HVC2512H-10MJ8

HVC Series High Resistance, Thick Film Chip Resistors • • • • • • • • Resistances from 10M to 1T Ohms Power Rating 0.05 to 1.5 Watts Resistance Tolerances to ± 0.25% TCR’s to ± 25 ppm/°C Non-Magnetic High Value Thick Film Resistance Element Sizes, 0402, 0603, 0805, 1206, 1210, 2512, 4020 Special High Temperature Version to 300°C (H) (See ordering Information below) SPECIFICATIONS Type 0402 5 0603 6 0805 6 1206 1210 2512 4020 Power Rating ( W )4 0.05 0.10 0.125 0.25 0.35 1.01 2.01 Trimmed 30 75 100 200 300 1500 4000 Untrimmed (> 5%) 60 150 200 400 600 2000 6000 Working Voltage ( VAC ) Tolerances Available ( % ) Temperature Coefficients Available ( ± ppm/°C )2 Voltage Coefficients Available ( ppm / V )3 Resistance Range (Ω) 10M - 100M 5 /10 / 20% 50, 100 500 ppm/V 1/5/10/20% 50, 100 500 ppm/V .5/1/5/10/ 20% 50, 100 500 ppm/V .5/1/5/10/ 20% 25, 50, 100 250 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V .25/.5/1/5/10% 25, 50, 100 10 ppm/V >100M - 500M 5 /10 / 20% 100, 250 1000 ppm/V 2/5/10/20% 100, 250 500 ppm/V 2/5/10/20% 100, 250 500 ppm/V 2/5/10/20% 50, 100, 250 500 ppm/V 2/5/10/20% 50, 100, 250 250 ppm/V 1/5/10/20% 25, 50, 100 50 ppm/V .5/1/5/10/20% 25, 50, 100 25 ppm/V >500M - 1G 5 /10 / 20% 250, 500 1000 ppm/V 5 /10 / 20% 250, 500 500 ppm/V 5 /10 / 20% 250, 500 500 ppm/V 5 /10 / 20% 100, 250 500 ppm/V 5 /10 / 20% 100, 250 250 ppm/V 1/5/10/20% 100, 250 50 ppm/V 1/5/10/20% 25, 50, 100 25 ppm/V >1G - 10G 10 / 20 / 30% 1000, 2000 2000 ppm/V 5/10/20/30% 500, 1000 1000 ppm/V 5 / 10 / 20% 500, 1000 1000 ppm/V 5 / 10 / 20% 500, 1000 500 ppm/V 5 / 10 / 20% 250, 500 250 ppm/V 2/5/10/20% 100, 250 100 ppm/V 2/5/10/20% 50, 100 50 ppm/V >10G - 100G 10 / 20 / 30% 2000, 3000 5000 ppm/V 10 / 20 / 30% 1000, 2000 3000 ppm/V 10 / 20 / 30% 1000, 2000 3000 ppm/V 10 / 20 / 30% 1000, 2000 1000 ppm/V 5 / 10 / 20% 500, 1000 500 ppm/V 5 / 10 / 20% 250, 500 250 ppm/V 5/10/20/30% 100, 250 100 ppm/V >100G - 1T On Request On Request See HVS See HVS 10 / 20 / 30% 1000, 2000 2000 ppm/V 10 / 20 / 30% 500, 1000 1000 ppm/V 10 / 20 / 30% 500 / 1000 500 ppm/V 1) Solder pads must have sufficient heat conduction 2) TCR in ppm/K; +25°C to +125°C; TCR below standard TCR (highest value) and values >100G; +25°C to +85°C 3) VCR: typical values, all negative, not for all TCR values available 4) Continuous operating voltage: V ≤ √(P*R) or max. working voltage (the lower value) 5) Best tolerance for High Temp version is 5% 6) Best tolerance for High Temp version is 2% 04/17 Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 www.riedon.com (626) 284-9901 (626) 284-1704 Page: 8 HVC Series High Resistance, Thick Film Chip Resistors Specification Value Temperature Range -55°C to +155°C (Standard) -55°C to +300°C (High Temperature Version, TCR valid +25°C to +125°C ) Climatic Category 55 / 155 / 56 Solderability 250°C, 3s Terminal Finish Platinum / Silver (PtAg) Max. Soldering Temperature 260°C, 10s Max ∆R Long Term Stability 10 GΩ Storage 125°C, 1000h