1MX06-063-12

Thermoelectric module Datasheet Performance parameters Type RMT Ltd. DTmax Qmax Imax Umax AC R K 69 70 71 71 71 W 27,30 18,20 14,90 12,60 10,10 A 6,0 3,9 3,2 2,7 2,2 V Ohm 0,97 1,50 H mm 1,6 1,9 2,1 2,3 2,6 1MX06-063- xx (N=126) 1MX06-063-05 1MX06-063-08 1MX06-063-10 1MX06-063-12 1MX06-063-15 7,70 1,85 2,15 2,71 Perfomance data are given for Thot=300K vacuum Technical Drawing Ordering Options A. TEC Internal Solder: Lead-free SnSb Solder (Tmelt=230°C) C. Surface Finish (one or both) 1. Blank Cer amics 2. Metallized: 2.1 Ni- Sn plaiting 2.2 Au plaiting 3. Metallized and Pre-tinned 3.1 Solder 94 (PbSnBi,Tmelt=94°C) 3.2 Solder 117 (InSn,Tmelt=117°C) 3.3 Solder 138 ( SnBi,Tmelt=138°C) 3.4 Solder 183 ( PbSn,Tmelt=183°C) 3.5 Solder 199 ( SnZn, Tmelt=199°C) D. Thermistor (optional) NTC thermistor type TB Resistance nominal 1. 2.2 kOhm@20C 2 10.0 kOhm@20C Individual calibration is avaiable in -65..+85°C B. TEC Ceramics: 1. Pure Al2O3 (100%) 2. Alumina (Al2O3 96%) 3. Aluminium Nitride (AlN) Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 2 Thermoelectric module Datasheet 1MX06-063-05 RMT Ltd. Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 1MX06-063-08 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. w ebsite - ww w.rmtltd.ru Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 3 Thermoelectric module Datasheet 1MX06-063-10 RMT Ltd. Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 1MX06-063-12 Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Perfomance plots are created with TECCAD Software. TECCAD is available for download from RMT Ltd. w ebsite - ww w.rmtltd.ru Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 4 Thermoelectric module Datasheet 1MX06-063-15 RMT Ltd. Standard Performance Plots Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax Applications Tips Cautions 1. Do not heat TE module more than 200oC (TEC assembled at 230oC) or 160oC (optional TEC s assembled at 183oC). 2. Do not use TE module w ithout attached heat sink at hot (bottom) side. 3. Connect TE sub-mount to a DC power supply in acccordance to polarity. 4. Do not apply DC current higher than Imax. Installation 1. Mechanical Mounting TEC is placed betw een two heat exchangers . This construction is fixed by screws or in another mechanical way. It is suitable for large modules (with dimensions 30mmx30mm and larger). 2. Soldering This method is suitable for a TE module with metallized outside surfaces (cold and hot sides). RMT provides this option and also makes pre-tinning for TE modules. 3. Glueing A glue is usually based on some epoxy compound filled with some thermoconductive material such as gr aphite or diamond powders, silver, SiN and others. The application of a specific type depends on application features and the type of a TE module. Definitions Value DTmax Qmax Imax Umax Rt -xx Thot H Description Maximum temperature difference at I=Imax Maximum heat pumping capacity at I=Imax Maximum current Maximum voltage drop Header thermal resistance Ther moelectric pellet length code TEC hot side temperature Total TEC height Not es rated at Qmax=0, at other Q it should be estimated as DT= DTmax(1-Q/Qmax) rated at DT=0, at other DT it should be estimated as Q=Qmax(1-DT/DTmax) Electric parameters resulting in greatest DTmax Pellet length is "-xx" x 10 (in mm) Performance data shown in specifications are given for Thot=300 K, vacuum All dimensions are given in mm Copyright 2007. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 5