUT=10mA 0 12 1 2 3 4 Input Voltage VIN (V) 5 RP200x40xx 5 Supply Current ISS (μA) Supply Current ISS (μA) RP200x28xx 2 3 4 Input Voltage VIN (V) 100 90 80 70 60 50 40 30 20 10 0 IOUT=0mA IOUT=10mA 0 1 2 3 4 Input Voltage VIN (V) 5 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 4) Supply Current vs. Output Current (C11.0F, C21.0F, Topt25C) RP200x08xx 100 80 VIN=1.8V 0.1mA 150mA Low Power Mode to Fast Mode 150mA 0.1mA Fast Mode to Low Power Mode 60 40 20 0 0.1 1 10 100 Output Current IOUT (mA) VIN=2.8V 120 Supply Current ISS (μA) Supply Current ISS (μA) 120 RP200x18xx 0.1mA 150mA Low Power Mode to Fast Mode 150mA 0.1mA Fast Mode to Low Power Mode 100 80 60 40 20 0 0.1 1000 1 10 100 Output Current IOUT (mA) RP200x28xx 100 80 RP200x40xx VIN=3.8V 0.1mA 150mA Low Power Mode to Fast Mode 150mA 0.1mA Fast Mode to Low Power Mode 60 40 20 0 0.1 120 Supply Current ISS (μA) Supply Current ISS (μA) 120 1000 1 10 100 Output Current IOUT (mA) 100 80 VIN=5.0V 0.1mA 150mA Low Power Mode to Fast Mode 150mA 0.1mA Fast Mode to Low Power Mode 60 40 20 0 0.1 1000 1 10 100 Output Current IOUT (mA) 1000 5) Output Voltage vs. Temperature (C11.0F, C21.0F, IOUT5mA) 0.85 0.84 0.83 0.82 0.81 0.80 0.79 0.78 0.77 0.76 0.75 -40 -25 RP200x18xx VIN=1.8V Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x08xx 0 25 50 Temperature (°C) 75 85 1.85 1.84 1.83 1.82 1.81 1.80 1.79 1.78 1.77 1.76 1.75 -40 -25 VIN=2.8V 0 25 50 Temperature (°C) 75 85 13 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 2.85 2.84 2.83 2.82 2.81 2.80 2.79 2.78 2.77 2.76 2.75 -40 -25 RP200x40xx VIN=3.8V Output Voltage VOUT (V) Output Voltage VOUT (V) RP200x28xx 0 25 50 Temperature (°C) 75 85 4.05 4.04 4.03 4.02 4.01 4.00 3.99 3.98 3.97 3.96 3.95 -40 -25 VIN=5V 0 25 50 Temperature (°C) 75 85 6) Supply Current vs. Temperature (C11.0F, C21.0F) RP200x08xx 2.5 3.0 Supply Current ISS (μA) Supply Current ISS (μA) 3.0 RP200x18xx (Auto ECO Low Power Mode) VIN=1.8V AE=0V 2.0 1.5 1.0 0.5 0 -40 -25 0 25 50 Temperature Topt (°C) (Auto ECO Low Power Mode) VIN=2.8V AE=0V 2.5 2.0 1.5 1.0 0.5 0 -40 -25 75 85 RP200x28xx 2.5 2.0 1.5 1.0 0.5 0 -40 -25 14 0 25 50 Temperature Topt (°C) 75 85 RP200x40xx (Auto ECO Low Power Mode) VIN=3.8V AE=0V 3.0 Supply Current ISS (μA) Supply Current ISS (μA) 3.0 0 25 50 Temperature Topt (°C) 75 85 (Auto ECO Low Power Mode) VIN=5V AE=0V 2.5 2.0 1.5 1.0 0.5 0 -40 -25 0 25 50 Temperature Topt (°C) 75 85 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x08xx (Fixed Fast Mode) VIN=1.8V AE=1.8V 55 50 45 40 35 30 25 -40 -25 0 25 50 Temperature Topt (°C) VIN=2.8V AE=2.8V 55 Supply Current ISS (μA) Supply Current ISS (μA) RP200x18xx (Fixed Fast Mode) 50 45 40 35 30 25 -40 -25 75 85 RP200x28xx (Fixed Fast Mode) 45 40 35 30 0 25 50 Temperature Topt (°C) VIN=5V AE=5V 55 Supply Current ISS (μA) Supply Current ISS (μA) 50 25 -40 -25 75 85 RP200x40xx (Fixed Fast Mode) VIN=3.8V AE=3.8V 55 0 25 50 Temperature Topt (°C) 50 45 40 35 30 25 -40 -25 75 85 0 25 50 Temperature Topt (°C) 75 85 7) Dropout Voltage vs. Output Current (C11.0F, C21.0F) RP200x08xx RP200x09xx 700 700 Dropout Voltage VDIF (mV) Dropout Voltage VDIF (mV) 800 85°C 25°C -40°C 600 500 400 300 200 100 0 600 85°C 25°C -40°C 500 400 300 200 100 0 0 100 200 Output Current IOUT (mA) 300 0 100 200 Output Current IOUT (mA) 300 15 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x10xx RP200x15xx 450 600 Dropout Voltage VDIF (mV) Dropout Voltage VDIF (mV) 700 85°C 25°C -40°C 500 400 300 200 100 0 85°C 25°C -40°C 400 350 300 250 200 150 100 50 0 0 100 200 Output Current IOUT (mA) 0 300 RP200x26xx 300 250 Dropout Voltage VDIF (mV) Dropout Voltage VDIF (mV) 300 85°C 25°C -40°C 200 150 100 50 0 85°C 25°C -40°C 250 200 150 100 50 0 0 100 200 Output Current IOUT (mA) 300 8) Dropout Voltage vs Set Output Voltage 700 Dropout Voltage VDIF (mV) 300 RP200x40xx 350 600 500 400 300mA 200mA 100mA 30mA 20mA 10mA 300 200 100 0 0.5 16 100 200 Output Current IOUT (mA) 1.5 2.5 3.5 Set Output Voltage VREG (V) 0 100 200 Output Current IOUT (mA) 300 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 9) Ripple Rejection vs. Input Bias Voltage (C1none, C21.0F, Ripple0.2Vp-p, Topt25C) RP200x28xx RP200x28xx (Auto ECO Low Power Mode) IOUT=1mA AE=0V (Fixed Fast Mode) IOUT=1mA AE=Set VOUT+1V 90 80 f=100Hz f=1kHz f=10kHz f=100kHz 70 60 Ripple Rejection RR (dB) Ripple Rejection RR (dB) 90 50 40 30 20 10 0 2.8 3.3 3.8 4.3 4.8 Input Voltage VIN (V) 80 70 60 50 40 20 10 0 2.8 5.3 f=100Hz f=1kHz f=10kHz f=100kHz 30 3.3 3.8 4.3 4.8 Input Voltage VIN (V) RP200x28xx RP200x28xx (Auto ECO Fast Mode) IOUT=50mA AE=0V 90 90 80 80 70 60 50 f=100Hz f=1kHz f=10kHz f=100kHz 30 20 10 0 2.8 3.3 3.8 4.3 4.8 Input Voltage VIN (V) Ripple Rejection RR (dB) Ripple Rejection RR (dB) (Auto ECO Fast Mode) IOUT=30mA AE=0V 40 5.3 70 60 50 40 20 10 0 2.8 5.3 f=100Hz f=1kHz f=10kHz f=100kHz 30 3.3 3.8 4.3 4.8 Input Voltage VIN (V) 5.3 10) Ripple Rejection vs. Frequency (C1none, C21.0F, Ripple0.2Vp-p, Topt25C) RP200x08xx IOUT=1mA (AE="L") IOUT=1mA (AE="H") IOUT=30mA IOUT=50mA 100 80 60 40 20 0 0.1 1 10 100 Frequency f (kHz) 1000 VIN=2.8V+0.2Vp-p 120 Ripple Rejection RR (dB) 120 Ripple Rejection RR (dB) RP200x18xx VIN=1.8V+0.2Vp-p IOUT=1mA (AE="L") IOUT=1mA (AE="H") IOUT=30mA IOUT=50mA 100 80 60 40 20 0 0.1 1 10 100 Frequency f (kHz) 1000 17 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x28xx VIN=3.8V+0.2Vp-p 120 IOUT=1mA (AE="L") IOUT=1mA (AE="H") IOUT=30mA IOUT=50mA 100 80 60 40 20 0 0.1 1 10 100 Frequency f (kHz) VIN=5.0V+0.2Vp-p 120 Ripple Rejection RR (dB) Ripple Rejection RR (dB) RP200x40xx 80 60 40 20 0 0.1 1000 IOUT=1mA (AE="L") IOUT=1mA (AE="H") IOUT=30mA IOUT=50mA 100 1 10 100 Frequency f (kHz) 1000 11) Input Transient Response (C1none, C21.0F, trtf5s, Topt25C) RP200x08xx RP200x18xx 1.85 1.83 1.81 1.79 1.77 1.75 1.73 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) RP200x28xx RP200x40xx 6 5 4 3 2 1 0 Output Voltage 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) 18 Output Voltage VOUT (V) 2.88 2.86 2.84 2.82 2.80 2.78 2.76 2.74 (Auto ECO Low Power Mode) 5.25V VIN=4.5V IOUT=1mA Input Voltage VIN (V) Output Voltage VOUT (V) (Auto ECO Low Power Mode) 4.8V VIN=3.8V IOUT=1mA Input Voltage Output Voltage Input Voltage VIN (V) Output Voltage Input Voltage 5 4 3 2 1 0 Input Voltage 4.08 4.06 4.04 4.02 4.00 3.98 3.96 3.94 6 5 4 3 2 1 0 Output Voltage 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) Input Voltage VIN (V) 0.86 0.84 0.82 0.80 0.78 0.76 0.74 4 3 2 1 0 Output Voltage VOUT (V) Input Voltage (Auto ECO Low Power Mode) VIN=2.8V 3.8V IOUT=1mA Input Voltage VIN (V) Output Voltage VOUT (V) (Auto ECO Low Power Mode) VIN=1.8V 2.8V IOUT=1mA RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x08xx (Fixed Fast Mode) RP200x18xx (Fixed Fast Mode) Input Voltage Output Voltage Input Voltage 1.798 1.796 1.794 1.792 1.790 1.788 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) Output Voltage 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) RP200x40xx (Fixed Fast Mode) RP200x28xx (Fixed Fast Mode) 6 5 4 3 2 1 0 Input Voltage 2.802 2.800 2.798 2.796 2.794 Output Voltage Output Voltage VOUT (V) 5.25V VIN=4.5V IOUT=30mA Input Voltage VIN (V) Output Voltage VOUT (V) 4.8V VIN=3.8V IOUT=30mA 6 5 4 3 2 1 0 Input Voltage 4.001 3.999 3.997 3.995 3.993 3.991 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) Output Voltage Input Voltage VIN (V) 0.798 0.796 0.794 0.792 0.790 5 4 3 2 1 0 Input Voltage VIN (V) 4 3 2 1 0 Output Voltage VOUT (V) 3.8V VIN=2.8V IOUT=30mA Input Voltage VIN (V) Output Voltage VOUT (V) VIN=1.8V 2.8V IOUT=30mA 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) 12) Load Transient Response (C11.0F, C21.0F, trtf0.5s, Topt25C) RP200x08xx RP200x18xx Auto ECO (Low Power Mode↔Fast Mode) Auto ECO (Low Power Mode↔Fast Mode) Output Current 0mA 30mA 0.90 0.85 0.80 0.75 0.70 0.65 0.60 Output Voltage 0 50 100 150 200 250 300 350400 450 Time t (μs) 45 30 15 0 Output Current 0mA 30mA 1.85 1.80 1.75 1.70 1.65 1.60 Output Voltage Output Current IOUT (mA) 45 30 15 0 Output Voltage VOUT (V) VIN=2.8V AE=0V Output Current IOUT (mA) Output Voltage VOUT (V) VIN=1.8V AE=0V 0 50 100 150 200 250 300 350400 450 Time t (μs) 19 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x08xx RP200x18xx Output Current 50mA 100mA 1.83 1.81 1.79 1.77 1.75 1.73 1.71 0 20 40 60 80 100 120 140160 180 Time t (μs) Output Voltage 0 20 40 60 80 100 120 140160 180 Time t (μs) RP200x08xx RP200x18xx (Fixed Fast Mode) (Fixed Fast Mode) 1.85 1.80 1.75 1.70 1.65 1.60 0 10 20 30 40 50 60 70 80 90 Time t (μs) 0 10 20 30 40 50 60 70 80 90 Time t (μs) Output Voltage 0 10 20 30 40 50 60 70 80 90 Time t (μs) 20 Output Voltage VOUT (V) 0.90 0.85 0.80 0.75 0.70 0.65 0.60 RP200x18xx Output Current IOUT (mA) Output Voltage VOUT (V) RP200x08xx Auto ECO (Low Power ModeFast Mode) VIN=1.8V AE=0V 150 100 50 Output Current 0 0.1mA 100mA Output Voltage Output Current IOUT (mA) Output Voltage Output Current 0.1mA 100mA 150 100 50 0 Auto ECO (Low Power ModeFast Mode) VIN=2.8V AE=0V 150 100 50 Output Current 0 0.1mA 100mA 1.89 1.84 1.79 1.74 1.69 1.64 1.59 Output Voltage 0 10 20 30 40 50 60 70 80 90 Time t (μs) Output Current IOUT (mA) 150 100 50 0 Output Voltage VOUT (V) 0.86 0.81 0.76 0.71 0.66 0.61 VIN=2.8V AE=2.8V Output Current IOUT (mA) Output Voltage VOUT (V) VIN=1.8V AE=1.8V Output Current 0.1mA 100mA 150 100 50 0 Output Current IOUT (mA) Output Voltage Output Voltage VOUT (V) 150 100 50 0 Output Current 50mA 100mA 0.83 0.81 0.79 0.77 0.75 0.73 0.71 (Auto ECO Fast Mode) VIN=2.8V AE=0V Output Current IOUT (mA) Output Voltage VOUT (V) (Auto ECO Fast Mode) VIN=1.8V AE=0V RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x08xx RP200x18xx (Fixed Fast Mode) (Fixed Fast Mode) Output Current 0mA 30mA Output Voltage Output Current 0mA 30mA 1.84 1.82 1.80 1.78 1.76 1.74 1.72 0 50 100 150 200 250 300 350400 450 Time t (μs) 0 50 100 150 200 250 300 350400 450 Time t (μs) Auto ECO (Low Power Mode↔Fast Mode) VIN=5.0V AE=0V 45 30 15 0 Output Current 0mA 30mA 4.05 4.00 3.95 3.90 3.85 3.80 0 50 100 150 200 250 300 350400 450 Time t (μs) Output Voltage 0 50 100 150 200 250 300 350400 450 Time t (μs) RP200x28xx RP200x40xx (Fixed Fast Mode) (Fixed Fast Mode) 45 30 15 0 Output Current 0mA 30mA Output Voltage 0 50 100 150 200 250 300 350400 450 Time t (μs) Output Voltage VOUT (V) VIN=5.0V AE=5.0V Output Current IOUT (mA) Output Voltage VOUT (V) VIN=3.8V AE=3.8V 2.82 2.80 2.78 2.76 2.74 2.72 Output Current IOUT (mA) Output Voltage Output Voltage VOUT (V) RP200x40xx Output Current IOUT (mA) Output Voltage VOUT (V) RP200x28xx Auto ECO (Low Power Mode↔Fast Mode) VIN=3.8V AE=0V 45 30 15 0 Output Current 0mA 30mA 2.85 2.80 2.75 2.70 2.65 2.60 Output Voltage 45 30 15 0 Output Current 0mA 30mA 4.04 4.02 4.00 3.98 3.96 3.94 3.92 Output Voltage Output Current IOUT (mA) 0.83 0.81 0.79 0.77 0.75 0.73 45 30 15 0 Output Current IOUT (mA) 45 30 15 0 Output Voltage VOUT (V) VIN=2.8V AE=2.8V Output Current IOUT (mA) Output Voltage VOUT (V) VIN=1.8V AE=1.8V 0 50 100 150 200 250 300 350400 450 Time t (μs) 21 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x28xx RP200x40xx (Fixed Fast Mode) (Fixed Fast Mode) 4.05 4.00 3.95 3.90 3.85 3.80 0 10 20 30 40 50 60 70 80 90 Time t (μs) 0 10 20 30 40 50 60 70 80 90 Time t (μs) Auto ECO (Low Power ModeFast Mode) VIN=5.0V AE=0V 150 100 Output Current 50 0 0.1mA 100mA 4.05 4.00 3.95 3.90 3.85 3.80 0 10 20 30 40 50 60 70 80 90 Time t (μs) 0 10 20 30 40 50 60 70 80 90 Time t (μs) RP200x28xx RP200x40xx 150 100 50 0 Output Voltage 0 20 40 60 80 100 120 140160 180 Time t (μs) 22 Output Voltage VOUT (V) 2.84 2.82 2.80 2.78 2.76 2.74 (Auto ECO Fast Mode) VIN=5.0V AE=0V Output Current IOUT (mA) Output Voltage VOUT (V) (Auto ECO Fast Mode) VIN=3.8V AE=0V Output Current 50mA 100mA Output Voltage Output Current IOUT (mA) Output Voltage Output Voltage VOUT (V) RP200x40xx Output Current IOUT (mA) Output Voltage VOUT (V) RP200x28xx Auto ECO (Low Power ModeFast Mode) VIN=3.8V AE=0V 150 100 50 Output Current 0 0.1mA 100mA 2.89 2.84 2.79 2.74 2.69 2.64 2.59 Output Voltage Output Current IOUT (mA) Output Voltage Output Current 0.1mA 100mA 150 100 50 0 4.07 4.05 4.03 4.01 3.99 3.97 3.95 3.93 3.91 Output Current 50mA 100mA 150 100 50 0 Output Voltage 0 20 40 60 80 100 120 140160 180 Time t (μs) Output Current IOUT (mA) 2.86 2.81 2.76 2.71 2.66 2.61 150 100 50 0 Output Voltage VOUT (V) Output Current 0.1mA 100mA VIN=5.0V AE=5.0V Output Current IOUT (mA) Output Voltage VOUT (V) VIN=3.8V AE=3.8V RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 13) AE Switch Transient Response (C11.0F, C21.0F, trtf0.5s, Topt25C) RP200x08xx RP200x18xx 3 2 1 0 AE Input Voltage 1.78 1.73 1.68 1.63 1.58 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) Output Voltage 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) RP200x28xx RP200x40xx Output Voltage 6 4 2 0 AE Input Voltage 4.00 3.95 3.90 3.85 3.80 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) Output Voltage AE Input Voltage VAE (V) AE Input Voltage Output Voltage VOUT (V) IOUT=1mA 6 4 2 0 AE Input Voltage VAE (V) Output Voltage VOUT (V) IOUT=1mA 2.78 2.73 2.68 2.63 2.58 AE Input Voltage VAE (V) Output Voltage Output Voltage VOUT (V) AE Input Voltage 0.80 0.75 0.70 0.65 0.60 IOUT=1mA 3 2 1 0 AE Input Voltage VAE (V) Output Voltage VOUT (V) IOUT=1mA 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Time t (ms) 14) Turn On Speed with CE pin (C11.0F, C21.0F, Topt25C) RP200x18xx 1 IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 1.5 0 1.0 0.5 Output Voltage Output Voltage VOUT (V) 2 CE Input Voltage VIN=2.8V 3 CE Input Voltage VCE (V) Output Voltage VOUT (V) VIN=1.8V 3 2 CE Input Voltage 1 IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 3.0 0 2.0 1.0 Output Voltage CE Input Voltage VCE (V) RP200x08xx 0 0 0 40 80 Time t (μs) 120 160 0 40 80 Time t (μs) 120 160 23 RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 RP200x40xx 4 IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 3.0 2 0 Output Voltage 2.0 1.0 Output Voltage VOUT (V) Output Voltage VOUT (V) CE Input Voltage VIN=5.0V 6 CE Input Voltage VCE (V) VIN=3.8V 6 4 CE Input Voltage 2 0 Output Voltage 3.0 IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 2.0 1.0 CE Input Voltage VCE (V) RP200x28xx 0 0 0 40 80 Time t (μs) 120 160 0 40 80 Time t (μs) 120 160 15) Turn Off Speed with CE pin (D Version) (C11.0F, C21.0F, Topt25C) RP200x18xx 1 0 1.5 0.5 IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 0 2 0 3.0 2.0 Output Voltage 1.0 100 200 Time t (μs) 300 400 0 RP200x28xx 2 CE Input Voltage 0 Output Voltage IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 1.0 300 400 VIN=5.0V 0 Output Voltage VOUT (V) 4 2.0 100 200 Time t (μs) 6 CE Input Voltage VCE (V) Output Voltage VOUT (V) IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA RP200x40xx VIN=3.8V 6 4 2 CE Input Voltage 0 4.5 Output Voltage IOUT=0mA IOUT=1mA IOUT=30mA IOUT=100mA 3.0 1.5 0 0 24 1 CE Input Voltage 0 0 3.0 3 100 200 Time t (μs) 300 400 0 100 200 Time t (μs) 300 400 CE Input Voltage VCE (V) 1.0 Output Voltage Output Voltage VOUT (V) 2 CE Input Voltage VIN=2.8V 3 CE Input Voltage VCE (V) Output Voltage VOUT (V) VIN=1.8V CE Input Voltage VCE (V) RP200x08xx RP200Q (SC-88A) is the discontinued product as of January 2017. RP200x NO.EA-182-170126 ESR vs. Output Current Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be used. The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The conditions when the white noise level is under 40V (Avg.) are marked as the hatched area in the graph. Measurement conditions Frequency Band : 10Hz to 2MHz Temperature : 40C to 85C C1, C2 : 1.0F RP200x08xx RP200x18xx VIN=1.4V to 5.25V 1000 VIN=1.8V to 5.25V 1000 Topt=85°C 100 Topt=85°C 100 ESR (Ω) ESR (Ω) Topt=-40°C 10 1 0.1 Topt=-40°C 10 1 0.1 0.01 0.01 0 50 100 150 200 250 Output Current IOUT (mA) 300 0 RP200x28xx 300 RP200x40xx VIN=2.8V to 5.25V 1000 VIN=4.0V to 5.25V 1000 Topt=85°C 100 Topt=85°C 100 Topt=-40°C ESR (Ω) Topt=-40°C ESR (Ω) 50 100 150 200 250 Output Current IOUT (mA) 10 1 0.1 10 1 0.1 0.01 0.01 0 50 100 150 200 250 Output Current IOUT (mA) 300 0 50 100 150 200 250 Output Current IOUT (mA) 300 25 1. The products and the product specifications described in this document are subject to change or discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to use the products, please refer to Ricoh sales representatives for the latest information thereon. 2. The materials in this document may not be copied or otherwise reproduced in whole or in part without prior written consent of Ricoh. 3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or otherwise taking out of your country the products or the technical information described herein. 4. The technical information described in this document shows typical characteristics of and example application circuits for the products. The release of such information is not to be construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual property rights or any other rights. 5. The products listed in this document are intended and designed for use as general electronic components in standard applications (office equipment, telecommunication equipment, measuring instruments, consumer electronic products, amusement equipment etc.). Those customers intending to use a product in an application requiring extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic control system, automotive and transportation equipment, combustion equipment, safety devices, life support system etc.) should first contact us. 6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor products are likely to fail with certain probability. In order to prevent any injury to persons or damages to property resulting from such failure, customers should be careful enough to incorporate safety measures in their design, such as redundancy feature, fire containment feature and fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from misuse or inappropriate use of the products. 7. Anti-radiation design is not implemented in the products described in this document. 8. The X-ray exposure can influence functions and characteristics of the products. Confirm the product functions and characteristics in the evaluation stage. 9. WLCSP products should be used in light shielded environments. The light exposure can influence functions and characteristics of the products under operation or storage. 10. There can be variation in the marking when different AOI (Automated Optical Inspection) equipment is used. In the case of recognizing the marking characteristic with AOI, please contact Ricoh sales or our distributor before attempting to use AOI. 11. Please contact Ricoh sales representatives should you have any questions or comments concerning the products or the technical information. Halogen Free Ricoh is committed to reducing the environmental loading materials in electrical devices with a view to contributing to the protection of human health and the environment. Ricoh has been providing RoHS compliant products since April 1, 2006 and Halogen-free products since April 1, 2012. https://www.e-devices.ricoh.co.jp/en/ Sales & Support Offices Ricoh Electronic Devices Co., Ltd. Shin-Yokohama Office (International Sales) 2-3, Shin-Yokohama 3-chome, Kohoku-ku, Yokohama-shi, Kanagawa, 222-8530, Japan Phone: +81-50-3814-7687 Fax: +81-45-474-0074 Ricoh Americas Holdings, Inc. 675 Campbell Technology Parkway, Suite 200 Campbell, CA 95008, U.S.A. Phone: +1-408-610-3105 Ricoh Europe (Netherlands) B.V. Semiconductor Support Centre Prof. W.H. Keesomlaan 1, 1183 DJ Amstelveen, The Netherlands Phone: +31-20-5474-309 Ricoh International B.V. - German Branch Semiconductor Sales and Support Centre Oberrather Strasse 6, 40472 Düsseldorf, Germany Phone: +49-211-6546-0 Ricoh Electronic Devices Korea Co., Ltd. 3F, Haesung Bldg, 504, Teheran-ro, Gangnam-gu, Seoul, 135-725, Korea Phone: +82-2-2135-5700 Fax: +82-2-2051-5713 Ricoh Electronic Devices Shanghai Co., Ltd. Room 403, No.2 Building, No.690 Bibo Road, Pu Dong New District, Shanghai 201203, People's Republic of China Phone: +86-21-5027-3200 Fax: +86-21-5027-3299 Ricoh Electronic Devices Shanghai Co., Ltd. Shenzhen Branch 1205, Block D(Jinlong Building), Kingkey 100, Hongbao Road, Luohu District, Shenzhen, China Phone: +86-755-8348-7600 Ext 225 Ricoh Electronic Devices Co., Ltd. Taipei office Room 109, 10F-1, No.51, Hengyang Rd., Taipei City, Taiwan (R.O.C.) Phone: +886-2-2313-1621/1622 Fax: +886-2-2313-1623
RP200K291D-TR 价格&库存

很抱歉,暂时无法提供与“RP200K291D-TR”相匹配的价格&库存,您可以联系我们找货

免费人工找货