2MP04-096-10

Specifications 2MP04-096 Series ∆Tmax Qmax Imax Umax AC R Ohm K W A V 2MP04-096-xx (N=96+96) 2МP04-096-10 2МP04-096-12 2МP04-096-15 92 95 98 2.45 2.26 1.99 1.65 1.66 1.66 4.70 4.97 5.25 2.32 2.42 2.53 3.2 3.4 3.7 1 1.2 1.5 H mm h mm RMT Ltd. Type Perfomance data are given for Thot=300K vacuum Technical Drawing Ordering Options A. TEC Assembly: 1.Solder PbSn (Tmelt=183°C) 2.Solder SnSb (Tmelt=230°C) B. Ceramics: 1.Pure Al2O3 (100%) 2.Alumina (Al2O3 - 96%) 3.Aluminum Nitride (AlN) C. Surface Finish (one or both): D. Thermistor can be mounted 1. Clear ceramics on edge of cold side ceramics 2. Metallized: Calibration is available. 2.1 Ni / Sn(Bi) 2.2 Gold plating 3. Metallized and pre-tinned: 3.1 Rose alloy (Pb-Sn-Bi, Tmelt=94°C) 3.2 Solder 117 (In-Sn, Tmelt=117°C) 3.3 Solder 138 (Sn-Bi, Tmelt=138°C) 3.4 Solder 183 (Pb-Sn, Tmelt=183°C) RMTK 170.00.00 Copyright 2005. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. 431 2MP04-096 Series 2MP04-096-10 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 RMT Ltd. Standard Perfomance Plots DT, K DT, K Imax 0.8 Imax 0.6 Imax 0.4 Imax 2.0 2.5 Current, A Q, W 2.00 1.75 1.50 5 4 Qhot , W 100 U, V 3 2 1 0 0 10 20 30 40 Imax 0.8 Imax 0.6 Imax 0.4 Imax 50 60 70 80 90 1.25 1.00 0.75 0.50 0.25 0.00 0 10 20 30 40 DT, K DT, K 50 60 70 80 90 100 2MP04-096-12 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 Standard Perfomance Plots DT, K DT, K Imax 0.8 Imax 0.6 Imax 0.4 Imax 1.0 1.5 2.0 2.5 Current, A Q, W 2.0 5.0 4.0 3.0 2.0 1.0 0.0 0 10 20 30 40 Imax 0.8 Imax 0.6 Imax 0.4 Imax 50 60 70 80 90 100 1.5 Qhot , W U, V 1.0 0.5 0.0 DT, K 0 10 20 30 40 DT, K 50 60 70 80 90 100 Perfomance plots are created with TECCAD Software. TECCAD is available for free download from RMT Ltd. website - www.rmtltd.ru 53 Leninskij prosp. Moscow 119991 Russia, phones: 7-095-132-6817, 7-095-132-6685, fax: 7-095-132-5870, e-mail: rmtcom@dol.ru Copyright 2005. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. RMTK 170.00.00 432 2MP04-096 Series 2MP04-096-15 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 RMT Ltd. Standard Perfomance Plots DT, K DT, K Imax 0.8 Imax 0.6 Imax 0.4 Imax 2.0 Current, A Q, W 6 5 1.5 3 2 1 0 0 10 20 30 40 Imax 0.8 Imax 0.6 Imax 0.4 Imax 50 60 70 80 90 100 Qhot , W 4 1.0 U, V 0.5 0.0 DT, K 0 10 20 30 DT, K 40 50 60 70 Application tips Cautions 1. Never heat TE module more than 160oC (TEC assembled at 183oC) or 200oC (TEC assembled at 230oC). 2. Never use TE module without attached heat sink at hot (bottom) side. 3. Connect TE module to DC power supply according to polarity 4. Do not apply DC current higher than Imax. Installation 1. Mechanical Mounting TEC is placed between two heat exchangers . This construction is fixed by screws or in another mechanical way. It is suitable for large modules (with dimensions 30mmx30mm and larger). Miniature types require other assembling methods. 2. Soldering This method is suitable for a TE module with metallized outside surfaces (cold and hot sides). RMT provides this option and also makes pre-tinning for TE modules. In comparison with a mechanical assembling method, soldering requires careful procedures. 3. Glueing It is an up-to-date method that is used by many customers due to availability of glues with good thermoconductive properties. A glue is usually based on some epoxy compound filled with some thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a specific type depends on application features and the type of a TE module. 53 Leninskij prosp. Moscow 119991 Russia, phones: 7-095-132-6817, 7-095-132-6685, fax: 7-095-132-5870, e-mail: rmtcom@dol.ru Copyright 2005. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. RMTK 170.00.00 433 2MP04-096 Series RMT Ltd. 53 Leninskij prosp. Moscow 119991 Russia, phones: 7-095-132-6817, 7-095-132-6685, fax: 7-095-132-5870, e-mail: rmtcom@dol.ru Copyright 2005. RMT Ltd. The design and specifications of products can be changed by RMT Ltd. without notice. RMTK 170.00.00 434