HPP3-10RJ8

HPP Series High Pulse Power Wire Wound Resistors • • • • • • • Superior Pulse Handling Capabilities Power Ratings from 3 to 10 watts Standard Resistance values from 10 to 20K Ohms High Temperature: -55°C to +350°C (“V” Rating ) Resistance Tolerances to ± 2% Low TCR: ± 20ppm/°K Standard Flame Resistant Silicone Coated Power Resistor SPECIFICATIONS Type Power Rating ( Watts ) 1 U HPP3 HPP5 HPP10 3.0 5.0 10 V 3.5 6.5 13 Available Values W2 Pulse Rating ( Joules ) 3 10 18 50 5.8 500 5.8 1000 4.25 4500 3 7500 2.2 500 5.8 1000 11.6 4500 19 7500 13 10000 9.4 1000 42 4500 52 7500 54 10000 42 20000 34 Dimensions A B C Maximum Working Voltage ±0.062” [±1.6mm] ±0.031” [±0.8mm] ±0.002” [±0.05mm] 0.500 [12.7] 0.200 [5.1] 0.032 [0.8] 140 0.875 [22.2] 0.312 [7.9] 0.040 [1.0] 360 1.780 [45.2] 0.375 [9.5] 0.040 [1.0] 850 1 Additional power ratings may be available upon request, please consult factory Other resistance values may be available upon request, please consult factory 3 Higher ratings are available. Please see information regarding pulse rating at the end of this datasheet 2 Riedon Inc. © Riedon, Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com sales@riedon.com (626) 284-1704 Revised: 201812_002 HPP Series High Pulse Power Wire Wound Resistors SPECIFICATIONS (continued) Specification Value Tolerances ±2% to ±10% ( 5% Standard ) Temperature Coefficient >10W : ±20ppm/K 1W to10W : ±50ppm/K