RMF25

Features: Meet Performance Requirements of JSS Std. & MIL Std. Miniature Size available for space savings. Available ranges from 10 ohm to 1M ohm. Values below range available on request. Flameproof Coating Available on request. TCR available 25,50,100ppm/°C. TYPE RMF125 RMFS40 RMF25 RMFS60 RMF50 RMFS100 RMF100 RMFS200 POWER RATING 0.125W 0.4W 0.25W 0.6W 0.5W 1W 1W 2W TOL (±) 1%,2%,5% 1% 1%,2%,5% 1% 1%,2%,5% 1%,5% 1%,5% 1%,5% L 3.3 ±0.5 3.3 ±0.5 6.5 ±0.5 6.5 ±0.5 9.5 ±1 9.5 ±1 12 ±1 12 ±1 DIMENSION (mm) H (min) D 1.7 ±0.2 1.7 ±0.2 2.3 ±0.2 2.3 ±0.2 3.5 ±0.5 3.5 ±0.5 4.5 ±0.5 4.5 ±0.5 28 28 25 25 25 25 25 25 d 0.45 ±0.05 0.45 ±0.05 0.60 ±0.05 0.60 ±0.05 0.60 ±0.05 0.60 ±0.05 0.80 ±0.05 0.80 ±0.05 Max. Working Voltage 200V 200V 250V 250V 350V 350V 500V 500V Max. Overload Voltage 400V 400V 500V 500V 700V 700V 1000V 1000V Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com Sales@Riedon.com Fax: (626) 284-1704 TEST Dielectric Withstanding Voltage Insulation Resistance Temp Cycling Short Time Overload Damp Heat Steady State Load Life Robustness of Terminations Resistance to Soldering Heat Shock (Medium Impact) Vibration (High Frequency) Low Temp. Exposure High Temp. Exposure Solderability Resistance to Solvent PROCEDURE V - Block Method, 3X Rated Voltage Duration: 1min. V - Block Method, DC 500V Duration: 1min. 5 cycles of -65°C, 25°C,155°C, 25°C 2.5 X Rated Voltage Duration: 5 seconds 40°C 95% relative humidity, Duration: 56 Days Rated Voltage at 70°C ambient Duration: 2000 hours Tensile: 10N Duration: 10 sec. Bending: 180°, > 3 bends Torsion: 3 rotation of 360° each Temp. 260°C ± 5°C Duration: 10 seconds 1 Km/S2 10 to 2000Hz: m/S2 at -65°C Duration: 2 Hrs at +155°C Duration: 16 Hrs. No Load Condition Dip Method, Solder bath Temp. 230°C ± 5°C. Duration: 5 sec. Solvent: Trichloroethylene Duration: 3 min. SPEC. R = (0.25% + 0.05 ohm) > 10,000 M ohm R = (1% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (1% + 0.05 ohm) R = (1% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (0.25% + 0.05 ohm) R = (1% + 0.05 ohm) 95% coverage Marking should be legible Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 www.riedon.com Sales@Riedon.com Fax: (626) 284-1704